* [PATCH v2 1/2] dt-bindings: clock: Drop incorrect usage of double '::'
From: Krzysztof Kozlowski @ 2026-06-23 5:48 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Peter Griffin, Alim Akhtar, Michael Turquette,
Stephen Boyd, Brian Masney, Sylwester Nawrocki, Chanwoo Choi,
Sam Protsenko, Rob Clark, Dmitry Baryshkov, Abhinav Kumar,
Jessica Zhang, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Inki Dae, Seung-Woo Kim, Kyungmin Park,
Andi Shyti, Georgi Djakov, Lee Jones, Pavel Machek, Hans Verkuil,
Mauro Carvalho Chehab, Ulf Hansson, Vinod Koul, Neil Armstrong,
Linus Walleij, Geert Uytterhoeven, Magnus Damm, Sebastian Reichel,
Javier Martinez Canillas, Liam Girdwood, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Srinivas Kandagatla,
Bartlomiej Zolnierkiewicz, Rafael J. Wysocki, Daniel Lezcano,
Zhang Rui, Lukasz Luba, Jonathan Marek, Taniya Das, Robert Marko,
Christian Marangi, Stephan Gerhold, Adam Skladowski,
Sireesh Kodali, Barnabas Czeman, Imran Shaik,
Sricharan Ramabadhran, Anusha Rao, Luo Jie, Tomasz Figa,
Chanho Park, Sunyeal Hong, Shin Son, Krishna Manikandan,
Jacek Anaszewski, Jaehoon Chung, Marek Szyprowski, Alina Yu,
Andy Gross, Niklas Söderlund, Wesley Cheng, linux-arm-msm,
devicetree, linux-kernel, linux-arm-kernel, linux-samsung-soc,
linux-clk, dri-devel, freedreno, linux-i2c, linux-pm, linux-leds,
linux-media, linux-mmc, linux-phy, linux-gpio, linux-renesas-soc,
linux-serial, linux-sound, linux-usb
Cc: Krzysztof Kozlowski, Conor Dooley
There is no use of double colon '::' in YAML. OTOH, the literal style
block, e.g. using '|' treats all characters as content [1] therefore
single use of ':' in descriptions is perfectly fine, whenever '|' is
used.
Cleanup existing code, so the confusing style won't be re-used in new
contributions.
Link: https://yaml.org/spec/1.2.2/#literal-style [1]
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
I split the patches to avoid bounces from mailing list due to email size.
This can go via clock tree (no dependencies)... or both could go via
Rob's tree.
Changes in v2:
1. Add tags (partial Reviews as Acks, as that's the meaning of Ack)
---
.../devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-apq8064.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-apq8084.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-ipq6018.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-ipq8064.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-mdm9607.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-mdm9615.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-msm8660.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-msm8909.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-msm8916.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-msm8953.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-msm8974.yaml | 2 +-
.../devicetree/bindings/clock/qcom,gcc-sdm660.yaml | 2 +-
Documentation/devicetree/bindings/clock/qcom,gpucc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,ipq5018-gcc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,ipq9574-gcc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,qca8k-nsscc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml | 2 +-
Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml | 2 +-
.../devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 2 +-
Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 2 +-
.../devicetree/bindings/clock/samsung,exynos5260-clock.yaml | 6 +++---
.../devicetree/bindings/clock/samsung,exynos5410-clock.yaml | 2 +-
.../devicetree/bindings/clock/samsung,exynos5433-clock.yaml | 2 +-
.../devicetree/bindings/clock/samsung,exynos7-clock.yaml | 2 +-
.../devicetree/bindings/clock/samsung,exynos850-clock.yaml | 2 +-
.../bindings/clock/samsung,exynosautov9-clock.yaml | 2 +-
.../bindings/clock/samsung,exynosautov920-clock.yaml | 2 +-
.../devicetree/bindings/clock/samsung,s5pv210-clock.yaml | 2 +-
32 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 53a5ab319159..6863db9bd092 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm display clock control module provides the clocks, resets and power
domains on SM8150/SM8250/SM8350.
- See also::
+ See also:
include/dt-bindings/clock/qcom,dispcc-sm8150.h
include/dt-bindings/clock/qcom,dispcc-sm8250.h
include/dt-bindings/clock/qcom,dispcc-sm8350.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 27df7e3e5bf3..68532244901e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on APQ8064.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-msm8960.h
include/dt-bindings/reset/qcom,gcc-msm8960.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
index 0a0a26d9beab..1c022e75fd71 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on APQ8084.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-apq8084.h
include/dt-bindings/reset/qcom,gcc-apq8084.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
index 4d2614d4f368..c7fb84438db7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq6018.yaml
@@ -15,7 +15,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on IPQ6018.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-ipq6018.h
include/dt-bindings/reset/qcom,gcc-ipq6018.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
index a71557395c01..b4d3175780bc 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on IPQ8064.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
include/dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml
index d7da30b0e7ee..0a7be7583bdd 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9607.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-mdm9607.h
allOf:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml
index 418dea31eb62..0656d5ee448d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-mdm9615.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-mdm9615.h
allOf:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
index e03b6d0acdb6..70c9da1f35c2 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks and resets on
MSM8660
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-msm8660.h
include/dt-bindings/reset/qcom,gcc-msm8660.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
index ce1f5a60bd8c..2edb6c251d99 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8909, MSM8917 or QM215.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-msm8909.h
include/dt-bindings/clock/qcom,gcc-msm8917.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
index 258b6b93deca..af4b639ea8c3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8916 or MSM8939.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-msm8916.h
include/dt-bindings/clock/qcom,gcc-msm8939.h
include/dt-bindings/reset/qcom,gcc-msm8916.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
index ced3118c8580..fc0360554f68 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
@@ -15,7 +15,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8937, MSM8940, MSM8953 or SDM439.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-msm8917.h
include/dt-bindings/clock/qcom,gcc-msm8953.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
index 929fafc84c19..378dfe7854ac 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
@@ -15,7 +15,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on MSM8974 (all variants) and MSM8226.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
include/dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
index 724ce0491118..72aaf699cf70 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on SDM630, SDM636 and SDM660
- See also::
+ See also:
include/dt-bindings/clock/qcom,gcc-sdm660.h (qcom,gcc-sdm630 and qcom,gcc-sdm660)
$ref: qcom,gcc.yaml#
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 4cdff6161bf0..3ac4419009a9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm graphics clock control module provides the clocks, resets and power
domains on Qualcomm SoCs.
- See also::
+ See also:
include/dt-bindings/clock/qcom,gpucc-sdm845.h
include/dt-bindings/clock/qcom,gpucc-sa8775p.h
include/dt-bindings/clock/qcom,gpucc-sc7180.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
index 489d0fc5607c..9925b931ecad 100644
--- a/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5018-gcc.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on IPQ5018
- See also::
+ See also:
include/dt-bindings/clock/qcom,ipq5018-gcc.h
include/dt-bindings/reset/qcom,ipq5018-gcc.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
index 27ae9938febc..5b128fa841aa 100644
--- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm global clock control module provides the clocks, resets and power
domains on IPQ9574
- See also::
+ See also:
include/dt-bindings/clock/qcom,ipq9574-gcc.h
include/dt-bindings/reset/qcom,ipq9574-gcc.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
index 61473385da2d..3da10c364a85 100644
--- a/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm NSS clock control module provides the clocks and resets
on QCA8386(switch mode)/QCA8084(PHY mode)
- See also::
+ See also:
include/dt-bindings/clock/qcom,qca8k-nsscc.h
include/dt-bindings/reset/qcom,qca8k-nsscc.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml
index 734880805c1b..bedbdabef672 100644
--- a/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-gpucc.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm graphics clock control module provides the clocks, resets and power
domains on Qualcomm SoCs.
- See also::
+ See also:
include/dt-bindings/clock/qcom,qcm2290-gpucc.h
properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
index ab97d4b7dba8..b6c835bfd0d9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -12,7 +12,7 @@ maintainers:
description: |
The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
- come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+ come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock is
an "active" clock, which means that the consumer only care that the clock is
available when the apps CPU subsystem is active, i.e. not suspended or in
deep idle. If it is important that the clock keeps running during system
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
index 99ab9106009f..fd06ac9bceb9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm LPASS core and audio clock control module provides the clocks and
power domains on SC7280.
- See also::
+ See also:
include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
index 273d66e245c5..f235b4e24cc7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm LPASS core and audio clock control module provides the clocks,
and reset on SC8280XP.
- See also::
+ See also:
include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h
properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml
index 8cbab3fbb660..d7e1938b5e1b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-lpasscc.yaml
@@ -14,7 +14,7 @@ description: |
Qualcomm LPASS core and audio clock controllers provide audio-related resets
on SM6115 and its derivatives.
- See also::
+ See also:
include/dt-bindings/clock/qcom,sm6115-lpasscc.h
properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
index 5c2ecec0624e..a986ab4ce7c7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm video clock control module provides the clocks, resets and power
domains on Qualcomm SoCs.
- See also::
+ See also:
include/dt-bindings/clock/qcom,videocc-sm8350.h
include/dt-bindings/reset/qcom,videocc-sm8350.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index f4ff9acef9d5..124d259fc85e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -13,7 +13,7 @@ description: |
Qualcomm video clock control module provides the clocks, resets and power
domains on Qualcomm SoCs.
- See also::
+ See also:
include/dt-bindings/clock/qcom,sm6350-videocc.h
include/dt-bindings/clock/qcom,videocc-sc7180.h
include/dt-bindings/clock/qcom,videocc-sc7280.h
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
index b05f83533e3d..56ab972c3da5 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -14,17 +14,17 @@ maintainers:
description: |
Expected external clocks, defined in DTS as fixed-rate clocks with a matching
- name::
+ name:
- "fin_pll" - PLL input clock from XXTI
- "xrtcxti" - input clock from XRTCXTI
- "ioclk_pcm_extclk" - pcm external operation clock
- "ioclk_spdif_extclk" - spdif external operation clock
- "ioclk_i2s_cdclk" - i2s0 codec clock
- Phy clocks::
+ Phy clocks:
There are several clocks which are generated by specific PHYs. These clocks
are fed into the clock controller and then routed to the hardware blocks.
- These clocks are defined as fixed clocks in the driver with following names::
+ These clocks are defined as fixed clocks in the driver with following names:
- "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
index b737c9d35a1c..1d907dd8fbf1 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -14,7 +14,7 @@ maintainers:
description: |
Expected external clocks, defined in DTS as fixed-rate clocks with a matching
- name::
+ name:
- "fin_pll" - PLL input clock from XXTI
All available clocks are defined as preprocessor macros in
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
index 3f9326e09f79..8a289f1e2ace 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -14,7 +14,7 @@ maintainers:
description: |
Expected external clocks, defined in DTS as fixed-rate clocks with a matching
- name::
+ name:
- "oscclk" - PLL input clock from XXTI
All available clocks are defined as preprocessor macros in
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
index c137c6744ef9..a51cd4fafb41 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -14,7 +14,7 @@ maintainers:
description: |
Expected external clocks, defined in DTS as fixed-rate clocks with a matching
- name::
+ name:
- "fin_pll" - PLL input clock from XXTI
All available clocks are defined as preprocessor macros in
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
index cdc5ded59fe5..68c2fd318765 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -17,7 +17,7 @@ description: |
Exynos850 clock controller is comprised of several CMU units, generating
clocks for different domains. Those CMU units are modeled as separate device
tree nodes, and might depend on each other. Root clocks in that clock tree are
- two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+ two external clocks: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
clocks must be defined as fixed-rate clocks in dts.
CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
index 32f39e543b36..e9d17d48b4f3 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -17,7 +17,7 @@ description: |
Exynos Auto v9 clock controller is comprised of several CMU units, generating
clocks for different domains. Those CMU units are modeled as separate device
tree nodes, and might depend on each other. Root clocks in that clock tree are
- two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+ two external clocks: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
The external OSCCLK must be defined as fixed-rate clock in dts.
CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
index 6b1fc61a2ff9..475db824d4d3 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml
@@ -17,7 +17,7 @@ description: |
ExynosAuto v920 clock controller is comprised of several CMU units, generating
clocks for different domains. Those CMU units are modeled as separate device
tree nodes, and might depend on each other. Root clocks in that clock tree are
- two external clocks:: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+ two external clocks: OSCCLK/XTCXO (38.4 MHz) and RTCCLK/XrtcXTI (32768 Hz).
The external OSCCLK must be defined as fixed-rate clock in dts.
CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
index 67a33665cf00..b1617d96d3fb 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -14,7 +14,7 @@ maintainers:
description: |
Expected external clocks, defined in DTS as fixed-rate clocks with a matching
- name::
+ name:
- "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
the SoC,
- "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
--
2.53.0
^ permalink raw reply related
* RE: [PATCH 1/2] dt-bindings: clock: Drop incorrect usage of double '::'
From: Alim Akhtar @ 2026-06-22 11:42 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Bjorn Andersson',
'Konrad Dybcio', 'Rob Herring',
'Krzysztof Kozlowski', 'Conor Dooley',
'Peter Griffin', 'Michael Turquette',
'Stephen Boyd', 'Brian Masney',
'Sylwester Nawrocki', 'Chanwoo Choi',
'Sam Protsenko', 'Rob Clark',
'Dmitry Baryshkov', 'Abhinav Kumar',
'Jessica Zhang', 'Sean Paul',
'Marijn Suijten', 'David Airlie',
'Simona Vetter', 'Maarten Lankhorst',
'Maxime Ripard', 'Thomas Zimmermann',
'Inki Dae', 'Seung-Woo Kim',
'Kyungmin Park', 'Andi Shyti',
'Georgi Djakov', 'Lee Jones',
'Pavel Machek', 'Hans Verkuil',
'Mauro Carvalho Chehab', 'Ulf Hansson',
'Peter Rosin', 'Vinod Koul',
'Neil Armstrong', 'Linus Walleij',
'Geert Uytterhoeven', 'Magnus Damm',
'Sebastian Reichel', 'Javier Martinez Canillas',
'Liam Girdwood', 'Mark Brown',
'Greg Kroah-Hartman', 'Jiri Slaby',
'Srinivas Kandagatla',
'Bartlomiej Zolnierkiewicz', 'Rafael J. Wysocki',
'Daniel Lezcano', 'Zhang Rui',
'Lukasz Luba', 'Jonathan Marek',
'Taniya Das', 'Robert Marko',
'Christian Marangi', 'Stephan Gerhold',
'Adam Skladowski', 'Sireesh Kodali',
'Barnabas Czeman', 'Imran Shaik',
'Sricharan Ramabadhran', 'Anusha Rao',
'Luo Jie', 'Tomasz Figa', 'Chanho Park',
'Sunyeal Hong', 'Shin Son',
'Krishna Manikandan', 'Jacek Anaszewski',
'Jaehoon Chung', 'Marek Szyprowski',
'Alina Yu', 'Andy Gross',
'Niklas Söderlund', 'Wesley Cheng',
linux-arm-msm, devicetree, linux-kernel, linux-arm-kernel,
linux-samsung-soc, linux-clk, dri-devel, freedreno, linux-i2c,
linux-pm, linux-leds, linux-media, linux-mmc, linux-phy,
linux-gpio, linux-renesas-soc, linux-serial, linux-sound,
linux-usb, cpgs
In-Reply-To: <20260622101606.485961-3-krzysztof.kozlowski@oss.qualcomm.com>
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Sent: Monday, June 22, 2026 3:46 PM
> To: Bjorn Andersson <andersson@kernel.org>; Konrad Dybcio
> <konradybcio@kernel.org>; Rob Herring <robh@kernel.org>; Krzysztof
> Kozlowski <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>;
> Peter Griffin <peter.griffin@linaro.org>; Alim Akhtar
> <alim.akhtar@samsung.com>; Michael Turquette
> <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org>; Brian
> Masney <bmasney@redhat.com>; Sylwester Nawrocki
[Snip]
> Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 2 +-
> .../devicetree/bindings/clock/samsung,exynos5260-clock.yaml | 6 +++---
> .../devicetree/bindings/clock/samsung,exynos5410-clock.yaml | 2 +-
> .../devicetree/bindings/clock/samsung,exynos5433-clock.yaml | 2 +-
> .../devicetree/bindings/clock/samsung,exynos7-clock.yaml | 2 +-
> .../devicetree/bindings/clock/samsung,exynos850-clock.yaml | 2 +-
> .../bindings/clock/samsung,exynosautov9-clock.yaml | 2 +-
> .../bindings/clock/samsung,exynosautov920-clock.yaml | 2 +-
> .../devicetree/bindings/clock/samsung,s5pv210-clock.yaml | 2 +-
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
^ permalink raw reply
* RE: [PATCH 2/2] dt-bindings: Drop incorrect usage of double '::'
From: Alim Akhtar @ 2026-06-22 11:45 UTC (permalink / raw)
To: 'Krzysztof Kozlowski', 'Bjorn Andersson',
'Konrad Dybcio', 'Rob Herring',
'Krzysztof Kozlowski', 'Conor Dooley',
'Peter Griffin', 'Michael Turquette',
'Stephen Boyd', 'Brian Masney',
'Sylwester Nawrocki', 'Chanwoo Choi',
'Sam Protsenko', 'Rob Clark',
'Dmitry Baryshkov', 'Abhinav Kumar',
'Jessica Zhang', 'Sean Paul',
'Marijn Suijten', 'David Airlie',
'Simona Vetter', 'Maarten Lankhorst',
'Maxime Ripard', 'Thomas Zimmermann',
'Inki Dae', 'Seung-Woo Kim',
'Kyungmin Park', 'Andi Shyti',
'Georgi Djakov', 'Lee Jones',
'Pavel Machek', 'Hans Verkuil',
'Mauro Carvalho Chehab', 'Ulf Hansson',
'Peter Rosin', 'Vinod Koul',
'Neil Armstrong', 'Linus Walleij',
'Geert Uytterhoeven', 'Magnus Damm',
'Sebastian Reichel', 'Javier Martinez Canillas',
'Liam Girdwood', 'Mark Brown',
'Greg Kroah-Hartman', 'Jiri Slaby',
'Srinivas Kandagatla',
'Bartlomiej Zolnierkiewicz', 'Rafael J. Wysocki',
'Daniel Lezcano', 'Zhang Rui',
'Lukasz Luba', 'Jonathan Marek',
'Taniya Das', 'Robert Marko',
'Christian Marangi', 'Stephan Gerhold',
'Adam Skladowski', 'Sireesh Kodali',
'Barnabas Czeman', 'Imran Shaik',
'Sricharan Ramabadhran', 'Anusha Rao',
'Luo Jie', 'Tomasz Figa', 'Chanho Park',
'Sunyeal Hong', 'Shin Son',
'Krishna Manikandan', 'Jacek Anaszewski',
'Jaehoon Chung', 'Marek Szyprowski',
'Alina Yu', 'Andy Gross',
'Niklas Söderlund', 'Wesley Cheng',
linux-arm-msm, devicetree, linux-kernel, linux-arm-kernel,
linux-samsung-soc, linux-clk, dri-devel, freedreno, linux-i2c,
linux-pm, linux-leds, linux-media, linux-mmc, linux-phy,
linux-gpio, linux-renesas-soc, linux-serial, linux-sound,
linux-usb, cpgs
In-Reply-To: <20260622101606.485961-4-krzysztof.kozlowski@oss.qualcomm.com>
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Sent: Monday, June 22, 2026 3:46 PM
> To: Bjorn Andersson <andersson@kernel.org>; Konrad Dybcio
> <konradybcio@kernel.org>; Rob Herring <robh@kernel.org>; Krzysztof
> Kozlowski <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>;
> Peter Griffin <peter.griffin@linaro.org>; Alim Akhtar
> <alim.akhtar@samsung.com>; Michael Turquette
> <mturquette@baylibre.com>; Stephen Boyd <sboyd@kernel.org>; Brian
> Masney <bmasney@redhat.com>; Sylwester Nawrocki
[Snip]
> soc@vger.kernel.org; linux-serial@vger.kernel.org; linux-
> sound@vger.kernel.org; linux-usb@vger.kernel.org
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Subject: [PATCH 2/2] dt-bindings: Drop incorrect usage of double '::'
>
> There is no use of double colon '::' in YAML. OTOH, the literal style block, e.g.
> using '|' treats all characters as content [1] therefore single use of ':' in
> descriptions is perfectly fine, whenever '|' is used.
>
> Cleanup existing code, so the confusing style won't be re-used in new
> contributions.
>
> Link: https://protect2.fireeye.com/v1/url?k=20b000b4-490b6806-20b18bfb-
> 905a08a8515a-b42887ea7482314e&q=1&e=9fffcc8f-6266-432d-a638-
> 208efe86c9d7&u=https%3A%2F%2Fyaml.org%2Fspec%2F1.2.2%2F%23literal-
> style [1]
> Signed-off-by: Krzysztof Kozlowski
> <krzysztof.kozlowski@oss.qualcomm.com>
>
For Samsung IPs related
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
^ permalink raw reply
* [PATCH 1/1] gpio: davinci: fix IRQ domain leak on devm_kzalloc failure
From: fffsqian @ 2026-06-23 2:31 UTC (permalink / raw)
To: Keerthy, Linus Walleij, Bartosz Golaszewski
Cc: linux-kernel, linux-gpio, Qingshuang Fu
From: Qingshuang Fu <fuqingshuang@kylinos.cn>
In davinci_gpio_irq_setup(), after successfully creating an IRQ domain
with irq_domain_create_legacy(), a subsequent devm_kzalloc() failure
in the bank loop causes the function to return -ENOMEM without
removing the IRQ domain.
Unlike devm-managed resources, irq_domain_create_legacy() does not
auto-clean up on probe failure, so the domain is leaked.
Fix by calling irq_domain_remove() before returning on allocation
failure.
Fixes: b5cf3fd827d2 ("gpio: davinci: Redesign driver to accommodate ngpios in one gpio chip")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
---
drivers/gpio/gpio-davinci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 97780f27ce5b..270cd7c88812 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -568,8 +568,10 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
sizeof(struct
davinci_gpio_irq_data),
GFP_KERNEL);
- if (!irqdata)
+ if (!irqdata) {
+ irq_domain_remove(chips->irq_domain);
return -ENOMEM;
+ }
irqdata->regs = g;
irqdata->bank_num = bank;
base-commit: 4708cac0e22cfd217f48f7cec3c35e5922efcccd
--
2.25.1
^ permalink raw reply related
* Re: [PATCH 2/2] dt-bindings: Drop incorrect usage of double '::'
From: Sebastian Reichel @ 2026-06-22 20:37 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Peter Griffin, Alim Akhtar, Michael Turquette,
Stephen Boyd, Brian Masney, Sylwester Nawrocki, Chanwoo Choi,
Sam Protsenko, Rob Clark, Dmitry Baryshkov, Abhinav Kumar,
Jessica Zhang, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Inki Dae, Seung-Woo Kim, Kyungmin Park,
Andi Shyti, Georgi Djakov, Lee Jones, Pavel Machek, Hans Verkuil,
Mauro Carvalho Chehab, Ulf Hansson, Peter Rosin, Vinod Koul,
Neil Armstrong, Linus Walleij, Geert Uytterhoeven, Magnus Damm,
Javier Martinez Canillas, Liam Girdwood, Mark Brown,
Greg Kroah-Hartman, Jiri Slaby, Srinivas Kandagatla,
Bartlomiej Zolnierkiewicz, Rafael J. Wysocki, Daniel Lezcano,
Zhang Rui, Lukasz Luba, Jonathan Marek, Taniya Das, Robert Marko,
Christian Marangi, Stephan Gerhold, Adam Skladowski,
Sireesh Kodali, Barnabas Czeman, Imran Shaik,
Sricharan Ramabadhran, Anusha Rao, Luo Jie, Tomasz Figa,
Chanho Park, Sunyeal Hong, Shin Son, Krishna Manikandan,
Jacek Anaszewski, Jaehoon Chung, Marek Szyprowski, Alina Yu,
Andy Gross, Niklas Söderlund, Wesley Cheng, linux-arm-msm,
devicetree, linux-kernel, linux-arm-kernel, linux-samsung-soc,
linux-clk, dri-devel, freedreno, linux-i2c, linux-pm, linux-leds,
linux-media, linux-mmc, linux-phy, linux-gpio, linux-renesas-soc,
linux-serial, linux-sound, linux-usb
In-Reply-To: <20260622101606.485961-4-krzysztof.kozlowski@oss.qualcomm.com>
[-- Attachment #1: Type: text/plain, Size: 789 bytes --]
Hi,
On Mon, Jun 22, 2026 at 12:16:08PM +0200, Krzysztof Kozlowski wrote:
> There is no use of double colon '::' in YAML. OTOH, the literal style
> block, e.g. using '|' treats all characters as content [1] therefore
> single use of ':' in descriptions is perfectly fine, whenever '|' is
> used.
>
> Cleanup existing code, so the confusing style won't be re-used in new
> contributions.
>
> Link: https://yaml.org/spec/1.2.2/#literal-style [1]
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>
> ---
>
> Intention for this patch is to go via Rob's tree.
> ---
[...]
> .../bindings/power/reset/restart-handler.yaml | 8 ++++----
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[...]
Greetings,
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* Re: [PATCH 1/2] dt-bindings: clock: Drop incorrect usage of double '::'
From: Conor Dooley @ 2026-06-22 16:50 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Peter Griffin, Alim Akhtar, Michael Turquette,
Stephen Boyd, Brian Masney, Sylwester Nawrocki, Chanwoo Choi,
Sam Protsenko, Rob Clark, Dmitry Baryshkov, Abhinav Kumar,
Jessica Zhang, Sean Paul, Marijn Suijten, David Airlie,
Simona Vetter, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, Inki Dae, Seung-Woo Kim, Kyungmin Park,
Andi Shyti, Georgi Djakov, Lee Jones, Pavel Machek, Hans Verkuil,
Mauro Carvalho Chehab, Ulf Hansson, Peter Rosin, Vinod Koul,
Neil Armstrong, Linus Walleij, Geert Uytterhoeven, Magnus Damm,
Sebastian Reichel, Javier Martinez Canillas, Liam Girdwood,
Mark Brown, Greg Kroah-Hartman, Jiri Slaby, Srinivas Kandagatla,
Bartlomiej Zolnierkiewicz, Rafael J. Wysocki, Daniel Lezcano,
Zhang Rui, Lukasz Luba, Jonathan Marek, Taniya Das, Robert Marko,
Christian Marangi, Stephan Gerhold, Adam Skladowski,
Sireesh Kodali, Barnabas Czeman, Imran Shaik,
Sricharan Ramabadhran, Anusha Rao, Luo Jie, Tomasz Figa,
Chanho Park, Sunyeal Hong, Shin Son, Krishna Manikandan,
Jacek Anaszewski, Jaehoon Chung, Marek Szyprowski, Alina Yu,
Andy Gross, Niklas Söderlund, Wesley Cheng, linux-arm-msm,
devicetree, linux-kernel, linux-arm-kernel, linux-samsung-soc,
linux-clk, dri-devel, freedreno, linux-i2c, linux-pm, linux-leds,
linux-media, linux-mmc, linux-phy, linux-gpio, linux-renesas-soc,
linux-serial, linux-sound, linux-usb
In-Reply-To: <20260622101606.485961-3-krzysztof.kozlowski@oss.qualcomm.com>
[-- Attachment #1: Type: text/plain, Size: 583 bytes --]
On Mon, Jun 22, 2026 at 12:16:07PM +0200, Krzysztof Kozlowski wrote:
> There is no use of double colon '::' in YAML. OTOH, the literal style
> block, e.g. using '|' treats all characters as content [1] therefore
> single use of ':' in descriptions is perfectly fine, whenever '|' is
> used.
>
> Cleanup existing code, so the confusing style won't be re-used in new
> contributions.
>
> Link: https://yaml.org/spec/1.2.2/#literal-style [1]
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply
* [PATCH v18 1/4] pinctrl: renesas: rzg2l: Add SD channel POC support for RZ/G3L
From: Biju @ 2026-06-22 16:48 UTC (permalink / raw)
To: Geert Uytterhoeven, Linus Walleij
Cc: Biju Das, linux-renesas-soc, linux-gpio, linux-kernel,
Prabhakar Mahadev Lad, Biju Das
In-Reply-To: <20260622164819.184674-1-biju.das.jz@bp.renesas.com>
From: Biju Das <biju.das.jz@bp.renesas.com>
Add power-on control (POC) support for SD channels 1 and 2 on the RZ/G3L
SoC (r9a08g046).
Introduce PIN_CFG_IO_VMC_SD2 capability flag (bit 22) and SD_CH2_POC
register offset (0x3024). Extend rzg2l_caps_to_pwr_reg() to return
SD_CH2_POC when PIN_CFG_IO_VMC_SD2 is set.
Replace RZG3L_MPXED_PIN_FUNCS() with RZG2L_MPXED_COMMON_PIN_FUNCS() for
port PG and PH pins, dropping PIN_CFG_SOFT_PS which is inappropriate for
SD pins, and annotate them with PIN_CFG_IO_VMC_SD1 and PIN_CFG_IO_VMC_SD2
respectively.
Annotate all RZ/G3L SD0 dedicated pins (CLK, CMD, RST#, DS, DAT0–DAT7)
with PIN_CFG_IO_VMC_SD0 so that power-source register lookups work
correctly for those pins.
Add sd_ch2 field to rzg2l_register_offsets and rzg2l_pinctrl_reg_cache to
save and restore the SD_CH2_POC register across suspend/resume cycles.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v17->v18:
* Moved sd_ch2 variable near to sd_ch[].
v1->v17:
* No change.
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 74 +++++++++++++++++--------
1 file changed, 50 insertions(+), 24 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index be52d47d77ae..e3e24ce917c9 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -69,6 +69,7 @@
#define PIN_CFG_PVDD1833_OTH_AWO_POC BIT(19) /* known on RZ/G3L only */
#define PIN_CFG_PVDD1833_OTH_ISO_POC BIT(20) /* known on RZ/G3L only */
#define PIN_CFG_WDTOVF_N_POC BIT(21) /* known on RZ/G3L only */
+#define PIN_CFG_IO_VMC_SD2 BIT(22) /* known on RZ/G3L only */
#define RZG2L_SINGLE_PIN BIT_ULL(63) /* Dedicated pin */
#define RZG2L_VARIABLE_CFG BIT_ULL(62) /* Variable cfg for port pins */
@@ -254,6 +255,7 @@ static const struct pin_config_item renesas_rzv2h_conf_items[] = {
* struct rzg2l_register_offsets - specific register offsets
* @pwpr: PWPR register offset
* @sd_ch: SD_CH register offset
+ * @sd_ch2: SD_CH2_POC register offset
* @eth_poc: ETH_POC register offset
* @oen: OEN register offset
* @qspi: QSPI register offset
@@ -262,6 +264,7 @@ static const struct pin_config_item renesas_rzv2h_conf_items[] = {
struct rzg2l_register_offsets {
u16 pwpr;
u16 sd_ch;
+ u16 sd_ch2;
u16 eth_poc;
u16 oen;
u16 qspi;
@@ -368,6 +371,7 @@ struct rzg2l_pinctrl_pin_settings {
* @nod: NOD registers cache
* @clone: Clone register cache
* @sd_ch: SD_CH registers cache
+ * @sd_ch2: SD_CH2_POC registers cache
* @eth_poc: ET_POC registers cache
* @oen: Output Enable register cache
* @other_poc: OTHER_POC register cache
@@ -386,6 +390,7 @@ struct rzg2l_pinctrl_reg_cache {
u32 *nod[2];
u32 clone;
u8 sd_ch[2];
+ u8 sd_ch2;
u8 eth_poc[2];
u8 oen;
u8 other_poc;
@@ -474,20 +479,32 @@ static const u64 r9a08g046_variable_pin_cfg[] = {
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PE, 5, RZG3L_MPXED_ETH_PIN_FUNCS(ETH1)),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PE, 6, RZG3L_MPXED_ETH_PIN_FUNCS(ETH1)),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PE, 7, RZG3L_MPXED_ETH_PIN_FUNCS(ETH1)),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 0, RZG3L_MPXED_PIN_FUNCS(B)),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 1, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 2, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 3, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 4, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 5, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 0, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IO_VMC_SD1),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 1, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 2, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 3, RZG2L_MPXED_COMMON_PIN_FUNCS(B) | PIN_CFG_IEN |
+ PIN_CFG_IO_VMC_SD1),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 4, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 5, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 6, RZG3L_MPXED_PIN_FUNCS_POC(B, ISO)),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PG, 7, RZG3L_MPXED_PIN_FUNCS_POC(B, ISO)),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 0, RZG3L_MPXED_PIN_FUNCS(B)),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 1, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 2, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 3, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 4, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
- RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 5, RZG3L_MPXED_PIN_FUNCS(B) | PIN_CFG_IEN),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 0, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IO_VMC_SD2),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 1, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD2),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 2, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD2),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 3, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD2),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 4, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD2),
+ RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PH, 5, RZG2L_MPXED_COMMON_PIN_FUNCS(B) |
+ PIN_CFG_IEN | PIN_CFG_IO_VMC_SD2),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PJ, 0, RZG3L_MPXED_PIN_FUNCS(A) | PIN_CFG_IEN),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PJ, 1, RZG3L_MPXED_PIN_FUNCS(A)),
RZG2L_VARIABLE_PIN_CFG_PACK(RZG3L_PJ, 2, RZG3L_MPXED_PIN_FUNCS(A)),
@@ -1053,6 +1070,8 @@ static int rzg2l_caps_to_pwr_reg(const struct rzg2l_register_offsets *regs,
return SD_CH(regs->sd_ch, 0);
if (caps & PIN_CFG_IO_VMC_SD1)
return SD_CH(regs->sd_ch, 1);
+ if (caps & PIN_CFG_IO_VMC_SD2)
+ return regs->sd_ch2;
if (caps & PIN_CFG_IO_VMC_ETH0)
return ETH_POC(regs->eth_poc, 0);
if (caps & PIN_CFG_IO_VMC_ETH1)
@@ -2677,28 +2696,28 @@ static const struct rzg2l_dedicated_configs rzg3l_dedicated_pins[] = {
(PIN_CFG_IOLH_A | PIN_CFG_PUPD | PIN_CFG_PVDD1833_OTH_AWO_POC)) },
{ "SCIF0_TXD", RZG2L_SINGLE_PIN_PACK(0x6, 1,
(PIN_CFG_IOLH_A | PIN_CFG_PUPD | PIN_CFG_PVDD1833_OTH_AWO_POC)) },
- { "SD0_CLK", RZG2L_SINGLE_PIN_PACK(0x9, 0, PIN_CFG_IOLH_B) },
+ { "SD0_CLK", RZG2L_SINGLE_PIN_PACK(0x9, 0, PIN_CFG_IOLH_B | PIN_CFG_IO_VMC_SD0) },
{ "SD0_CMD", RZG2L_SINGLE_PIN_PACK(0x9, 1,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
- { "SD0_RST#", RZG2L_SINGLE_PIN_PACK(0x9, 2, PIN_CFG_IOLH_B) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
+ { "SD0_RST#", RZG2L_SINGLE_PIN_PACK(0x9, 2, PIN_CFG_IOLH_B | PIN_CFG_IO_VMC_SD0) },
{ "SD0_DS", RZG2L_SINGLE_PIN_PACK(0x9, 5,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT0", RZG2L_SINGLE_PIN_PACK(0x0a, 0,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT1", RZG2L_SINGLE_PIN_PACK(0x0a, 1,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT2", RZG2L_SINGLE_PIN_PACK(0x0a, 2,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT3", RZG2L_SINGLE_PIN_PACK(0x0a, 3,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT4", RZG2L_SINGLE_PIN_PACK(0x0a, 4,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT5", RZG2L_SINGLE_PIN_PACK(0x0a, 5,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT6", RZG2L_SINGLE_PIN_PACK(0x0a, 6,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DAT7", RZG2L_SINGLE_PIN_PACK(0x0a, 7,
- (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_IEN | PIN_CFG_PUPD | PIN_CFG_IO_VMC_SD0)) },
};
static const u32 r9a08g046_clone_channel_data[] = {
@@ -3672,6 +3691,9 @@ static int rzg2l_pinctrl_suspend_noirq(struct device *dev)
cache->eth_poc[i] = readb(pctrl->base + ETH_POC(regs->eth_poc, i));
}
+ if (regs->sd_ch2)
+ cache->sd_ch2 = readb(pctrl->base + regs->sd_ch2);
+
if (regs->qspi)
cache->qspi = readb(pctrl->base + regs->qspi);
cache->oen = readb(pctrl->base + pctrl->data->hwcfg->regs.oen);
@@ -3724,6 +3746,9 @@ static int rzg2l_pinctrl_resume_noirq(struct device *dev)
rzg2l_oen_write_with_pwpr(pctrl, cache->oen);
raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+ if (regs->sd_ch2)
+ writeb(cache->sd_ch2, pctrl->base + regs->sd_ch2);
+
for (u8 i = 0; i < 2; i++) {
if (regs->sd_ch)
writeb(cache->sd_ch[i], pctrl->base + SD_CH(regs->sd_ch, i));
@@ -3791,6 +3816,7 @@ static const struct rzg2l_hwcfg rzg3l_hwcfg = {
.regs = {
.pwpr = 0x3000,
.sd_ch = 0x3004,
+ .sd_ch2 = 0x3024,
.eth_poc = 0x3010,
.oen = 0x3018,
.other_poc = OTHER_POC,
--
2.43.0
^ permalink raw reply related
* [PATCH v18 0/4] Add SDHI support for RZ/G3L SoC
From: Biju @ 2026-06-22 16:48 UTC (permalink / raw)
To: Geert Uytterhoeven, Linus Walleij, Magnus Damm, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Biju Das, linux-renesas-soc, linux-gpio, devicetree, linux-kernel,
Prabhakar Mahadev Lad, Biju Das
From: Biju Das <biju.das.jz@bp.renesas.com>
This series adds pin control and device tree support for the three
SDHI (SD/MMC host interface) controllers on the Renesas RZ/G3L SoC
(r9a08g046), and enables them on the RZ/G3L SMARC EVK platform.
This patch series depend on [1]
[1] https://lore.kernel.org/all/20260622155610.184271-1-biju.das.jz@bp.renesas.com/
v18:
* Split from patch series [2]
* Moved sd_ch2 variable near to sd_ch[].
[2] https://lore.kernel.org/all/20260603065731.93243-1-biju.das.jz@bp.renesas.com/
Biju Das (4):
pinctrl: renesas: rzg2l: Add SD channel POC support for RZ/G3L
arm64: dts: renesas: r9a08g046: Add SDHI nodes for RZ/G3L SoC and
SDHI1 pincontrol on SMARC EVK
arm64: dts: renesas: rzg3l-smarc-som: Enable SD/eMMC on SDHI0
arm64: dts: renesas: rzg3l-smarc-som: Enable SDHI2
arch/arm64/boot/dts/renesas/r9a08g046.dtsi | 73 ++++++-
.../boot/dts/renesas/r9a08g046l48-smarc.dts | 89 ++++++++
.../boot/dts/renesas/rzg3l-smarc-som.dtsi | 199 ++++++++++++++++++
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 74 ++++---
4 files changed, 410 insertions(+), 25 deletions(-)
--
2.43.0
^ permalink raw reply
* Re: [PATCH 2/5] iio: adc: Add ti-ads1262 driver
From: David Lechner @ 2026-06-22 16:42 UTC (permalink / raw)
To: Jonathan Cameron, Kurt Borja
Cc: Krzysztof Kozlowski, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Linus Walleij, Bartosz Golaszewski, Nuno Sá,
Andy Shevchenko, linux-iio, devicetree, linux-kernel, linux-gpio
In-Reply-To: <20260622104728.039a5ea2@jic23-huawei>
On 6/22/26 4:47 AM, Jonathan Cameron wrote:
> On Sun, 21 Jun 2026 19:18:33 -0500
> "Kurt Borja" <kuurtb@gmail.com> wrote:
>
>> On Sun Jun 21, 2026 at 9:33 AM -05, Jonathan Cameron wrote:
>>> On Mon, 15 Jun 2026 06:30:28 +0200
>>> Krzysztof Kozlowski <krzk@kernel.org> wrote:
>>>
>>>> On 14/06/2026 22:56, Kurt Borja wrote:
>>>>> On Sat Jun 13, 2026 at 1:59 PM -05, Krzysztof Kozlowski wrote:
>>>>>
>>>>> [...]
>>>>>
>>>>>> Functions used by probe() should be before probe(), not somewhere in the
>>>>>> middle of the code. IOW, entire probe is together.
>>>>>
>>>>> I they all are, it's just that regmap stuff takes a huge chunk. I'll
>>>>> check how to reorganize.
>>>>>
>>>>> [...]
>>>>>
>>>>>>> +static const struct of_device_id ads1262_of_match[] = {
>>>>>>> + { .compatible = "ti,ads1262" },
>>>>>>> + { .compatible = "ti,ads1263" },
>>>>>>
>>>>>> So devices are fully compatible? Then it should be expressed in the
>>>>>> binding and drop one entry here.
>>>>>
>>>>> Not fully compatible as Jonathan said. One is a subset of the other.
>>>>
>>>> This is THE meaning of compatible!
>>>
>>> This one I'm in agreement with. It is a strict subset, so should be
>>> using a fallback. If the fallback is used, you just get support of the
>>> stuff in the simpler chip (or if you can override it with a chip ID
>>> you might still 'upgrade' to the more complex driver support).
>>> If you do end up with properties that only apply to 'new' parts of
>>> the more complex chip then they should be verified as part of the
>>> binding (assuming you can do that without the verifier complaining
>>> - I haven't checked!)
>>
>> In v1 I had the "adc" subnode which was specific to ADS1263. Then I
>> agreed to drop the subnode but I'm having second thoughts...
>>
>> If we dropped it, then we would still have some specific stuff.
>> #io-channel-cells would be "const: 2" in ADS1263 chips. Also ADS1263's
>> channels would have an extra ti,vref-adc2 prop, for ADC2 voltage
>> reference selection. I should maybe also add a vref-adc2-supply.
>>
>> Maybe it's better to keep the subnode or, again, go for something like:
>>
>> spi {
>> multi-adc@0 {
>> adc@0 {
>> ...
>> vref-suppy = <&adc1-vref>;
>>
>> channel@0 {
>> ...
>> reference-source = <ADS1262_VREF_AIN0_AIN1>;
>> };
>> };
>> adc@1 {
>> ...
>> vref-suppy = <&adc2-vref>;
>>
>> channel@0 {
>> ...
>> reference-source = <ADS1262_VREF_AIN2_AIN3>;
>> };
>> };
>> };
>> };
>>
>> In this case we would have to kinda duplicate channel description, but I
>> don't think it's that bad.
>>
>> Jonathan, Krzysztof, David, thoughts?
>>
>> IMO the ADC2 specific voltage reference stuff is a strong argument for a
>> subnode or the above solution.
>
> Given you end up with channel specific stuff that differs I think it probably
> makes sense - though I do wonder a bit if that is real. What's the use case
> for using a different reference for the monitoring / debug than the main one?
> I could imagine some dynamic use where you want to sanity check against
> a wider reference range, but maybe that needs userspace control rather than
> in here?
I think is is going to mostly be the same, so could be simpler to just
add extra channel properties on an as-needed basis if things do actually
differ between ADC1 and ADC2 rather than having to define all channels
twice.
This seems pretty similar to the discussion of how to handle e.g. measuring
the same inputs with and without the burn-out current enabled in the
ti,ads112c14 series and I think you have convinced me that we should not
be having a separate channel in the devicetree for that either.
>
> Jonathan
>
>
>>
>>>
>>> The SLF3F discussion is about (to me) less obvious case of not a strict
>>> subset, but rather being detectable parts with different channel related
>>> properties. In that case the ID match is necessary for anything to work.
>>> Anyhow, that discussion is in a different thread and not really relevant
>>> here.
>>>
>>> Jonathan
>>>
>>>>
>>>>
>>>> Best regards,
>>>> Krzysztof
>>
>
^ permalink raw reply
* [brgl:gpio/for-current] BUILD SUCCESS 442d60df742a597dca7cca89a28a4843ce935f09
From: kernel test robot @ 2026-06-22 16:05 UTC (permalink / raw)
To: Bartosz Golaszewski; +Cc: linux-gpio
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git gpio/for-current
branch HEAD: 442d60df742a597dca7cca89a28a4843ce935f09 x86/platform/geode: reference the real node of the cs5535 GPIO controller
elapsed time: 746m
configs tested: 185
configs skipped: 2
The following configs have been built successfully.
More configs may be tested in the coming days.
tested configs:
alpha allnoconfig gcc-16.1.0
alpha allyesconfig gcc-16.1.0
alpha defconfig gcc-16.1.0
arc allmodconfig clang-23
arc allnoconfig gcc-16.1.0
arc allyesconfig clang-23
arc defconfig gcc-16.1.0
arc randconfig-001-20260622 gcc-8.5.0
arc randconfig-002-20260622 gcc-8.5.0
arm allnoconfig gcc-16.1.0
arm allyesconfig clang-23
arm defconfig gcc-16.1.0
arm randconfig-001-20260622 gcc-8.5.0
arm randconfig-002-20260622 gcc-8.5.0
arm randconfig-003-20260622 gcc-8.5.0
arm randconfig-004-20260622 gcc-8.5.0
arm64 allmodconfig clang-23
arm64 allnoconfig gcc-16.1.0
arm64 defconfig gcc-16.1.0
arm64 randconfig-001-20260622 gcc-8.5.0
arm64 randconfig-002-20260622 gcc-8.5.0
arm64 randconfig-003-20260622 gcc-8.5.0
arm64 randconfig-004-20260622 gcc-8.5.0
csky allmodconfig gcc-16.1.0
csky allnoconfig gcc-16.1.0
csky defconfig gcc-16.1.0
csky randconfig-001-20260622 gcc-8.5.0
csky randconfig-002-20260622 gcc-8.5.0
hexagon allmodconfig gcc-16.1.0
hexagon allnoconfig gcc-16.1.0
hexagon defconfig gcc-16.1.0
hexagon randconfig-001-20260622 gcc-8.5.0
hexagon randconfig-002-20260622 gcc-8.5.0
i386 allmodconfig clang-22
i386 allnoconfig gcc-16.1.0
i386 allyesconfig clang-22
i386 buildonly-randconfig-001-20260622 gcc-14
i386 buildonly-randconfig-002-20260622 gcc-14
i386 buildonly-randconfig-003-20260622 gcc-14
i386 buildonly-randconfig-004-20260622 gcc-14
i386 buildonly-randconfig-005-20260622 gcc-14
i386 buildonly-randconfig-006-20260622 gcc-14
i386 defconfig gcc-16.1.0
i386 randconfig-001-20260622 clang-22
i386 randconfig-002-20260622 clang-22
i386 randconfig-003-20260622 clang-22
i386 randconfig-004-20260622 clang-22
i386 randconfig-005-20260622 clang-22
i386 randconfig-006-20260622 clang-22
i386 randconfig-007-20260622 clang-22
i386 randconfig-011-20260622 gcc-14
i386 randconfig-012-20260622 gcc-14
i386 randconfig-013-20260622 gcc-14
i386 randconfig-014-20260622 gcc-14
i386 randconfig-015-20260622 gcc-14
i386 randconfig-016-20260622 gcc-14
i386 randconfig-017-20260622 gcc-14
loongarch allmodconfig clang-23
loongarch allnoconfig gcc-16.1.0
loongarch defconfig clang-23
loongarch randconfig-001-20260622 gcc-8.5.0
loongarch randconfig-002-20260622 gcc-8.5.0
m68k allmodconfig gcc-16.1.0
m68k allnoconfig gcc-16.1.0
m68k allyesconfig clang-23
m68k defconfig clang-23
microblaze allnoconfig gcc-16.1.0
microblaze allyesconfig gcc-16.1.0
microblaze defconfig clang-23
mips allmodconfig gcc-16.1.0
mips allnoconfig gcc-16.1.0
mips allyesconfig gcc-16.1.0
mips qi_lb60_defconfig clang-17
nios2 allmodconfig clang-20
nios2 allnoconfig clang-23
nios2 defconfig clang-23
nios2 randconfig-001-20260622 gcc-8.5.0
nios2 randconfig-002-20260622 gcc-8.5.0
openrisc allmodconfig clang-20
openrisc allnoconfig clang-23
openrisc defconfig gcc-16.1.0
parisc allmodconfig gcc-16.1.0
parisc allnoconfig clang-23
parisc allyesconfig clang-17
parisc defconfig gcc-16.1.0
parisc randconfig-001 gcc-14.3.0
parisc randconfig-001-20260622 gcc-14.3.0
parisc randconfig-002 gcc-14.3.0
parisc randconfig-002-20260622 gcc-14.3.0
parisc64 defconfig clang-23
powerpc akebono_defconfig clang-23
powerpc allmodconfig gcc-16.1.0
powerpc allnoconfig clang-23
powerpc randconfig-001 gcc-14.3.0
powerpc randconfig-001-20260622 gcc-14.3.0
powerpc randconfig-002 gcc-14.3.0
powerpc randconfig-002-20260622 gcc-14.3.0
powerpc64 randconfig-001 gcc-14.3.0
powerpc64 randconfig-001-20260622 gcc-14.3.0
powerpc64 randconfig-002 gcc-14.3.0
powerpc64 randconfig-002-20260622 gcc-14.3.0
riscv allmodconfig clang-23
riscv allnoconfig clang-23
riscv allyesconfig clang-23
riscv defconfig gcc-16.1.0
s390 allmodconfig clang-17
s390 allnoconfig clang-23
s390 allyesconfig gcc-16.1.0
s390 defconfig gcc-16.1.0
sh allmodconfig gcc-16.1.0
sh allnoconfig clang-23
sh allyesconfig clang-17
sh defconfig gcc-14
sparc allnoconfig clang-23
sparc defconfig gcc-16.1.0
sparc randconfig-001 gcc-16.1.0
sparc randconfig-001-20260622 gcc-16.1.0
sparc randconfig-002 gcc-16.1.0
sparc randconfig-002-20260622 gcc-16.1.0
sparc sparc32_defconfig gcc-16.1.0
sparc64 allmodconfig clang-20
sparc64 defconfig gcc-14
sparc64 randconfig-001 gcc-16.1.0
sparc64 randconfig-001-20260622 gcc-16.1.0
sparc64 randconfig-002 gcc-16.1.0
sparc64 randconfig-002-20260622 gcc-16.1.0
um allmodconfig clang-17
um allnoconfig clang-23
um allyesconfig gcc-16.1.0
um defconfig gcc-14
um i386_defconfig gcc-14
um randconfig-001 gcc-16.1.0
um randconfig-001-20260622 gcc-16.1.0
um randconfig-002 gcc-16.1.0
um randconfig-002-20260622 gcc-16.1.0
um x86_64_defconfig gcc-14
x86_64 allmodconfig clang-22
x86_64 allnoconfig clang-23
x86_64 allyesconfig clang-22
x86_64 buildonly-randconfig-001 clang-22
x86_64 buildonly-randconfig-001-20260622 clang-22
x86_64 buildonly-randconfig-002 clang-22
x86_64 buildonly-randconfig-002-20260622 clang-22
x86_64 buildonly-randconfig-003 clang-22
x86_64 buildonly-randconfig-003-20260622 clang-22
x86_64 buildonly-randconfig-004 clang-22
x86_64 buildonly-randconfig-004-20260622 clang-22
x86_64 buildonly-randconfig-005 clang-22
x86_64 buildonly-randconfig-005-20260622 clang-22
x86_64 buildonly-randconfig-006 clang-22
x86_64 buildonly-randconfig-006-20260622 clang-22
x86_64 defconfig gcc-14
x86_64 kexec clang-22
x86_64 randconfig-001-20260622 clang-22
x86_64 randconfig-002-20260622 clang-22
x86_64 randconfig-003-20260622 clang-22
x86_64 randconfig-004-20260622 clang-22
x86_64 randconfig-005-20260622 clang-22
x86_64 randconfig-006-20260622 clang-22
x86_64 randconfig-011-20260622 clang-22
x86_64 randconfig-012-20260622 clang-22
x86_64 randconfig-013-20260622 clang-22
x86_64 randconfig-014-20260622 clang-22
x86_64 randconfig-015-20260622 clang-22
x86_64 randconfig-016-20260622 clang-22
x86_64 randconfig-071-20260622 gcc-14
x86_64 randconfig-072-20260622 gcc-14
x86_64 randconfig-073-20260622 gcc-14
x86_64 randconfig-074-20260622 gcc-14
x86_64 randconfig-075-20260622 gcc-14
x86_64 randconfig-076-20260622 gcc-14
x86_64 rhel-9.4 clang-22
x86_64 rhel-9.4-bpf gcc-14
x86_64 rhel-9.4-func clang-22
x86_64 rhel-9.4-kselftests clang-22
x86_64 rhel-9.4-kunit gcc-14
x86_64 rhel-9.4-ltp gcc-14
x86_64 rhel-9.4-rust clang-22
xtensa allnoconfig clang-23
xtensa allyesconfig clang-20
xtensa generic_kc705_defconfig gcc-16.1.0
xtensa randconfig-001 gcc-16.1.0
xtensa randconfig-001-20260622 gcc-16.1.0
xtensa randconfig-002 gcc-16.1.0
xtensa randconfig-002-20260622 gcc-16.1.0
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
* [PATCH v2] gpio: htc-egpio: use managed gpiochip registration
From: Pengpeng Hou @ 2026-06-22 15:32 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski; +Cc: linux-gpio, linux-kernel, pengpeng
egpio_probe() registers each nested gpio_chip with gpiochip_add_data()
but ignores the return value. If one registration fails, probe still
returns success even though one of the chips was not published to gpiolib.
Use devm_gpiochip_add_data() and fail probe if any chip registration
fails. This lets devres unwind already registered chips and prevents the
driver from publishing a partially initialized device.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
---
Changes since v1:
- Use dev_err_probe() for the gpiochip registration failure as requested by
Bartosz Golaszewski.
drivers/gpio/gpio-htc-egpio.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-htc-egpio.c b/drivers/gpio/gpio-htc-egpio.c
index 6b54474dc81c..17ca04b389cf 100644
--- a/drivers/gpio/gpio-htc-egpio.c
+++ b/drivers/gpio/gpio-htc-egpio.c
@@ -263,6 +263,7 @@ static int __init egpio_probe(struct platform_device *pdev)
struct gpio_chip *chip;
unsigned int irq, irq_end;
int i;
+ int ret;
/* Initialize ei data structure. */
ei = devm_kzalloc(&pdev->dev, sizeof(*ei), GFP_KERNEL);
@@ -340,7 +341,10 @@ static int __init egpio_probe(struct platform_device *pdev)
chip->base = pdata->chip[i].gpio_base;
chip->ngpio = pdata->chip[i].num_gpios;
- gpiochip_add_data(chip, &ei->chip[i]);
+ ret = devm_gpiochip_add_data(&pdev->dev, chip, &ei->chip[i]);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to register gpiochip %d\n", i);
}
/* Set initial pin values */
--
2.50.1
^ permalink raw reply related
* [PATCH v2] gpio: mvebu: fail probe if gpiochip registration fails
From: Pengpeng Hou @ 2026-06-22 15:31 UTC (permalink / raw)
To: Linus Walleij, Bartosz Golaszewski; +Cc: linux-gpio, linux-kernel, pengpeng
mvebu_gpio_probe() registers the GPIO chip with devm_gpiochip_add_data()
but ignores the return value. If registration fails, probe continues and
leaves later code operating on a GPIO chip that was never published to
gpiolib.
Return the registration error so the device fails probe cleanly.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
---
Changes since v1:
- Use dev_err_probe() for the gpiochip registration failure as requested by
Linus Walleij.
drivers/gpio/gpio-mvebu.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 31d880fd7b87..e92f499e3201 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -1217,7 +1217,10 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
BUG();
}
- devm_gpiochip_add_data(&pdev->dev, &mvchip->chip, mvchip);
+ err = devm_gpiochip_add_data(&pdev->dev, &mvchip->chip, mvchip);
+ if (err)
+ return dev_err_probe(&pdev->dev, err,
+ "failed to register gpiochip\n");
/* Some MVEBU SoCs have simple PWM support for GPIO lines */
if (IS_REACHABLE(CONFIG_PWM)) {
--
2.50.1
^ permalink raw reply related
* [PATCH libgpiod 4/4] build: fix incomplete dependency gate for introspection
From: Bartosz Golaszewski @ 2026-06-22 13:58 UTC (permalink / raw)
To: Linus Walleij, Vincent Fazio, Kent Gibson
Cc: brgl, linux-gpio, Bartosz Golaszewski
In-Reply-To: <20260622-build-catch2-issue-v1-0-be95e28f310b@oss.qualcomm.com>
The introspection gate in bindings/glib/meson.build only checked gir_dep,
missing g_ir_scanner and g_ir_compiler. Switch it to use the already-computed
introspection_enabled flag which checks all three.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
bindings/glib/meson.build | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/bindings/glib/meson.build b/bindings/glib/meson.build
index b8f8f53c2a4e564de1012ccb4979077e9813e7b5..c832b6abd3579449c471e7eef6649eb96a856129 100644
--- a/bindings/glib/meson.build
+++ b/bindings/glib/meson.build
@@ -90,7 +90,7 @@ libgpiod_glib_dep = declare_dependency(
include_directories: glib_inc,
)
-if opt_introspection.allowed() and gir_dep.found()
+if introspection_enabled
gnome = import('gnome')
glib_gir = gnome.generate_gir(libgpiod_glib_lib,
--
2.47.3
^ permalink raw reply related
* [PATCH libgpiod 3/4] build: fix incomplete dependency gate for glib bindings
From: Bartosz Golaszewski @ 2026-06-22 13:58 UTC (permalink / raw)
To: Linus Walleij, Vincent Fazio, Kent Gibson
Cc: brgl, linux-gpio, Bartosz Golaszewski
In-Reply-To: <20260622-build-catch2-issue-v1-0-be95e28f310b@oss.qualcomm.com>
glib_enabled only checked glib_dep and glib_mkenums, but gobject_dep, gio_dep,
and gio_unix_dep are all required by the glib binding library and examples. Add
them to the gate so a missing dep disables the feature rather than failing at
link time.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
meson.build | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/meson.build b/meson.build
index fec106c50b8acf4f6cba925b341137ba08c2a9d6..7a6306d8b494a8e576c78f33957159033ccaed46 100644
--- a/meson.build
+++ b/meson.build
@@ -126,7 +126,8 @@ if opt_bindings_glib.allowed()
gio_unix_dep = dependency('gio-unix-2.0', version: '>= 2.80', required: opt_bindings_glib)
glib_mkenums = find_program('glib-mkenums', required: opt_bindings_glib)
- glib_enabled = glib_dep.found() and glib_mkenums.found()
+ glib_enabled = (glib_dep.found() and gobject_dep.found() and gio_dep.found() and
+ gio_unix_dep.found() and glib_mkenums.found())
else
glib_enabled = false
endif
--
2.47.3
^ permalink raw reply related
* [PATCH libgpiod 2/4] build: include all test dependencies in the tests_enabled gate
From: Bartosz Golaszewski @ 2026-06-22 13:58 UTC (permalink / raw)
To: Linus Walleij, Vincent Fazio, Kent Gibson
Cc: brgl, linux-gpio, Bartosz Golaszewski
In-Reply-To: <20260622-build-catch2-issue-v1-0-be95e28f310b@oss.qualcomm.com>
threads, glib-2.0 and gio-2.0 are required by libgpiosim, gpiosim-glib,
the test harness, and the gpiod-test binary, so the tests_enabled flag
should reflect their availability just like libkmod and mount.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
meson.build | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/meson.build b/meson.build
index 6df91b7ef17502e5491b85d08d5eb777e3968c4c..fec106c50b8acf4f6cba925b341137ba08c2a9d6 100644
--- a/meson.build
+++ b/meson.build
@@ -93,7 +93,9 @@ if opt_tests.allowed()
glib_test_dep = dependency('glib-2.0', version: '>= 2.74', required: opt_tests)
gio_test_dep = dependency('gio-2.0', version: '>= 2.74', required: opt_tests)
- tests_enabled = libkmod_dep.found() and mount_dep.found()
+ tests_enabled = (libkmod_dep.found() and mount_dep.found() and
+ threads_dep.found() and glib_test_dep.found() and
+ gio_test_dep.found())
else
tests_enabled = false
endif
--
2.47.3
^ permalink raw reply related
* [PATCH libgpiod 1/4] build: don't make catch2 mandatory when C++ bindings and tests are enabled
From: Bartosz Golaszewski @ 2026-06-22 13:58 UTC (permalink / raw)
To: Linus Walleij, Vincent Fazio, Kent Gibson
Cc: brgl, linux-gpio, Bartosz Golaszewski
In-Reply-To: <20260622-build-catch2-issue-v1-0-be95e28f310b@oss.qualcomm.com>
If both C++ bindings and the test suite are allowed but catch2 is absent,
meson setup would fail the build with error(). Follow the same *_enabled
graceful handling pattern established for all other optional components:
compute cxx_tests_enabled based on whether catch2 is actually found,
emit a warning() instead of error() when it's missing, and gate the C++
tests subdir on the new flag.
Also: enter the catch2 discovery block based on tests_enabled (instead of
opt_tests.allowed()) so it only runs once the test-suite dependencies
(threads, libgpiosim) are confirmed present.
Add a "C++ tests" line to the Bindings summary section, visible only when
C++ bindings are enabled.
Closes: https://github.com/brgl/libgpiod/discussions/190
Fixes: 97bab4cc87dd ("build: replace autotools with meson & ninja")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
bindings/cxx/meson.build | 2 +-
meson.build | 23 ++++++++++++++++-------
2 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/bindings/cxx/meson.build b/bindings/cxx/meson.build
index f7f8d9c2fdf231304e3dedd8aa4fe8645da639e1..92625b5a7eca57b0d36b79ff452ed066050b577d 100644
--- a/bindings/cxx/meson.build
+++ b/bindings/cxx/meson.build
@@ -69,6 +69,6 @@ if examples_enabled
subdir('examples')
endif
-if tests_enabled
+if cxx_tests_enabled
subdir('tests')
endif
diff --git a/meson.build b/meson.build
index 0a9a20d2ae3f427f447ec6f671c065da5b8c80c6..6df91b7ef17502e5491b85d08d5eb777e3968c4c 100644
--- a/meson.build
+++ b/meson.build
@@ -98,18 +98,23 @@ else
tests_enabled = false
endif
-if opt_bindings_cxx.allowed() and opt_tests.allowed()
+if opt_bindings_cxx.allowed() and tests_enabled
catch2_test_dep = dependency('catch2-with-main', version: '>= 3.0', required: false)
- if not catch2_test_dep.found()
+ cxx_tests_enabled = catch2_test_dep.found()
+ if not cxx_tests_enabled
# Some distros don't ship pkgconfig or cmake info for catch2 but they do
# package it so check the header.
cxx = meson.get_compiler('cpp')
if cxx.has_header('catch2/catch_all.hpp')
catch2_test_dep = declare_dependency()
- else
- error('catch2 not found, unable to build tests')
+ cxx_tests_enabled = true
endif
endif
+ if not cxx_tests_enabled
+ warning('catch2 not found, C++ bindings tests will not be built')
+ endif
+else
+ cxx_tests_enabled = false
endif
if opt_bindings_glib.allowed()
@@ -204,12 +209,16 @@ summary({
'D-Bus' : dbus_enabled,
}, section: 'Components', bool_yn: true)
-summary({
- 'C++' : opt_bindings_cxx.allowed(),
+bindings_summary = {'C++' : opt_bindings_cxx.allowed()}
+if opt_bindings_cxx.allowed()
+ bindings_summary += {'C++ tests' : cxx_tests_enabled}
+endif
+bindings_summary += {
'Python' : opt_bindings_python.allowed(),
'Rust' : rust_enabled,
'GLib' : glib_enabled,
-}, section: 'Bindings', bool_yn: true)
+}
+summary(bindings_summary, section: 'Bindings', bool_yn: true)
summary({
'gpioset interactive' : libedit_dep.found(),
--
2.47.3
^ permalink raw reply related
* [PATCH libgpiod 0/4] build: fix problems with meson build option guards
From: Bartosz Golaszewski @ 2026-06-22 13:58 UTC (permalink / raw)
To: Linus Walleij, Vincent Fazio, Kent Gibson
Cc: brgl, linux-gpio, Bartosz Golaszewski
This series fixes several issues with how meson handles build options
for libgpiod. Most notably: the problem with catch2 becoming a
hard-dependency if tests and C++ bindings are merely "allowed".
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
Bartosz Golaszewski (4):
build: don't make catch2 mandatory when C++ bindings and tests are enabled
build: include all test dependencies in the tests_enabled gate
build: fix incomplete dependency gate for glib bindings
build: fix incomplete dependency gate for introspection
bindings/cxx/meson.build | 2 +-
bindings/glib/meson.build | 2 +-
meson.build | 30 +++++++++++++++++++++---------
3 files changed, 23 insertions(+), 11 deletions(-)
---
base-commit: 40538a7b48c9a6bd50d6253f86fdcb354b45073b
change-id: 20260622-build-catch2-issue-740e2193c71d
Best regards,
--
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
^ permalink raw reply
* Re: [PATCH v5 16/16] pinctrl: airoha: add support of an7563 SoC
From: Mikhail Kshevetskiy @ 2026-06-22 12:04 UTC (permalink / raw)
To: Matheus Sampaio Queiroga, Linus Walleij, Lorenzo Bianconi,
Christian Marangi, AngeloGioacchino Del Regno, Benjamin Larsson,
linux-kernel, linux-gpio, linux-mediatek, Markus Gothe
In-Reply-To: <kNxYkw2WQ92M6zgbpnkZ0w@gmail.com>
it was moved from airoha-common.h starting from v2.
On 6/22/26 14:55, Matheus Sampaio Queiroga wrote:
> Em segunda-feira, 22 de junho de 2026, às 08:30:46 Horário Padrão de Brasília,
> Mikhail Kshevetskiy escreveu:
>> +/*
>> + * shared - named RG_SW_TOD_1PPS_MODE on AN7563. Only the LAN LED mode
>> + * bits and GSW_TOD_1PPS exist on AN7563 (no 2nd I2C, I2S or PON 1PPS).
>> + */
>> +#define REG_GPIO_2ND_I2C_MODE 0x0214
>> +#define GPIO_LAN3_LED1_MODE_MASK BIT(10)
>> +#define GPIO_LAN3_LED0_MODE_MASK BIT(9)
>> +#define GPIO_LAN2_LED1_MODE_MASK BIT(8)
>> +#define GPIO_LAN2_LED0_MODE_MASK BIT(7)
>> +#define GPIO_LAN1_LED1_MODE_MASK BIT(6)
>> +#define GPIO_LAN1_LED0_MODE_MASK BIT(5)
>> +#define GPIO_LAN0_LED1_MODE_MASK BIT(4)
>> +#define GPIO_LAN0_LED0_MODE_MASK BIT(3)
>> +#define GSW_TOD_1PPS_MODE_MASK BIT(1)
>> +
>> +/* shared */
>> +#define REG_GPIO_SPI_CS1_MODE 0x0218
>> +#define GPIO_PCM_SPI_CS4_MODE_MASK BIT(21)
>> +#define GPIO_PCM_SPI_CS3_MODE_MASK BIT(20)
>> +#define GPIO_PCM_SPI_CS2_MODE_MASK BIT(18)
>> +#define GPIO_PCM_SPI_CS1_MODE_MASK BIT(17)
>> +#define GPIO_PCM_SPI_MODE_MASK BIT(16)
>> +#define GPIO_PCM2_MODE_MASK BIT(13)
>> +#define GPIO_PCM1_MODE_MASK BIT(12)
>> +#define GPIO_PCM_INT_MODE_MASK BIT(9)
>> +#define GPIO_PCM_RESET_MODE_MASK BIT(8)
>> +#define GPIO_SPI_QUAD_MODE_MASK BIT(4)
>> +#define GPIO_SPI_CS4_MODE_MASK BIT(3)
>> +#define GPIO_SPI_CS3_MODE_MASK BIT(2)
>> +#define GPIO_SPI_CS2_MODE_MASK BIT(1)
>> +#define GPIO_SPI_CS1_MODE_MASK BIT(0)
>> +
>> +#define REG_GPIO_PON_MODE 0x021c
>> +/*
>> + * AN7563 specific: route the standalone pads to their GPIO function.
>> + * 0: pad keeps its base function, 1: pad is GPIO<n>.
>> + */
>> +#define UART_RXD_GPIO_MODE_MASK BIT(22) /* GPIO37 */
>> +#define UART_TXD_GPIO_MODE_MASK BIT(21) /* GPIO36
>> */ +#define SPI_MISO_GPIO_MODE_MASK BIT(20) /*
>> GPIO35 */ +#define SPI_MOSI_GPIO_MODE_MASK BIT(19)
>> /* GPIO34 */ +#define SPI_CS_GPIO_MODE_MASK BIT(18) /*
>> GPIO33 */ +#define SPI_CLK_GPIO_MODE_MASK BIT(17) /* GPIO32
>> */ +#define I2C_SDA_GPIO_MODE_MASK BIT(16) /* GPIO31 */
>> +#define I2C_SCL_GPIO_MODE_MASK BIT(15) /* GPIO30 */ +/*
>> shared */
>> +#define GPIO_PARALLEL_NAND_MODE_MASK BIT(14)
>> +#define GPIO_SGMII_MDIO_MODE_MASK BIT(13)
>> +#define SIPO_RCLK_MODE_MASK BIT(11)
>> +/*
>> + * Note: on AN7563 GPIO_PCIE_RESET{0,1} select the GPIO function of the
>> + * PCIE_RESET pads (0: PCIe reset, 1: GPIO28/GPIO29).
>> + */
>> +#define GPIO_PCIE_RESET1_MASK BIT(10) /* GPIO29 */
>> +#define GPIO_PCIE_RESET0_MASK BIT(9) /* GPIO28 */
>> +#define GPIO_HSUART_CTS_RTS_MODE_MASK BIT(6)
>> +#define GPIO_HSUART_MODE_MASK BIT(5)
>> +#define GPIO_SIPO_MODE_MASK BIT(2)
>> +#define GPIO_PON_MODE_MASK BIT(0)
>> +
>> +/* shared */
>> +#define REG_NPU_UART_EN 0x0224
>> +#define JTAG_UDI_EN_MASK BIT(4)
>> +#define JTAG_DFD_EN_MASK BIT(3)
>> +
>> +/* LED MAP - shared */
>> +#define REG_LAN_LED0_MAPPING 0x027c
>> +#define REG_LAN_LED1_MAPPING 0x0280
>> +
>> +#define LAN3_LED_MAPPING_MASK GENMASK(14, 12)
>> +#define LAN3_PHY_LED_MAP(_n)
>> FIELD_PREP_CONST(LAN3_LED_MAPPING_MASK, (_n)) +
>> +#define LAN2_LED_MAPPING_MASK GENMASK(10, 😎
>> +#define LAN2_PHY_LED_MAP(_n)
>> FIELD_PREP_CONST(LAN2_LED_MAPPING_MASK, (_n)) +
>> +#define LAN1_LED_MAPPING_MASK GENMASK(6, 4)
>> +#define LAN1_PHY_LED_MAP(_n)
>> FIELD_PREP_CONST(LAN1_LED_MAPPING_MASK, (_n)) +
>> +#define LAN0_LED_MAPPING_MASK GENMASK(2, 0)
>> +#define LAN0_PHY_LED_MAP(_n)
>> FIELD_PREP_CONST(LAN0_LED_MAPPING_MASK, (_n)) +
>> +/*
>> + * CONF - shared.
>> + * The AN7563 standalone IO conf registers use the same bit layout as
>> + * EN7581 (UART1_TXD/RXD are named UART_TXD/RXD on AN7563).
>> + */
>> +#define REG_I2C_SDA_E2 0x001c
>> +#define SPI_MISO_E2_MASK BIT(14)
>> +#define SPI_MOSI_E2_MASK BIT(13)
>> +#define SPI_CLK_E2_MASK BIT(12)
>> +#define SPI_CS0_E2_MASK BIT(11)
>> +#define PCIE1_RESET_E2_MASK BIT(9)
>> +#define PCIE0_RESET_E2_MASK BIT(8)
>> +#define UART1_RXD_E2_MASK BIT(3)
>> +#define UART1_TXD_E2_MASK BIT(2)
>> +#define I2C_SCL_E2_MASK BIT(1)
>> +#define I2C_SDA_E2_MASK BIT(0)
>> +
>> +#define REG_I2C_SDA_E4 0x0020
>> +#define SPI_MISO_E4_MASK BIT(14)
>> +#define SPI_MOSI_E4_MASK BIT(13)
>> +#define SPI_CLK_E4_MASK BIT(12)
>> +#define SPI_CS0_E4_MASK BIT(11)
>> +#define PCIE1_RESET_E4_MASK BIT(9)
>> +#define PCIE0_RESET_E4_MASK BIT(8)
>> +#define UART1_RXD_E4_MASK BIT(3)
>> +#define UART1_TXD_E4_MASK BIT(2)
>> +#define I2C_SCL_E4_MASK BIT(1)
>> +#define I2C_SDA_E4_MASK BIT(0)
>> +
>> +#define REG_GPIO_L_E2 0x0024
>> +#define REG_GPIO_L_E4 0x0028
>> +
>> +#define REG_I2C_SDA_PU 0x0044
>> +#define SPI_MISO_PU_MASK BIT(14)
>> +#define SPI_MOSI_PU_MASK BIT(13)
>> +#define SPI_CLK_PU_MASK BIT(12)
>> +#define SPI_CS0_PU_MASK BIT(11)
>> +#define PCIE1_RESET_PU_MASK BIT(9)
>> +#define PCIE0_RESET_PU_MASK BIT(8)
>> +#define UART1_RXD_PU_MASK BIT(3)
>> +#define UART1_TXD_PU_MASK BIT(2)
>> +#define I2C_SCL_PU_MASK BIT(1)
>> +#define I2C_SDA_PU_MASK BIT(0)
>> +
>> +#define REG_I2C_SDA_PD 0x0048
>> +#define SPI_MISO_PD_MASK BIT(14)
>> +#define SPI_MOSI_PD_MASK BIT(13)
>> +#define SPI_CLK_PD_MASK BIT(12)
>> +#define SPI_CS0_PD_MASK BIT(11)
>> +#define PCIE1_RESET_PD_MASK BIT(9)
>> +#define PCIE0_RESET_PD_MASK BIT(8)
>> +#define UART1_RXD_PD_MASK BIT(3)
>> +#define UART1_TXD_PD_MASK BIT(2)
>> +#define I2C_SCL_PD_MASK BIT(1)
>> +#define I2C_SDA_PD_MASK BIT(0)
>> +
>> +#define REG_GPIO_L_PU 0x004c
>> +#define REG_GPIO_L_PD 0x0050
>> +
>> +#define REG_PCIE_RESET_OD 0x018c
>> +#define PCIE1_RESET_OD_MASK BIT(1)
>> +#define PCIE0_RESET_OD_MASK BIT(0)
>> +
>> +/*
>> + * PWM MODE CONF - shared.
>> + * The AN7563 GPIO flash mode registers use the same layout as EN7581:
>> + * REG_GPIO_FLASH_MODE_CFG covers GPIO0-15, REG_GPIO_FLASH_MODE_CFG_EXT
>> + * covers GPIO16-31 (bits 0-15) and GPIO36+ (bits 16+). The SPI pads
>> + * (GPIO32-35) have no flash mode configuration bit.
>> + */
>> +#define REG_GPIO_FLASH_MODE_CFG 0x0034
>> +#define GPIO15_FLASH_MODE_CFG BIT(15)
>> +#define GPIO14_FLASH_MODE_CFG BIT(14)
>> +#define GPIO13_FLASH_MODE_CFG BIT(13)
>> +#define GPIO12_FLASH_MODE_CFG BIT(12)
>> +#define GPIO11_FLASH_MODE_CFG BIT(11)
>> +#define GPIO10_FLASH_MODE_CFG BIT(10)
>> +#define GPIO9_FLASH_MODE_CFG BIT(9)
>> +#define GPIO8_FLASH_MODE_CFG BIT(8)
>> +#define GPIO7_FLASH_MODE_CFG BIT(7)
>> +#define GPIO6_FLASH_MODE_CFG BIT(6)
>> +#define GPIO5_FLASH_MODE_CFG BIT(5)
>> +#define GPIO4_FLASH_MODE_CFG BIT(4)
>> +#define GPIO3_FLASH_MODE_CFG BIT(3)
>> +#define GPIO2_FLASH_MODE_CFG BIT(2)
>> +#define GPIO1_FLASH_MODE_CFG BIT(1)
>> +#define GPIO0_FLASH_MODE_CFG BIT(0)
>> +
>> +#define REG_GPIO_FLASH_MODE_CFG_EXT 0x0068
>> +#define GPIO37_FLASH_MODE_CFG BIT(17)
>> +#define GPIO36_FLASH_MODE_CFG BIT(16)
>> +#define GPIO31_FLASH_MODE_CFG BIT(15)
>> +#define GPIO30_FLASH_MODE_CFG BIT(14)
>> +#define GPIO29_FLASH_MODE_CFG BIT(13)
>> +#define GPIO28_FLASH_MODE_CFG BIT(12)
>> +#define GPIO27_FLASH_MODE_CFG BIT(11)
>> +#define GPIO26_FLASH_MODE_CFG BIT(10)
>> +#define GPIO25_FLASH_MODE_CFG BIT(9)
>> +#define GPIO24_FLASH_MODE_CFG BIT(8)
>> +#define GPIO23_FLASH_MODE_CFG BIT(7)
>> +#define GPIO22_FLASH_MODE_CFG BIT(6)
>> +#define GPIO21_FLASH_MODE_CFG BIT(5)
>> +#define GPIO20_FLASH_MODE_CFG BIT(4)
>> +#define GPIO19_FLASH_MODE_CFG BIT(3)
>> +#define GPIO18_FLASH_MODE_CFG BIT(2)
>> +#define GPIO17_FLASH_MODE_CFG BIT(1)
>> +#define GPIO16_FLASH_MODE_CFG BIT(0)
>> +
>> +#define AIROHA_PINCTRL_GPIO(gpio, mux_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_GPIO_PON_MODE, \
>> + (mux_val), \
>> + (mux_val) \
>> + }, \
>> + .regmap_size = 1, \
>> + }
>> +
>> +#define AIROHA_PINCTRL_GPIO_EXT(gpio, mux_val, smux_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_PWM_EXT_MUX, \
>> + REG_GPIO_FLASH_MODE_CFG_EXT, \
>> + (mux_val), \
>> + 0 \
>> + }, \
>> + .regmap[1] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_GPIO_PON_MODE, \
>> + (smux_val), \
>> + (smux_val) \
>> + }, \
>> + .regmap_size = 2, \
>> + }
>> +
>> +/* PWM */
>> +#define AIROHA_PINCTRL_PWM(gpio, mux_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_PWM_MUX, \
>> + REG_GPIO_FLASH_MODE_CFG, \
>> + (mux_val), \
>> + (mux_val) \
>> + }, \
>> + .regmap_size = 1, \
>> + }
>> +
>> +#define AIROHA_PINCTRL_PWM_EXT(gpio, mux_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_PWM_EXT_MUX, \
>> + REG_GPIO_FLASH_MODE_CFG_EXT, \
>> + (mux_val), \
>> + (mux_val) \
>> + }, \
>> + .regmap_size = 1, \
>> + }
>> +
>> +#define AIROHA_PINCTRL_PWM_EXT_SEC(gpio, mux_val, smux_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_PWM_EXT_MUX, \
>> + REG_GPIO_FLASH_MODE_CFG_EXT, \
>> + (mux_val), \
>> + (mux_val) \
>> + }, \
>> + .regmap[1] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_GPIO_PON_MODE, \
>> + (smux_val), \
>> + (smux_val) \
>> + }, \
>> + .regmap_size = 2, \
>> + }
>> +
>> +#define AIROHA_PINCTRL_PHY_LED0(gpio, mux_val, map_mask, map_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_GPIO_2ND_I2C_MODE, \
>> + (mux_val), \
>> + (mux_val), \
>> + }, \
>> + .regmap[1] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_LAN_LED0_MAPPING, \
>> + (map_mask), \
>> + (map_val), \
>> + }, \
>> + .regmap_size = 2, \
>> + }
>> +
>> +#define AIROHA_PINCTRL_PHY_LED1(gpio, mux_val, map_mask, map_val) \
>> + { \
>> + .name = (gpio), \
>> + .regmap[0] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_GPIO_2ND_I2C_MODE, \
>> + (mux_val), \
>> + (mux_val), \
>> + }, \
>> + .regmap[1] = { \
>> + AIROHA_FUNC_MUX, \
>> + REG_LAN_LED1_MAPPING, \
>> + (map_mask), \
>> + (map_val), \
>> + }, \
>> + .regmap_size = 2, \
>> + }
> These defines are similar to what we have in airoha-common.h, whatever is not
> the same add the define with the prefix and the defines that exist only have a
> different regmap, move to the add in the define parameter, do as was done in
> en7523
>
>
^ permalink raw reply
* Re: [PATCH v5 16/16] pinctrl: airoha: add support of an7563 SoC
From: Matheus Sampaio Queiroga @ 2026-06-22 11:55 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe, Mikhail Kshevetskiy
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-17-mikhail.kshevetskiy@iopsys.eu>
Em segunda-feira, 22 de junho de 2026, às 08:30:46 Horário Padrão de Brasília,
Mikhail Kshevetskiy escreveu:
> +/*
> + * shared - named RG_SW_TOD_1PPS_MODE on AN7563. Only the LAN LED mode
> + * bits and GSW_TOD_1PPS exist on AN7563 (no 2nd I2C, I2S or PON 1PPS).
> + */
> +#define REG_GPIO_2ND_I2C_MODE 0x0214
> +#define GPIO_LAN3_LED1_MODE_MASK BIT(10)
> +#define GPIO_LAN3_LED0_MODE_MASK BIT(9)
> +#define GPIO_LAN2_LED1_MODE_MASK BIT(8)
> +#define GPIO_LAN2_LED0_MODE_MASK BIT(7)
> +#define GPIO_LAN1_LED1_MODE_MASK BIT(6)
> +#define GPIO_LAN1_LED0_MODE_MASK BIT(5)
> +#define GPIO_LAN0_LED1_MODE_MASK BIT(4)
> +#define GPIO_LAN0_LED0_MODE_MASK BIT(3)
> +#define GSW_TOD_1PPS_MODE_MASK BIT(1)
> +
> +/* shared */
> +#define REG_GPIO_SPI_CS1_MODE 0x0218
> +#define GPIO_PCM_SPI_CS4_MODE_MASK BIT(21)
> +#define GPIO_PCM_SPI_CS3_MODE_MASK BIT(20)
> +#define GPIO_PCM_SPI_CS2_MODE_MASK BIT(18)
> +#define GPIO_PCM_SPI_CS1_MODE_MASK BIT(17)
> +#define GPIO_PCM_SPI_MODE_MASK BIT(16)
> +#define GPIO_PCM2_MODE_MASK BIT(13)
> +#define GPIO_PCM1_MODE_MASK BIT(12)
> +#define GPIO_PCM_INT_MODE_MASK BIT(9)
> +#define GPIO_PCM_RESET_MODE_MASK BIT(8)
> +#define GPIO_SPI_QUAD_MODE_MASK BIT(4)
> +#define GPIO_SPI_CS4_MODE_MASK BIT(3)
> +#define GPIO_SPI_CS3_MODE_MASK BIT(2)
> +#define GPIO_SPI_CS2_MODE_MASK BIT(1)
> +#define GPIO_SPI_CS1_MODE_MASK BIT(0)
> +
> +#define REG_GPIO_PON_MODE 0x021c
> +/*
> + * AN7563 specific: route the standalone pads to their GPIO function.
> + * 0: pad keeps its base function, 1: pad is GPIO<n>.
> + */
> +#define UART_RXD_GPIO_MODE_MASK BIT(22) /* GPIO37 */
> +#define UART_TXD_GPIO_MODE_MASK BIT(21) /* GPIO36
> */ +#define SPI_MISO_GPIO_MODE_MASK BIT(20) /*
> GPIO35 */ +#define SPI_MOSI_GPIO_MODE_MASK BIT(19)
> /* GPIO34 */ +#define SPI_CS_GPIO_MODE_MASK BIT(18) /*
> GPIO33 */ +#define SPI_CLK_GPIO_MODE_MASK BIT(17) /* GPIO32
> */ +#define I2C_SDA_GPIO_MODE_MASK BIT(16) /* GPIO31 */
> +#define I2C_SCL_GPIO_MODE_MASK BIT(15) /* GPIO30 */ +/*
> shared */
> +#define GPIO_PARALLEL_NAND_MODE_MASK BIT(14)
> +#define GPIO_SGMII_MDIO_MODE_MASK BIT(13)
> +#define SIPO_RCLK_MODE_MASK BIT(11)
> +/*
> + * Note: on AN7563 GPIO_PCIE_RESET{0,1} select the GPIO function of the
> + * PCIE_RESET pads (0: PCIe reset, 1: GPIO28/GPIO29).
> + */
> +#define GPIO_PCIE_RESET1_MASK BIT(10) /* GPIO29 */
> +#define GPIO_PCIE_RESET0_MASK BIT(9) /* GPIO28 */
> +#define GPIO_HSUART_CTS_RTS_MODE_MASK BIT(6)
> +#define GPIO_HSUART_MODE_MASK BIT(5)
> +#define GPIO_SIPO_MODE_MASK BIT(2)
> +#define GPIO_PON_MODE_MASK BIT(0)
> +
> +/* shared */
> +#define REG_NPU_UART_EN 0x0224
> +#define JTAG_UDI_EN_MASK BIT(4)
> +#define JTAG_DFD_EN_MASK BIT(3)
> +
> +/* LED MAP - shared */
> +#define REG_LAN_LED0_MAPPING 0x027c
> +#define REG_LAN_LED1_MAPPING 0x0280
> +
> +#define LAN3_LED_MAPPING_MASK GENMASK(14, 12)
> +#define LAN3_PHY_LED_MAP(_n)
> FIELD_PREP_CONST(LAN3_LED_MAPPING_MASK, (_n)) +
> +#define LAN2_LED_MAPPING_MASK GENMASK(10, 😎
> +#define LAN2_PHY_LED_MAP(_n)
> FIELD_PREP_CONST(LAN2_LED_MAPPING_MASK, (_n)) +
> +#define LAN1_LED_MAPPING_MASK GENMASK(6, 4)
> +#define LAN1_PHY_LED_MAP(_n)
> FIELD_PREP_CONST(LAN1_LED_MAPPING_MASK, (_n)) +
> +#define LAN0_LED_MAPPING_MASK GENMASK(2, 0)
> +#define LAN0_PHY_LED_MAP(_n)
> FIELD_PREP_CONST(LAN0_LED_MAPPING_MASK, (_n)) +
> +/*
> + * CONF - shared.
> + * The AN7563 standalone IO conf registers use the same bit layout as
> + * EN7581 (UART1_TXD/RXD are named UART_TXD/RXD on AN7563).
> + */
> +#define REG_I2C_SDA_E2 0x001c
> +#define SPI_MISO_E2_MASK BIT(14)
> +#define SPI_MOSI_E2_MASK BIT(13)
> +#define SPI_CLK_E2_MASK BIT(12)
> +#define SPI_CS0_E2_MASK BIT(11)
> +#define PCIE1_RESET_E2_MASK BIT(9)
> +#define PCIE0_RESET_E2_MASK BIT(8)
> +#define UART1_RXD_E2_MASK BIT(3)
> +#define UART1_TXD_E2_MASK BIT(2)
> +#define I2C_SCL_E2_MASK BIT(1)
> +#define I2C_SDA_E2_MASK BIT(0)
> +
> +#define REG_I2C_SDA_E4 0x0020
> +#define SPI_MISO_E4_MASK BIT(14)
> +#define SPI_MOSI_E4_MASK BIT(13)
> +#define SPI_CLK_E4_MASK BIT(12)
> +#define SPI_CS0_E4_MASK BIT(11)
> +#define PCIE1_RESET_E4_MASK BIT(9)
> +#define PCIE0_RESET_E4_MASK BIT(8)
> +#define UART1_RXD_E4_MASK BIT(3)
> +#define UART1_TXD_E4_MASK BIT(2)
> +#define I2C_SCL_E4_MASK BIT(1)
> +#define I2C_SDA_E4_MASK BIT(0)
> +
> +#define REG_GPIO_L_E2 0x0024
> +#define REG_GPIO_L_E4 0x0028
> +
> +#define REG_I2C_SDA_PU 0x0044
> +#define SPI_MISO_PU_MASK BIT(14)
> +#define SPI_MOSI_PU_MASK BIT(13)
> +#define SPI_CLK_PU_MASK BIT(12)
> +#define SPI_CS0_PU_MASK BIT(11)
> +#define PCIE1_RESET_PU_MASK BIT(9)
> +#define PCIE0_RESET_PU_MASK BIT(8)
> +#define UART1_RXD_PU_MASK BIT(3)
> +#define UART1_TXD_PU_MASK BIT(2)
> +#define I2C_SCL_PU_MASK BIT(1)
> +#define I2C_SDA_PU_MASK BIT(0)
> +
> +#define REG_I2C_SDA_PD 0x0048
> +#define SPI_MISO_PD_MASK BIT(14)
> +#define SPI_MOSI_PD_MASK BIT(13)
> +#define SPI_CLK_PD_MASK BIT(12)
> +#define SPI_CS0_PD_MASK BIT(11)
> +#define PCIE1_RESET_PD_MASK BIT(9)
> +#define PCIE0_RESET_PD_MASK BIT(8)
> +#define UART1_RXD_PD_MASK BIT(3)
> +#define UART1_TXD_PD_MASK BIT(2)
> +#define I2C_SCL_PD_MASK BIT(1)
> +#define I2C_SDA_PD_MASK BIT(0)
> +
> +#define REG_GPIO_L_PU 0x004c
> +#define REG_GPIO_L_PD 0x0050
> +
> +#define REG_PCIE_RESET_OD 0x018c
> +#define PCIE1_RESET_OD_MASK BIT(1)
> +#define PCIE0_RESET_OD_MASK BIT(0)
> +
> +/*
> + * PWM MODE CONF - shared.
> + * The AN7563 GPIO flash mode registers use the same layout as EN7581:
> + * REG_GPIO_FLASH_MODE_CFG covers GPIO0-15, REG_GPIO_FLASH_MODE_CFG_EXT
> + * covers GPIO16-31 (bits 0-15) and GPIO36+ (bits 16+). The SPI pads
> + * (GPIO32-35) have no flash mode configuration bit.
> + */
> +#define REG_GPIO_FLASH_MODE_CFG 0x0034
> +#define GPIO15_FLASH_MODE_CFG BIT(15)
> +#define GPIO14_FLASH_MODE_CFG BIT(14)
> +#define GPIO13_FLASH_MODE_CFG BIT(13)
> +#define GPIO12_FLASH_MODE_CFG BIT(12)
> +#define GPIO11_FLASH_MODE_CFG BIT(11)
> +#define GPIO10_FLASH_MODE_CFG BIT(10)
> +#define GPIO9_FLASH_MODE_CFG BIT(9)
> +#define GPIO8_FLASH_MODE_CFG BIT(8)
> +#define GPIO7_FLASH_MODE_CFG BIT(7)
> +#define GPIO6_FLASH_MODE_CFG BIT(6)
> +#define GPIO5_FLASH_MODE_CFG BIT(5)
> +#define GPIO4_FLASH_MODE_CFG BIT(4)
> +#define GPIO3_FLASH_MODE_CFG BIT(3)
> +#define GPIO2_FLASH_MODE_CFG BIT(2)
> +#define GPIO1_FLASH_MODE_CFG BIT(1)
> +#define GPIO0_FLASH_MODE_CFG BIT(0)
> +
> +#define REG_GPIO_FLASH_MODE_CFG_EXT 0x0068
> +#define GPIO37_FLASH_MODE_CFG BIT(17)
> +#define GPIO36_FLASH_MODE_CFG BIT(16)
> +#define GPIO31_FLASH_MODE_CFG BIT(15)
> +#define GPIO30_FLASH_MODE_CFG BIT(14)
> +#define GPIO29_FLASH_MODE_CFG BIT(13)
> +#define GPIO28_FLASH_MODE_CFG BIT(12)
> +#define GPIO27_FLASH_MODE_CFG BIT(11)
> +#define GPIO26_FLASH_MODE_CFG BIT(10)
> +#define GPIO25_FLASH_MODE_CFG BIT(9)
> +#define GPIO24_FLASH_MODE_CFG BIT(8)
> +#define GPIO23_FLASH_MODE_CFG BIT(7)
> +#define GPIO22_FLASH_MODE_CFG BIT(6)
> +#define GPIO21_FLASH_MODE_CFG BIT(5)
> +#define GPIO20_FLASH_MODE_CFG BIT(4)
> +#define GPIO19_FLASH_MODE_CFG BIT(3)
> +#define GPIO18_FLASH_MODE_CFG BIT(2)
> +#define GPIO17_FLASH_MODE_CFG BIT(1)
> +#define GPIO16_FLASH_MODE_CFG BIT(0)
> +
> +#define AIROHA_PINCTRL_GPIO(gpio, mux_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_MUX, \
> + REG_GPIO_PON_MODE, \
> + (mux_val), \
> + (mux_val) \
> + }, \
> + .regmap_size = 1, \
> + }
> +
> +#define AIROHA_PINCTRL_GPIO_EXT(gpio, mux_val, smux_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_PWM_EXT_MUX, \
> + REG_GPIO_FLASH_MODE_CFG_EXT, \
> + (mux_val), \
> + 0 \
> + }, \
> + .regmap[1] = { \
> + AIROHA_FUNC_MUX, \
> + REG_GPIO_PON_MODE, \
> + (smux_val), \
> + (smux_val) \
> + }, \
> + .regmap_size = 2, \
> + }
> +
> +/* PWM */
> +#define AIROHA_PINCTRL_PWM(gpio, mux_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_PWM_MUX, \
> + REG_GPIO_FLASH_MODE_CFG, \
> + (mux_val), \
> + (mux_val) \
> + }, \
> + .regmap_size = 1, \
> + }
> +
> +#define AIROHA_PINCTRL_PWM_EXT(gpio, mux_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_PWM_EXT_MUX, \
> + REG_GPIO_FLASH_MODE_CFG_EXT, \
> + (mux_val), \
> + (mux_val) \
> + }, \
> + .regmap_size = 1, \
> + }
> +
> +#define AIROHA_PINCTRL_PWM_EXT_SEC(gpio, mux_val, smux_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_PWM_EXT_MUX, \
> + REG_GPIO_FLASH_MODE_CFG_EXT, \
> + (mux_val), \
> + (mux_val) \
> + }, \
> + .regmap[1] = { \
> + AIROHA_FUNC_MUX, \
> + REG_GPIO_PON_MODE, \
> + (smux_val), \
> + (smux_val) \
> + }, \
> + .regmap_size = 2, \
> + }
> +
> +#define AIROHA_PINCTRL_PHY_LED0(gpio, mux_val, map_mask, map_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_MUX, \
> + REG_GPIO_2ND_I2C_MODE, \
> + (mux_val), \
> + (mux_val), \
> + }, \
> + .regmap[1] = { \
> + AIROHA_FUNC_MUX, \
> + REG_LAN_LED0_MAPPING, \
> + (map_mask), \
> + (map_val), \
> + }, \
> + .regmap_size = 2, \
> + }
> +
> +#define AIROHA_PINCTRL_PHY_LED1(gpio, mux_val, map_mask, map_val) \
> + { \
> + .name = (gpio), \
> + .regmap[0] = { \
> + AIROHA_FUNC_MUX, \
> + REG_GPIO_2ND_I2C_MODE, \
> + (mux_val), \
> + (mux_val), \
> + }, \
> + .regmap[1] = { \
> + AIROHA_FUNC_MUX, \
> + REG_LAN_LED1_MAPPING, \
> + (map_mask), \
> + (map_val), \
> + }, \
> + .regmap_size = 2, \
> + }
These defines are similar to what we have in airoha-common.h, whatever is not
the same add the define with the prefix and the defines that exist only have a
different regmap, move to the add in the define parameter, do as was done in
en7523
^ permalink raw reply
* [PATCH v5 16/16] pinctrl: airoha: add support of an7563 SoC
From: Mikhail Kshevetskiy @ 2026-06-22 11:30 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe,
Matheus Sampaio Queiroga
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-1-mikhail.kshevetskiy@iopsys.eu>
This patch adds support of Airoha an7563 SoC pin controller.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/pinctrl/airoha/Kconfig | 5 +
drivers/pinctrl/airoha/Makefile | 1 +
drivers/pinctrl/airoha/pinctrl-an7563.c | 1113 +++++++++++++++++++++++
3 files changed, 1119 insertions(+)
create mode 100644 drivers/pinctrl/airoha/pinctrl-an7563.c
diff --git a/drivers/pinctrl/airoha/Kconfig b/drivers/pinctrl/airoha/Kconfig
index 159b4496f64a..fd14e58136df 100644
--- a/drivers/pinctrl/airoha/Kconfig
+++ b/drivers/pinctrl/airoha/Kconfig
@@ -20,6 +20,11 @@ config PINCTRL_AIROHA
Say yes here to support pin controller and gpio driver
on Airoha SoC.
+config PINCTRL_AIROHA_AN7563
+ tristate "AN7563 pinctrl"
+ depends on ARM64 || COMPILE_TEST
+ depends on PINCTRL_AIROHA
+
config PINCTRL_AIROHA_AN7581
tristate "AN7581 pinctrl"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/pinctrl/airoha/Makefile b/drivers/pinctrl/airoha/Makefile
index 8b9202321ba8..30e4bee57a4a 100644
--- a/drivers/pinctrl/airoha/Makefile
+++ b/drivers/pinctrl/airoha/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_PINCTRL_AIROHA) += pinctrl-airoha.o
# SoC drivers
+obj-$(CONFIG_PINCTRL_AIROHA_AN7563) += pinctrl-an7563.o
obj-$(CONFIG_PINCTRL_AIROHA_AN7581) += pinctrl-an7581.o
obj-$(CONFIG_PINCTRL_AIROHA_AN7583) += pinctrl-an7583.o
obj-$(CONFIG_PINCTRL_AIROHA_EN7523) += pinctrl-en7523.o
diff --git a/drivers/pinctrl/airoha/pinctrl-an7563.c b/drivers/pinctrl/airoha/pinctrl-an7563.c
new file mode 100644
index 000000000000..cf343544400b
--- /dev/null
+++ b/drivers/pinctrl/airoha/pinctrl-an7563.c
@@ -0,0 +1,1113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AN7563 SoC pinctrl data for the Airoha pinctrl driver (pinctrl-airoha.c).
+ *
+ * Sources: AN7563 Programming Guide chapter 2 (CHIP SCU, base 0x1fa20000),
+ * chapter 17 (GPIO controller, base 0x1fbf0200) and AN7563PT datasheet
+ * chapter 4.3 (pin sharing scheme).
+ *
+ * Pin numbering follows the GPIO line numbering of the SoC:
+ * pins 0-27 -> GPIO0-GPIO27 (dedicated GPIO pads)
+ * pins 28/29 -> PCIE_RESET0/PCIE_RESET1 pads (GPIO28/GPIO29)
+ * pins 30/31 -> I2C_SCL/I2C_SDA pads (GPIO30/GPIO31)
+ * pins 32-35 -> SPI_CLK/SPI_CS/SPI_MOSI/SPI_MISO pads (GPIO32-GPIO35)
+ * pins 36/37 -> UART_TXD/UART_RXD pads (GPIO36/GPIO37)
+ *
+ * Definitions marked "shared" are identical to the ones already present in
+ * pinctrl-airoha.c (EN7581/AN7583) and must be dropped when this data is
+ * merged there.
+ */
+
+#include "airoha-common.h"
+
+/*
+ * shared - named RG_SW_TOD_1PPS_MODE on AN7563. Only the LAN LED mode
+ * bits and GSW_TOD_1PPS exist on AN7563 (no 2nd I2C, I2S or PON 1PPS).
+ */
+#define REG_GPIO_2ND_I2C_MODE 0x0214
+#define GPIO_LAN3_LED1_MODE_MASK BIT(10)
+#define GPIO_LAN3_LED0_MODE_MASK BIT(9)
+#define GPIO_LAN2_LED1_MODE_MASK BIT(8)
+#define GPIO_LAN2_LED0_MODE_MASK BIT(7)
+#define GPIO_LAN1_LED1_MODE_MASK BIT(6)
+#define GPIO_LAN1_LED0_MODE_MASK BIT(5)
+#define GPIO_LAN0_LED1_MODE_MASK BIT(4)
+#define GPIO_LAN0_LED0_MODE_MASK BIT(3)
+#define GSW_TOD_1PPS_MODE_MASK BIT(1)
+
+/* shared */
+#define REG_GPIO_SPI_CS1_MODE 0x0218
+#define GPIO_PCM_SPI_CS4_MODE_MASK BIT(21)
+#define GPIO_PCM_SPI_CS3_MODE_MASK BIT(20)
+#define GPIO_PCM_SPI_CS2_MODE_MASK BIT(18)
+#define GPIO_PCM_SPI_CS1_MODE_MASK BIT(17)
+#define GPIO_PCM_SPI_MODE_MASK BIT(16)
+#define GPIO_PCM2_MODE_MASK BIT(13)
+#define GPIO_PCM1_MODE_MASK BIT(12)
+#define GPIO_PCM_INT_MODE_MASK BIT(9)
+#define GPIO_PCM_RESET_MODE_MASK BIT(8)
+#define GPIO_SPI_QUAD_MODE_MASK BIT(4)
+#define GPIO_SPI_CS4_MODE_MASK BIT(3)
+#define GPIO_SPI_CS3_MODE_MASK BIT(2)
+#define GPIO_SPI_CS2_MODE_MASK BIT(1)
+#define GPIO_SPI_CS1_MODE_MASK BIT(0)
+
+#define REG_GPIO_PON_MODE 0x021c
+/*
+ * AN7563 specific: route the standalone pads to their GPIO function.
+ * 0: pad keeps its base function, 1: pad is GPIO<n>.
+ */
+#define UART_RXD_GPIO_MODE_MASK BIT(22) /* GPIO37 */
+#define UART_TXD_GPIO_MODE_MASK BIT(21) /* GPIO36 */
+#define SPI_MISO_GPIO_MODE_MASK BIT(20) /* GPIO35 */
+#define SPI_MOSI_GPIO_MODE_MASK BIT(19) /* GPIO34 */
+#define SPI_CS_GPIO_MODE_MASK BIT(18) /* GPIO33 */
+#define SPI_CLK_GPIO_MODE_MASK BIT(17) /* GPIO32 */
+#define I2C_SDA_GPIO_MODE_MASK BIT(16) /* GPIO31 */
+#define I2C_SCL_GPIO_MODE_MASK BIT(15) /* GPIO30 */
+/* shared */
+#define GPIO_PARALLEL_NAND_MODE_MASK BIT(14)
+#define GPIO_SGMII_MDIO_MODE_MASK BIT(13)
+#define SIPO_RCLK_MODE_MASK BIT(11)
+/*
+ * Note: on AN7563 GPIO_PCIE_RESET{0,1} select the GPIO function of the
+ * PCIE_RESET pads (0: PCIe reset, 1: GPIO28/GPIO29).
+ */
+#define GPIO_PCIE_RESET1_MASK BIT(10) /* GPIO29 */
+#define GPIO_PCIE_RESET0_MASK BIT(9) /* GPIO28 */
+#define GPIO_HSUART_CTS_RTS_MODE_MASK BIT(6)
+#define GPIO_HSUART_MODE_MASK BIT(5)
+#define GPIO_SIPO_MODE_MASK BIT(2)
+#define GPIO_PON_MODE_MASK BIT(0)
+
+/* shared */
+#define REG_NPU_UART_EN 0x0224
+#define JTAG_UDI_EN_MASK BIT(4)
+#define JTAG_DFD_EN_MASK BIT(3)
+
+/* LED MAP - shared */
+#define REG_LAN_LED0_MAPPING 0x027c
+#define REG_LAN_LED1_MAPPING 0x0280
+
+#define LAN3_LED_MAPPING_MASK GENMASK(14, 12)
+#define LAN3_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN3_LED_MAPPING_MASK, (_n))
+
+#define LAN2_LED_MAPPING_MASK GENMASK(10, 8)
+#define LAN2_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN2_LED_MAPPING_MASK, (_n))
+
+#define LAN1_LED_MAPPING_MASK GENMASK(6, 4)
+#define LAN1_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN1_LED_MAPPING_MASK, (_n))
+
+#define LAN0_LED_MAPPING_MASK GENMASK(2, 0)
+#define LAN0_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN0_LED_MAPPING_MASK, (_n))
+
+/*
+ * CONF - shared.
+ * The AN7563 standalone IO conf registers use the same bit layout as
+ * EN7581 (UART1_TXD/RXD are named UART_TXD/RXD on AN7563).
+ */
+#define REG_I2C_SDA_E2 0x001c
+#define SPI_MISO_E2_MASK BIT(14)
+#define SPI_MOSI_E2_MASK BIT(13)
+#define SPI_CLK_E2_MASK BIT(12)
+#define SPI_CS0_E2_MASK BIT(11)
+#define PCIE1_RESET_E2_MASK BIT(9)
+#define PCIE0_RESET_E2_MASK BIT(8)
+#define UART1_RXD_E2_MASK BIT(3)
+#define UART1_TXD_E2_MASK BIT(2)
+#define I2C_SCL_E2_MASK BIT(1)
+#define I2C_SDA_E2_MASK BIT(0)
+
+#define REG_I2C_SDA_E4 0x0020
+#define SPI_MISO_E4_MASK BIT(14)
+#define SPI_MOSI_E4_MASK BIT(13)
+#define SPI_CLK_E4_MASK BIT(12)
+#define SPI_CS0_E4_MASK BIT(11)
+#define PCIE1_RESET_E4_MASK BIT(9)
+#define PCIE0_RESET_E4_MASK BIT(8)
+#define UART1_RXD_E4_MASK BIT(3)
+#define UART1_TXD_E4_MASK BIT(2)
+#define I2C_SCL_E4_MASK BIT(1)
+#define I2C_SDA_E4_MASK BIT(0)
+
+#define REG_GPIO_L_E2 0x0024
+#define REG_GPIO_L_E4 0x0028
+
+#define REG_I2C_SDA_PU 0x0044
+#define SPI_MISO_PU_MASK BIT(14)
+#define SPI_MOSI_PU_MASK BIT(13)
+#define SPI_CLK_PU_MASK BIT(12)
+#define SPI_CS0_PU_MASK BIT(11)
+#define PCIE1_RESET_PU_MASK BIT(9)
+#define PCIE0_RESET_PU_MASK BIT(8)
+#define UART1_RXD_PU_MASK BIT(3)
+#define UART1_TXD_PU_MASK BIT(2)
+#define I2C_SCL_PU_MASK BIT(1)
+#define I2C_SDA_PU_MASK BIT(0)
+
+#define REG_I2C_SDA_PD 0x0048
+#define SPI_MISO_PD_MASK BIT(14)
+#define SPI_MOSI_PD_MASK BIT(13)
+#define SPI_CLK_PD_MASK BIT(12)
+#define SPI_CS0_PD_MASK BIT(11)
+#define PCIE1_RESET_PD_MASK BIT(9)
+#define PCIE0_RESET_PD_MASK BIT(8)
+#define UART1_RXD_PD_MASK BIT(3)
+#define UART1_TXD_PD_MASK BIT(2)
+#define I2C_SCL_PD_MASK BIT(1)
+#define I2C_SDA_PD_MASK BIT(0)
+
+#define REG_GPIO_L_PU 0x004c
+#define REG_GPIO_L_PD 0x0050
+
+#define REG_PCIE_RESET_OD 0x018c
+#define PCIE1_RESET_OD_MASK BIT(1)
+#define PCIE0_RESET_OD_MASK BIT(0)
+
+/*
+ * PWM MODE CONF - shared.
+ * The AN7563 GPIO flash mode registers use the same layout as EN7581:
+ * REG_GPIO_FLASH_MODE_CFG covers GPIO0-15, REG_GPIO_FLASH_MODE_CFG_EXT
+ * covers GPIO16-31 (bits 0-15) and GPIO36+ (bits 16+). The SPI pads
+ * (GPIO32-35) have no flash mode configuration bit.
+ */
+#define REG_GPIO_FLASH_MODE_CFG 0x0034
+#define GPIO15_FLASH_MODE_CFG BIT(15)
+#define GPIO14_FLASH_MODE_CFG BIT(14)
+#define GPIO13_FLASH_MODE_CFG BIT(13)
+#define GPIO12_FLASH_MODE_CFG BIT(12)
+#define GPIO11_FLASH_MODE_CFG BIT(11)
+#define GPIO10_FLASH_MODE_CFG BIT(10)
+#define GPIO9_FLASH_MODE_CFG BIT(9)
+#define GPIO8_FLASH_MODE_CFG BIT(8)
+#define GPIO7_FLASH_MODE_CFG BIT(7)
+#define GPIO6_FLASH_MODE_CFG BIT(6)
+#define GPIO5_FLASH_MODE_CFG BIT(5)
+#define GPIO4_FLASH_MODE_CFG BIT(4)
+#define GPIO3_FLASH_MODE_CFG BIT(3)
+#define GPIO2_FLASH_MODE_CFG BIT(2)
+#define GPIO1_FLASH_MODE_CFG BIT(1)
+#define GPIO0_FLASH_MODE_CFG BIT(0)
+
+#define REG_GPIO_FLASH_MODE_CFG_EXT 0x0068
+#define GPIO37_FLASH_MODE_CFG BIT(17)
+#define GPIO36_FLASH_MODE_CFG BIT(16)
+#define GPIO31_FLASH_MODE_CFG BIT(15)
+#define GPIO30_FLASH_MODE_CFG BIT(14)
+#define GPIO29_FLASH_MODE_CFG BIT(13)
+#define GPIO28_FLASH_MODE_CFG BIT(12)
+#define GPIO27_FLASH_MODE_CFG BIT(11)
+#define GPIO26_FLASH_MODE_CFG BIT(10)
+#define GPIO25_FLASH_MODE_CFG BIT(9)
+#define GPIO24_FLASH_MODE_CFG BIT(8)
+#define GPIO23_FLASH_MODE_CFG BIT(7)
+#define GPIO22_FLASH_MODE_CFG BIT(6)
+#define GPIO21_FLASH_MODE_CFG BIT(5)
+#define GPIO20_FLASH_MODE_CFG BIT(4)
+#define GPIO19_FLASH_MODE_CFG BIT(3)
+#define GPIO18_FLASH_MODE_CFG BIT(2)
+#define GPIO17_FLASH_MODE_CFG BIT(1)
+#define GPIO16_FLASH_MODE_CFG BIT(0)
+
+#define AIROHA_PINCTRL_GPIO(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_GPIO_EXT(gpio, mux_val, smux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ 0 \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (smux_val), \
+ (smux_val) \
+ }, \
+ .regmap_size = 2, \
+ }
+
+/* PWM */
+#define AIROHA_PINCTRL_PWM(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_MUX, \
+ REG_GPIO_FLASH_MODE_CFG, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_PWM_EXT(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_PWM_EXT_SEC(gpio, mux_val, smux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (smux_val), \
+ (smux_val) \
+ }, \
+ .regmap_size = 2, \
+ }
+
+#define AIROHA_PINCTRL_PHY_LED0(gpio, mux_val, map_mask, map_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_2ND_I2C_MODE, \
+ (mux_val), \
+ (mux_val), \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_LAN_LED0_MAPPING, \
+ (map_mask), \
+ (map_val), \
+ }, \
+ .regmap_size = 2, \
+ }
+
+#define AIROHA_PINCTRL_PHY_LED1(gpio, mux_val, map_mask, map_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_2ND_I2C_MODE, \
+ (mux_val), \
+ (mux_val), \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_LAN_LED1_MAPPING, \
+ (map_mask), \
+ (map_val), \
+ }, \
+ .regmap_size = 2, \
+ }
+
+static const struct pinctrl_pin_desc pinctrl_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "gpio16"),
+ PINCTRL_PIN(17, "gpio17"),
+ PINCTRL_PIN(18, "gpio18"),
+ PINCTRL_PIN(19, "gpio19"),
+ PINCTRL_PIN(20, "gpio20"),
+ PINCTRL_PIN(21, "gpio21"),
+ PINCTRL_PIN(22, "gpio22"),
+ PINCTRL_PIN(23, "gpio23"),
+ PINCTRL_PIN(24, "gpio24"),
+ PINCTRL_PIN(25, "gpio25"),
+ PINCTRL_PIN(26, "gpio26"),
+ PINCTRL_PIN(27, "gpio27"),
+ PINCTRL_PIN(28, "pcie_reset0"), /* GPIO28 */
+ PINCTRL_PIN(29, "pcie_reset1"), /* GPIO29 */
+ PINCTRL_PIN(30, "i2c_scl"), /* GPIO30 */
+ PINCTRL_PIN(31, "i2c_sda"), /* GPIO31 */
+ PINCTRL_PIN(32, "spi_clk"), /* GPIO32 */
+ PINCTRL_PIN(33, "spi_cs"), /* GPIO33 */
+ PINCTRL_PIN(34, "spi_mosi"), /* GPIO34 */
+ PINCTRL_PIN(35, "spi_miso"), /* GPIO35 */
+ PINCTRL_PIN(36, "uart_txd"), /* GPIO36 */
+ PINCTRL_PIN(37, "uart_rxd"), /* GPIO37 */
+};
+
+static const int pon_pins[] = { 14, 15, 16, 17, 18, 19 };
+static const int sipo_pins[] = { 20, 21 };
+static const int sipo_rclk_pins[] = { 20, 21, 26 };
+static const int mdio_pins[] = { 30, 31 };
+static const int hsuart_pins[] = { 16, 17 };
+static const int hsuart_cts_rts_pins[] = { 14, 15 };
+static const int i2c_pins[] = { 30, 31 };
+static const int jtag_udi_pins[] = { 7, 8, 9, 10, 11 };
+static const int jtag_dfd_pins[] = { 7, 8, 9, 10, 11 };
+static const int pcm1_pins[] = { 22, 23, 24, 25 };
+static const int pcm2_pins[] = { 1, 2, 3, 4 };
+static const int spi_pins[] = { 32, 33, 34, 35 };
+static const int spi_quad_pins[] = { 2, 3 };
+static const int spi_cs1_pins[] = { 4 };
+static const int pnand_pins[] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 27, 32, 33, 34, 35
+};
+static const int gpio0_pins[] = { 0 };
+static const int gpio1_pins[] = { 1 };
+static const int gpio2_pins[] = { 2 };
+static const int gpio3_pins[] = { 3 };
+static const int gpio4_pins[] = { 4 };
+static const int gpio5_pins[] = { 5 };
+static const int gpio6_pins[] = { 6 };
+static const int gpio7_pins[] = { 7 };
+static const int gpio8_pins[] = { 8 };
+static const int gpio9_pins[] = { 9 };
+static const int gpio10_pins[] = { 10 };
+static const int gpio11_pins[] = { 11 };
+static const int gpio12_pins[] = { 12 };
+static const int gpio13_pins[] = { 13 };
+static const int gpio14_pins[] = { 14 };
+static const int gpio15_pins[] = { 15 };
+static const int gpio16_pins[] = { 16 };
+static const int gpio17_pins[] = { 17 };
+static const int gpio18_pins[] = { 18 };
+static const int gpio19_pins[] = { 19 };
+static const int gpio20_pins[] = { 20 };
+static const int gpio21_pins[] = { 21 };
+static const int gpio22_pins[] = { 22 };
+static const int gpio23_pins[] = { 23 };
+static const int gpio24_pins[] = { 24 };
+static const int gpio25_pins[] = { 25 };
+static const int gpio26_pins[] = { 26 };
+static const int gpio27_pins[] = { 27 };
+static const int gpio28_pins[] = { 28 };
+static const int gpio29_pins[] = { 29 };
+static const int gpio30_pins[] = { 30 };
+static const int gpio31_pins[] = { 31 };
+static const int gpio32_pins[] = { 32 };
+static const int gpio33_pins[] = { 33 };
+static const int gpio34_pins[] = { 34 };
+static const int gpio35_pins[] = { 35 };
+static const int gpio36_pins[] = { 36 };
+static const int gpio37_pins[] = { 37 };
+static const int pcie_reset0_pins[] = { 28 };
+static const int pcie_reset1_pins[] = { 29 };
+
+static const struct pingroup pinctrl_groups[] = {
+ PINCTRL_PIN_GROUP("pon", pon),
+ PINCTRL_PIN_GROUP("sipo", sipo),
+ PINCTRL_PIN_GROUP("sipo_rclk", sipo_rclk),
+ PINCTRL_PIN_GROUP("mdio", mdio),
+ PINCTRL_PIN_GROUP("hsuart", hsuart),
+ PINCTRL_PIN_GROUP("hsuart_cts_rts", hsuart_cts_rts),
+ PINCTRL_PIN_GROUP("i2c", i2c),
+ PINCTRL_PIN_GROUP("jtag_udi", jtag_udi),
+ PINCTRL_PIN_GROUP("jtag_dfd", jtag_dfd),
+ PINCTRL_PIN_GROUP("pcm1", pcm1),
+ PINCTRL_PIN_GROUP("pcm2", pcm2),
+ PINCTRL_PIN_GROUP("spi", spi),
+ PINCTRL_PIN_GROUP("spi_quad", spi_quad),
+ PINCTRL_PIN_GROUP("spi_cs1", spi_cs1),
+ PINCTRL_PIN_GROUP("pnand", pnand),
+ PINCTRL_PIN_GROUP("gpio0", gpio0),
+ PINCTRL_PIN_GROUP("gpio1", gpio1),
+ PINCTRL_PIN_GROUP("gpio2", gpio2),
+ PINCTRL_PIN_GROUP("gpio3", gpio3),
+ PINCTRL_PIN_GROUP("gpio4", gpio4),
+ PINCTRL_PIN_GROUP("gpio5", gpio5),
+ PINCTRL_PIN_GROUP("gpio6", gpio6),
+ PINCTRL_PIN_GROUP("gpio7", gpio7),
+ PINCTRL_PIN_GROUP("gpio8", gpio8),
+ PINCTRL_PIN_GROUP("gpio9", gpio9),
+ PINCTRL_PIN_GROUP("gpio10", gpio10),
+ PINCTRL_PIN_GROUP("gpio11", gpio11),
+ PINCTRL_PIN_GROUP("gpio12", gpio12),
+ PINCTRL_PIN_GROUP("gpio13", gpio13),
+ PINCTRL_PIN_GROUP("gpio14", gpio14),
+ PINCTRL_PIN_GROUP("gpio15", gpio15),
+ PINCTRL_PIN_GROUP("gpio16", gpio16),
+ PINCTRL_PIN_GROUP("gpio17", gpio17),
+ PINCTRL_PIN_GROUP("gpio18", gpio18),
+ PINCTRL_PIN_GROUP("gpio19", gpio19),
+ PINCTRL_PIN_GROUP("gpio20", gpio20),
+ PINCTRL_PIN_GROUP("gpio21", gpio21),
+ PINCTRL_PIN_GROUP("gpio22", gpio22),
+ PINCTRL_PIN_GROUP("gpio23", gpio23),
+ PINCTRL_PIN_GROUP("gpio24", gpio24),
+ PINCTRL_PIN_GROUP("gpio25", gpio25),
+ PINCTRL_PIN_GROUP("gpio26", gpio26),
+ PINCTRL_PIN_GROUP("gpio27", gpio27),
+ PINCTRL_PIN_GROUP("gpio28", gpio28),
+ PINCTRL_PIN_GROUP("gpio29", gpio29),
+ PINCTRL_PIN_GROUP("gpio30", gpio30),
+ PINCTRL_PIN_GROUP("gpio31", gpio31),
+ PINCTRL_PIN_GROUP("gpio32", gpio32),
+ PINCTRL_PIN_GROUP("gpio33", gpio33),
+ PINCTRL_PIN_GROUP("gpio34", gpio34),
+ PINCTRL_PIN_GROUP("gpio35", gpio35),
+ PINCTRL_PIN_GROUP("gpio36", gpio36),
+ PINCTRL_PIN_GROUP("gpio37", gpio37),
+ PINCTRL_PIN_GROUP("pcie_reset0", pcie_reset0),
+ PINCTRL_PIN_GROUP("pcie_reset1", pcie_reset1),
+};
+
+/* shared */
+static const char *const pon_groups[] = { "pon" };
+static const char *const sipo_groups[] = { "sipo", "sipo_rclk" };
+static const char *const mdio_groups[] = { "mdio" };
+static const char *const uart_groups[] = {
+ "hsuart", "hsuart_cts_rts"
+};
+static const char *const jtag_groups[] = { "jtag_udi", "jtag_dfd" };
+static const char *const pcm_groups[] = { "pcm1", "pcm2" };
+static const char *const spi_groups[] = { "spi_quad", "spi_cs1" };
+static const char *const pnand_groups[] = { "pnand" };
+static const char *const gpio_groups[] = {
+ "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio33", "gpio34", "gpio35", "gpio36", "gpio37"
+};
+static const char *const pcie_reset_groups[] = {
+ "pcie_reset0", "pcie_reset1"
+};
+static const char *const pwm_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17",
+ "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio36", "gpio37"
+};
+static const char *const phy1_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy2_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy3_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy4_led0_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+static const char *const phy1_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char *const phy2_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char *const phy3_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+static const char *const phy4_led1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group pon_func_group[] = {
+ {
+ .name = "pon",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PON_MODE_MASK,
+ GPIO_PON_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group sipo_func_group[] = {
+ {
+ .name = "sipo",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK,
+ GPIO_SIPO_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "sipo_rclk",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/*
+ * On AN7563 the SMI master (MDC/MDIO) is shared with the I2C_SCL/I2C_SDA
+ * pads and selected via the SGMII MDIO mode bit. I2C is the default pad
+ * function (no mux bit).
+ */
+static const struct airoha_pinctrl_func_group mdio_func_group[] = {
+ {
+ .name = "mdio",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SGMII_MDIO_MODE_MASK,
+ GPIO_SGMII_MDIO_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group uart_func_group[] = {
+ {
+ .name = "hsuart",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_HSUART_MODE_MASK | GPIO_HSUART_CTS_RTS_MODE_MASK,
+ GPIO_HSUART_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+ {
+ .name = "hsuart_cts_rts",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_HSUART_MODE_MASK | GPIO_HSUART_CTS_RTS_MODE_MASK,
+ GPIO_HSUART_MODE_MASK | GPIO_HSUART_CTS_RTS_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group jtag_func_group[] = {
+ {
+ .name = "jtag_udi",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ JTAG_UDI_EN_MASK,
+ JTAG_UDI_EN_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "jtag_dfd",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ JTAG_DFD_EN_MASK,
+ JTAG_DFD_EN_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group pcm_func_group[] = {
+ {
+ .name = "pcm1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM1_MODE_MASK,
+ GPIO_PCM1_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm2",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM2_MODE_MASK,
+ GPIO_PCM2_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group spi_func_group[] = {
+ {
+ .name = "spi_quad",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_SPI_QUAD_MODE_MASK,
+ GPIO_SPI_QUAD_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "spi_cs1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_SPI_CS1_MODE_MASK,
+ GPIO_SPI_CS1_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+/* shared */
+static const struct airoha_pinctrl_func_group pnand_func_group[] = {
+ {
+ .name = "pnand",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PARALLEL_NAND_MODE_MASK,
+ GPIO_PARALLEL_NAND_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group gpio_func_group[] = {
+ AIROHA_PINCTRL_GPIO_EXT("gpio28", GPIO28_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET0_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio29", GPIO29_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET1_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio30", GPIO30_FLASH_MODE_CFG,
+ I2C_SCL_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio31", GPIO31_FLASH_MODE_CFG,
+ I2C_SDA_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio32", SPI_CLK_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio33", SPI_CS_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio34", SPI_MOSI_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO("gpio35", SPI_MISO_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio36", GPIO36_FLASH_MODE_CFG,
+ UART_TXD_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio37", GPIO37_FLASH_MODE_CFG,
+ UART_RXD_GPIO_MODE_MASK),
+};
+
+/*
+ * On AN7563 a set GPIO_PCIE_RESET{0,1} bit routes the pad to its GPIO
+ * function, so the PCIe reset function must clear it.
+ */
+static const struct airoha_pinctrl_func_group pcie_reset_func_group[] = {
+ {
+ .name = "pcie_reset0",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PCIE_RESET0_MASK,
+ 0
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcie_reset1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PCIE_RESET1_MASK,
+ 0
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group pwm_func_group[] = {
+ AIROHA_PINCTRL_PWM("gpio0", GPIO0_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio1", GPIO1_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio2", GPIO2_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio3", GPIO3_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio4", GPIO4_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio5", GPIO5_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio6", GPIO6_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio7", GPIO7_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio8", GPIO8_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio9", GPIO9_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio10", GPIO10_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio11", GPIO11_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio12", GPIO12_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio13", GPIO13_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio14", GPIO14_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio15", GPIO15_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio16", GPIO16_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio17", GPIO17_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio18", GPIO18_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio19", GPIO19_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio20", GPIO20_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio21", GPIO21_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio22", GPIO22_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio23", GPIO23_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio24", GPIO24_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio25", GPIO25_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio26", GPIO26_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio27", GPIO27_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio28", GPIO28_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET0_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio29", GPIO29_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET1_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio30", GPIO30_FLASH_MODE_CFG,
+ I2C_SCL_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio31", GPIO31_FLASH_MODE_CFG,
+ I2C_SDA_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio36", GPIO36_FLASH_MODE_CFG,
+ UART_TXD_GPIO_MODE_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio37", GPIO37_FLASH_MODE_CFG,
+ UART_RXD_GPIO_MODE_MASK),
+};
+
+/*
+ * LED pad mapping (datasheet table 4-9):
+ * GPIO8: LAN0_LED0, GPIO9: LAN1_LED0, GPIO10: LAN2_LED0, GPIO11: LAN3_LED0
+ * GPIO7: LAN0_LED1, GPIO6: LAN1_LED1, GPIO5: LAN2_LED1, GPIO4: LAN3_LED1
+ */
+static const struct airoha_pinctrl_func_group phy1_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(0)),
+};
+
+static const struct airoha_pinctrl_func_group phy2_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(1)),
+};
+
+static const struct airoha_pinctrl_func_group phy3_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(2)),
+};
+
+static const struct airoha_pinctrl_func_group phy4_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio8", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio9", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio10", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio11", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
+};
+
+static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(0)),
+};
+
+static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(1)),
+};
+
+static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(2)),
+};
+
+static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(3)),
+};
+
+static const struct airoha_pinctrl_func pinctrl_funcs[] = {
+ PINCTRL_FUNC_DESC("pon", pon),
+ PINCTRL_FUNC_DESC("sipo", sipo),
+ PINCTRL_FUNC_DESC("mdio", mdio),
+ PINCTRL_FUNC_DESC("uart", uart),
+ PINCTRL_FUNC_DESC("jtag", jtag),
+ PINCTRL_FUNC_DESC("pcm", pcm),
+ PINCTRL_FUNC_DESC("spi", spi),
+ PINCTRL_FUNC_DESC("pnand", pnand),
+ PINCTRL_FUNC_DESC("gpio", gpio),
+ PINCTRL_FUNC_DESC("pcie_reset", pcie_reset),
+ PINCTRL_FUNC_DESC("pwm", pwm),
+ PINCTRL_FUNC_DESC("phy1_led0", phy1_led0),
+ PINCTRL_FUNC_DESC("phy2_led0", phy2_led0),
+ PINCTRL_FUNC_DESC("phy3_led0", phy3_led0),
+ PINCTRL_FUNC_DESC("phy4_led0", phy4_led0),
+ PINCTRL_FUNC_DESC("phy1_led1", phy1_led1),
+ PINCTRL_FUNC_DESC("phy2_led1", phy2_led1),
+ PINCTRL_FUNC_DESC("phy3_led1", phy3_led1),
+ PINCTRL_FUNC_DESC("phy4_led1", phy4_led1),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pullup_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_PU, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_PU, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_PU, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_PU, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_PU, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_PU, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_PU, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_PU, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_PU, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_PU, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_PU, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_PU, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_PU, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_PU, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_PU, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_PU, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_PU, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_PU, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_PU, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_PU, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_PU, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_PU, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_PU, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_PU, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_PU, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_PU, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_PU, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_PU, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_PU, PCIE0_RESET_PU_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_PU, PCIE1_RESET_PU_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_PU, I2C_SCL_PU_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_PU, I2C_SDA_PU_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_PU, SPI_CLK_PU_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_PU, SPI_CS0_PU_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_PU, SPI_MOSI_PU_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_PU, SPI_MISO_PU_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_PU, UART1_TXD_PU_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_PU, UART1_RXD_PU_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pulldown_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_PD, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_PD, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_PD, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_PD, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_PD, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_PD, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_PD, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_PD, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_PD, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_PD, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_PD, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_PD, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_PD, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_PD, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_PD, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_PD, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_PD, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_PD, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_PD, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_PD, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_PD, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_PD, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_PD, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_PD, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_PD, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_PD, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_PD, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_PD, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_PD, PCIE0_RESET_PD_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_PD, PCIE1_RESET_PD_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_PD, I2C_SCL_PD_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_PD, I2C_SDA_PD_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_PD, SPI_CLK_PD_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_PD, SPI_CS0_PD_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_PD, SPI_MOSI_PD_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_PD, SPI_MISO_PD_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_PD, UART1_TXD_PD_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_PD, UART1_RXD_PD_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_drive_e2_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_E2, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_E2, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_E2, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_E2, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_E2, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_E2, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_E2, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_E2, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_E2, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_E2, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_E2, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_E2, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_E2, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_E2, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_E2, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_E2, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_E2, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_E2, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_E2, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_E2, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_E2, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_E2, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_E2, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_E2, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_E2, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_E2, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_E2, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_E2, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_E2, PCIE0_RESET_E2_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_E2, PCIE1_RESET_E2_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_E2, I2C_SCL_E2_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_E2, I2C_SDA_E2_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_E2, SPI_CLK_E2_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_E2, SPI_CS0_E2_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_E2, SPI_MOSI_E2_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_E2, SPI_MISO_E2_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_E2, UART1_TXD_E2_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_E2, UART1_RXD_E2_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_drive_e4_conf[] = {
+ PINCTRL_CONF_DESC(0, REG_GPIO_L_E4, BIT(0)),
+ PINCTRL_CONF_DESC(1, REG_GPIO_L_E4, BIT(1)),
+ PINCTRL_CONF_DESC(2, REG_GPIO_L_E4, BIT(2)),
+ PINCTRL_CONF_DESC(3, REG_GPIO_L_E4, BIT(3)),
+ PINCTRL_CONF_DESC(4, REG_GPIO_L_E4, BIT(4)),
+ PINCTRL_CONF_DESC(5, REG_GPIO_L_E4, BIT(5)),
+ PINCTRL_CONF_DESC(6, REG_GPIO_L_E4, BIT(6)),
+ PINCTRL_CONF_DESC(7, REG_GPIO_L_E4, BIT(7)),
+ PINCTRL_CONF_DESC(8, REG_GPIO_L_E4, BIT(8)),
+ PINCTRL_CONF_DESC(9, REG_GPIO_L_E4, BIT(9)),
+ PINCTRL_CONF_DESC(10, REG_GPIO_L_E4, BIT(10)),
+ PINCTRL_CONF_DESC(11, REG_GPIO_L_E4, BIT(11)),
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_E4, BIT(12)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_E4, BIT(13)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_E4, BIT(14)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_E4, BIT(15)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_E4, BIT(16)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_E4, BIT(17)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_E4, BIT(18)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_E4, BIT(19)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_E4, BIT(20)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_E4, BIT(21)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_E4, BIT(22)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_E4, BIT(23)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_E4, BIT(24)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_E4, BIT(25)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_E4, BIT(26)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_E4, BIT(27)),
+ PINCTRL_CONF_DESC(28, REG_I2C_SDA_E4, PCIE0_RESET_E4_MASK),
+ PINCTRL_CONF_DESC(29, REG_I2C_SDA_E4, PCIE1_RESET_E4_MASK),
+ PINCTRL_CONF_DESC(30, REG_I2C_SDA_E4, I2C_SCL_E4_MASK),
+ PINCTRL_CONF_DESC(31, REG_I2C_SDA_E4, I2C_SDA_E4_MASK),
+ PINCTRL_CONF_DESC(32, REG_I2C_SDA_E4, SPI_CLK_E4_MASK),
+ PINCTRL_CONF_DESC(33, REG_I2C_SDA_E4, SPI_CS0_E4_MASK),
+ PINCTRL_CONF_DESC(34, REG_I2C_SDA_E4, SPI_MOSI_E4_MASK),
+ PINCTRL_CONF_DESC(35, REG_I2C_SDA_E4, SPI_MISO_E4_MASK),
+ PINCTRL_CONF_DESC(36, REG_I2C_SDA_E4, UART1_TXD_E4_MASK),
+ PINCTRL_CONF_DESC(37, REG_I2C_SDA_E4, UART1_RXD_E4_MASK),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pcie_rst_od_conf[] = {
+ PINCTRL_CONF_DESC(28, REG_PCIE_RESET_OD, PCIE0_RESET_OD_MASK),
+ PINCTRL_CONF_DESC(29, REG_PCIE_RESET_OD, PCIE1_RESET_OD_MASK),
+};
+
+static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .chip_scu_compatible = "airoha,en7581-chip-scu",
+ .pins = pinctrl_pins,
+ .num_pins = ARRAY_SIZE(pinctrl_pins),
+ .grps = pinctrl_groups,
+ .num_grps = ARRAY_SIZE(pinctrl_groups),
+ .funcs = pinctrl_funcs,
+ .num_funcs = ARRAY_SIZE(pinctrl_funcs),
+ .confs_info = {
+ [AIROHA_PINCTRL_CONFS_PULLUP] = {
+ .confs = pinctrl_pullup_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pullup_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_PULLDOWN] = {
+ .confs = pinctrl_pulldown_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pulldown_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_DRIVE_E2] = {
+ .confs = pinctrl_drive_e2_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e2_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_DRIVE_E4] = {
+ .confs = pinctrl_drive_e4_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e4_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_PCIE_RST_OD] = {
+ .confs = pinctrl_pcie_rst_od_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pcie_rst_od_conf),
+ },
+ },
+};
+
+static const struct of_device_id airoha_pinctrl_of_match[] = {
+ { .compatible = "airoha,an7563-pinctrl", .data = &pinctrl_match_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, airoha_pinctrl_of_match);
+
+static struct platform_driver airoha_pinctrl_driver = {
+ .probe = airoha_pinctrl_probe,
+ .driver = {
+ .name = "pinctrl-airoha-an7563",
+ .of_match_table = airoha_pinctrl_of_match,
+ },
+};
+module_platform_driver(airoha_pinctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>");
+MODULE_AUTHOR("Benjamin Larsson <benjamin.larsson@genexis.eu>");
+MODULE_AUTHOR("Markus Gothe <markus.gothe@genexis.eu>");
+MODULE_DESCRIPTION("Pinctrl driver for Airoha AN7563 SoC");
--
2.53.0
^ permalink raw reply related
* [PATCH v5 15/16] pinctrl: airoha: try to find chip scu node by phandle first
From: Mikhail Kshevetskiy @ 2026-06-22 11:30 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe,
Matheus Sampaio Queiroga
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-1-mikhail.kshevetskiy@iopsys.eu>
The "airoha,en7581-chip-scu" is not a good compatible string in the en7523
case. Let's search chip scu regmap with "airoha,chip-scu" phangle first
and fallback to SoC specific chip scu compatible string on failure.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/pinctrl/airoha/airoha-common.h | 1 +
drivers/pinctrl/airoha/pinctrl-airoha.c | 9 ++++++---
drivers/pinctrl/airoha/pinctrl-an7581.c | 1 +
drivers/pinctrl/airoha/pinctrl-an7583.c | 1 +
drivers/pinctrl/airoha/pinctrl-en7523.c | 1 +
5 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/airoha/airoha-common.h b/drivers/pinctrl/airoha/airoha-common.h
index abd4d2fcd227..79ece49b0c48 100644
--- a/drivers/pinctrl/airoha/airoha-common.h
+++ b/drivers/pinctrl/airoha/airoha-common.h
@@ -189,6 +189,7 @@ struct airoha_pinctrl {
};
struct airoha_pinctrl_match_data {
+ const char *chip_scu_compatible;
const struct pinctrl_pin_desc *pins;
const unsigned int num_pins;
const struct pingroup *grps;
diff --git a/drivers/pinctrl/airoha/pinctrl-airoha.c b/drivers/pinctrl/airoha/pinctrl-airoha.c
index 6f7e65b7792b..2513fe210e03 100644
--- a/drivers/pinctrl/airoha/pinctrl-airoha.c
+++ b/drivers/pinctrl/airoha/pinctrl-airoha.c
@@ -651,9 +651,12 @@ int airoha_pinctrl_probe(struct platform_device *pdev)
if (IS_ERR(pinctrl->regmap))
return PTR_ERR(pinctrl->regmap);
- map = syscon_regmap_lookup_by_compatible("airoha,en7581-chip-scu");
- if (IS_ERR(map))
- return PTR_ERR(map);
+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "airoha,chip-scu");
+ if (IS_ERR_OR_NULL(map)) {
+ map = syscon_regmap_lookup_by_compatible(data->chip_scu_compatible);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+ }
pinctrl->chip_scu = map;
diff --git a/drivers/pinctrl/airoha/pinctrl-an7581.c b/drivers/pinctrl/airoha/pinctrl-an7581.c
index 31bae9697826..280c1c44fd7b 100644
--- a/drivers/pinctrl/airoha/pinctrl-an7581.c
+++ b/drivers/pinctrl/airoha/pinctrl-an7581.c
@@ -1432,6 +1432,7 @@ static const struct airoha_pinctrl_conf pinctrl_pcie_rst_od_conf[] = {
};
static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .chip_scu_compatible = "airoha,en7581-chip-scu",
.pins = pinctrl_pins,
.num_pins = ARRAY_SIZE(pinctrl_pins),
.grps = pinctrl_groups,
diff --git a/drivers/pinctrl/airoha/pinctrl-an7583.c b/drivers/pinctrl/airoha/pinctrl-an7583.c
index 8e74fad32228..7348c948e315 100644
--- a/drivers/pinctrl/airoha/pinctrl-an7583.c
+++ b/drivers/pinctrl/airoha/pinctrl-an7583.c
@@ -1442,6 +1442,7 @@ static const struct airoha_pinctrl_conf pinctrl_pcie_rst_od_conf[] = {
};
static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .chip_scu_compatible = "airoha,en7581-chip-scu",
.pins = pinctrl_pins,
.num_pins = ARRAY_SIZE(pinctrl_pins),
.grps = pinctrl_groups,
diff --git a/drivers/pinctrl/airoha/pinctrl-en7523.c b/drivers/pinctrl/airoha/pinctrl-en7523.c
index d23aa8f826d6..9ef93d87d444 100644
--- a/drivers/pinctrl/airoha/pinctrl-en7523.c
+++ b/drivers/pinctrl/airoha/pinctrl-en7523.c
@@ -1072,6 +1072,7 @@ static const struct airoha_pinctrl_conf pinctrl_drive_e4_conf[] = {
};
static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .chip_scu_compatible = "airoha,en7523-chip-scu",
.pins = pinctrl_pins,
.num_pins = ARRAY_SIZE(pinctrl_pins),
.grps = pinctrl_groups,
--
2.53.0
^ permalink raw reply related
* [PATCH v5 14/16] pinctrl: airoha: add support of en7523 SoC
From: Mikhail Kshevetskiy @ 2026-06-22 11:30 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe,
Matheus Sampaio Queiroga
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-1-mikhail.kshevetskiy@iopsys.eu>
This patch adds support of Airoha en7523 SoC pin controller.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/pinctrl/airoha/Kconfig | 6 +
drivers/pinctrl/airoha/Makefile | 1 +
drivers/pinctrl/airoha/pinctrl-en7523.c | 1122 +++++++++++++++++++++++
3 files changed, 1129 insertions(+)
create mode 100644 drivers/pinctrl/airoha/pinctrl-en7523.c
diff --git a/drivers/pinctrl/airoha/Kconfig b/drivers/pinctrl/airoha/Kconfig
index 08038a5b11c6..159b4496f64a 100644
--- a/drivers/pinctrl/airoha/Kconfig
+++ b/drivers/pinctrl/airoha/Kconfig
@@ -15,6 +15,7 @@ config PINCTRL_AIROHA
select REGMAP_MMIO
imply PINCTRL_AIROHA_AN7581
imply PINCTRL_AIROHA_AN7583
+ imply PINCTRL_AIROHA_EN7523
help
Say yes here to support pin controller and gpio driver
on Airoha SoC.
@@ -29,4 +30,9 @@ config PINCTRL_AIROHA_AN7583
depends on ARM64 || COMPILE_TEST
depends on PINCTRL_AIROHA
+config PINCTRL_AIROHA_EN7523
+ tristate "EN7523 pinctrl"
+ depends on ARM || COMPILE_TEST
+ depends on PINCTRL_AIROHA
+
endmenu
diff --git a/drivers/pinctrl/airoha/Makefile b/drivers/pinctrl/airoha/Makefile
index cfd68c45ae0f..8b9202321ba8 100644
--- a/drivers/pinctrl/airoha/Makefile
+++ b/drivers/pinctrl/airoha/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_PINCTRL_AIROHA) += pinctrl-airoha.o
# SoC drivers
obj-$(CONFIG_PINCTRL_AIROHA_AN7581) += pinctrl-an7581.o
obj-$(CONFIG_PINCTRL_AIROHA_AN7583) += pinctrl-an7583.o
+obj-$(CONFIG_PINCTRL_AIROHA_EN7523) += pinctrl-en7523.o
diff --git a/drivers/pinctrl/airoha/pinctrl-en7523.c b/drivers/pinctrl/airoha/pinctrl-en7523.c
new file mode 100644
index 000000000000..d23aa8f826d6
--- /dev/null
+++ b/drivers/pinctrl/airoha/pinctrl-en7523.c
@@ -0,0 +1,1122 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Author: Lorenzo Bianconi <lorenzo@kernel.org>
+ * Author: Benjamin Larsson <benjamin.larsson@genexis.eu>
+ * Author: Markus Gothe <markus.gothe@genexis.eu>
+ * Author: Matheus Sampaio Queiroga <srherobrine20@gmail.com>
+ * Author: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
+ */
+#include "airoha-common.h"
+
+/* MUX */
+#define REG_GPIO_2ND_I2C_MODE 0x0210
+#define GPIO_I2S_MODE_MASK BIT(12)
+#define GPIO_I2C_SLAVE_MODE_MODE BIT(11)
+#define GPIO_LAN3_LED1_MODE_MASK BIT(10)
+#define GPIO_LAN3_LED0_MODE_MASK BIT(9)
+#define GPIO_LAN2_LED1_MODE_MASK BIT(8)
+#define GPIO_LAN2_LED0_MODE_MASK BIT(7)
+#define GPIO_LAN1_LED1_MODE_MASK BIT(6)
+#define GPIO_LAN1_LED0_MODE_MASK BIT(5)
+#define GPIO_LAN0_LED1_MODE_MASK BIT(4)
+#define GPIO_LAN0_LED0_MODE_MASK BIT(3)
+#define PON_TOD_1PPS_MODE_MASK BIT(2)
+#define GSW_TOD_1PPS_MODE_MASK BIT(1)
+#define GPIO_2ND_I2C_MODE_MASK BIT(0)
+
+#define REG_GPIO_SPI_CS1_MODE 0x0214
+#define GPIO_PCM_SPI_CS4_MODE_MASK BIT(21)
+#define GPIO_PCM_SPI_CS3_MODE_MASK BIT(20)
+#define GPIO_PCM_SPI_CS2_MODE_P156_MASK BIT(19)
+#define GPIO_PCM_SPI_CS2_MODE_P128_MASK BIT(18)
+#define GPIO_PCM_SPI_CS1_MODE_MASK BIT(17)
+#define GPIO_PCM_SPI_MODE_MASK BIT(16)
+#define GPIO_PCM2_MODE_MASK BIT(13)
+#define GPIO_PCM1_MODE_MASK BIT(12)
+#define GPIO_PCM_INT_MODE_MASK BIT(9)
+#define GPIO_PCM_RESET_MODE_MASK BIT(8)
+#define GPIO_SPI_QUAD_MODE_MASK BIT(4)
+#define GPIO_SPI_CS1_MODE_MASK BIT(0)
+
+#define REG_GPIO_PON_MODE 0x0218
+#define GPIO_SGMII_MDIO_MODE_MASK BIT(13)
+#define SIPO_RCLK_MODE_MASK BIT(11)
+#define GPIO_PCIE_RESET1_MASK BIT(10)
+#define GPIO_PCIE_RESET0_MASK BIT(9)
+#define GPIO_UART2_MODE_MASK BIT(3)
+#define GPIO_SIPO_MODE_MASK BIT(2)
+#define GPIO_PON_MODE_MASK BIT(0)
+
+#define REG_NPU_UART_EN 0x0220
+#define JTAG_UDI_EN_MASK BIT(4)
+#define JTAG_DFD_EN_MASK BIT(3)
+#define NPU_UART_EN_MASK BIT(2)
+
+#define REG_FORCE_GPIO_EN 0x0224
+#define FORCE_GPIO_EN(n) BIT(n)
+
+/* LED MAP */
+#define REG_LAN_LED0_MAPPING 0x0278
+#define REG_LAN_LED1_MAPPING 0x027c
+
+#define LAN3_LED_MAPPING_MASK GENMASK(14, 12)
+#define LAN3_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN3_LED_MAPPING_MASK, (_n))
+
+#define LAN2_LED_MAPPING_MASK GENMASK(10, 8)
+#define LAN2_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN2_LED_MAPPING_MASK, (_n))
+
+#define LAN1_LED_MAPPING_MASK GENMASK(6, 4)
+#define LAN1_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN1_LED_MAPPING_MASK, (_n))
+
+#define LAN0_LED_MAPPING_MASK GENMASK(2, 0)
+#define LAN0_PHY_LED_MAP(_n) FIELD_PREP_CONST(LAN0_LED_MAPPING_MASK, (_n))
+
+/* CONF */
+#define REG_I2C_SDA_E2 0x001c
+#define SPI_MISO_E2_MASK BIT(13)
+#define SPI_MOSI_E2_MASK BIT(12)
+#define SPI_CLK_E2_MASK BIT(11)
+#define SPI_CS0_E2_MASK BIT(10)
+#define PCIE1_RESET_E2_MASK BIT(9)
+#define PCIE0_RESET_E2_MASK BIT(8)
+#define UART1_RXD_E2_MASK BIT(3)
+#define UART1_TXD_E2_MASK BIT(2)
+#define I2C_SCL_E2_MASK BIT(1)
+#define I2C_SDA_E2_MASK BIT(0)
+
+#define REG_I2C_SDA_E4 0x0020
+#define SPI_MISO_E4_MASK BIT(13)
+#define SPI_MOSI_E4_MASK BIT(12)
+#define SPI_CLK_E4_MASK BIT(11)
+#define SPI_CS0_E4_MASK BIT(10)
+#define PCIE1_RESET_E4_MASK BIT(9)
+#define PCIE0_RESET_E4_MASK BIT(8)
+#define UART1_RXD_E4_MASK BIT(3)
+#define UART1_TXD_E4_MASK BIT(2)
+#define I2C_SCL_E4_MASK BIT(1)
+#define I2C_SDA_E4_MASK BIT(0)
+
+#define REG_GPIO_L_E2 0x0024
+#define REG_GPIO_L_E4 0x0028
+
+#define REG_I2C_SDA_PU 0x0044
+#define SPI_MISO_PU_MASK BIT(13)
+#define SPI_MOSI_PU_MASK BIT(12)
+#define SPI_CLK_PU_MASK BIT(11)
+#define SPI_CS0_PU_MASK BIT(10)
+#define PCIE1_RESET_PU_MASK BIT(9)
+#define PCIE0_RESET_PU_MASK BIT(8)
+#define UART1_RXD_PU_MASK BIT(3)
+#define UART1_TXD_PU_MASK BIT(2)
+#define I2C_SCL_PU_MASK BIT(1)
+#define I2C_SDA_PU_MASK BIT(0)
+
+#define REG_I2C_SDA_PD 0x0048
+#define SPI_MISO_PD_MASK BIT(13)
+#define SPI_MOSI_PD_MASK BIT(12)
+#define SPI_CLK_PD_MASK BIT(11)
+#define SPI_CS0_PD_MASK BIT(10)
+#define PCIE1_RESET_PD_MASK BIT(9)
+#define PCIE0_RESET_PD_MASK BIT(8)
+#define UART1_RXD_PD_MASK BIT(3)
+#define UART1_TXD_PD_MASK BIT(2)
+#define I2C_SCL_PD_MASK BIT(1)
+#define I2C_SDA_PD_MASK BIT(0)
+
+#define REG_GPIO_L_PU 0x004c
+#define REG_GPIO_L_PD 0x0050
+
+/* PWM MODE CONF */
+#define REG_GPIO_FLASH_MODE_CFG 0x0034
+#define GPIO15_FLASH_MODE_CFG BIT(15)
+#define GPIO14_FLASH_MODE_CFG BIT(14)
+#define GPIO13_FLASH_MODE_CFG BIT(13)
+#define GPIO12_FLASH_MODE_CFG BIT(12)
+#define GPIO11_FLASH_MODE_CFG BIT(11)
+#define GPIO10_FLASH_MODE_CFG BIT(10)
+#define GPIO9_FLASH_MODE_CFG BIT(9)
+#define GPIO8_FLASH_MODE_CFG BIT(8)
+#define GPIO7_FLASH_MODE_CFG BIT(7)
+#define GPIO6_FLASH_MODE_CFG BIT(6)
+#define GPIO5_FLASH_MODE_CFG BIT(5)
+#define GPIO4_FLASH_MODE_CFG BIT(4)
+#define GPIO3_FLASH_MODE_CFG BIT(3)
+#define GPIO2_FLASH_MODE_CFG BIT(2)
+#define GPIO1_FLASH_MODE_CFG BIT(1)
+#define GPIO0_FLASH_MODE_CFG BIT(0)
+
+/* PWM MODE CONF EXT */
+#define REG_GPIO_FLASH_MODE_CFG_EXT 0x0068
+#define GPIO51_FLASH_MODE_CFG BIT(31)
+#define GPIO50_FLASH_MODE_CFG BIT(30)
+#define GPIO49_FLASH_MODE_CFG BIT(29)
+#define GPIO48_FLASH_MODE_CFG BIT(28)
+#define GPIO47_FLASH_MODE_CFG BIT(27)
+#define GPIO46_FLASH_MODE_CFG BIT(26)
+#define GPIO45_FLASH_MODE_CFG BIT(25)
+#define GPIO44_FLASH_MODE_CFG BIT(24)
+#define GPIO43_FLASH_MODE_CFG BIT(23)
+#define GPIO42_FLASH_MODE_CFG BIT(22)
+#define GPIO41_FLASH_MODE_CFG BIT(21)
+#define GPIO40_FLASH_MODE_CFG BIT(20)
+#define GPIO39_FLASH_MODE_CFG BIT(19)
+#define GPIO38_FLASH_MODE_CFG BIT(18)
+#define GPIO37_FLASH_MODE_CFG BIT(17)
+#define GPIO36_FLASH_MODE_CFG BIT(16)
+#define GPIO31_FLASH_MODE_CFG BIT(15)
+#define GPIO30_FLASH_MODE_CFG BIT(14)
+#define GPIO29_FLASH_MODE_CFG BIT(13)
+#define GPIO28_FLASH_MODE_CFG BIT(12)
+#define GPIO27_FLASH_MODE_CFG BIT(11)
+#define GPIO26_FLASH_MODE_CFG BIT(10)
+#define GPIO25_FLASH_MODE_CFG BIT(9)
+#define GPIO24_FLASH_MODE_CFG BIT(8)
+#define GPIO23_FLASH_MODE_CFG BIT(7)
+#define GPIO22_FLASH_MODE_CFG BIT(6)
+#define GPIO21_FLASH_MODE_CFG BIT(5)
+#define GPIO20_FLASH_MODE_CFG BIT(4)
+#define GPIO19_FLASH_MODE_CFG BIT(3)
+#define GPIO18_FLASH_MODE_CFG BIT(2)
+#define GPIO17_FLASH_MODE_CFG BIT(1)
+#define GPIO16_FLASH_MODE_CFG BIT(0)
+
+#define AIROHA_PINCTRL_GPIO(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_GPIO_EXT(gpio, mux_val, smux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ 0 \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (smux_val), \
+ (smux_val) \
+ }, \
+ .regmap_size = 2, \
+ }
+
+/* PWM */
+#define AIROHA_PINCTRL_PWM(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_MUX, \
+ REG_GPIO_FLASH_MODE_CFG, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_PWM_EXT(gpio, mux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap_size = 1, \
+ }
+
+#define AIROHA_PINCTRL_PWM_EXT_SEC(gpio, mux_val, smux_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_PWM_EXT_MUX, \
+ REG_GPIO_FLASH_MODE_CFG_EXT, \
+ (mux_val), \
+ (mux_val) \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_PON_MODE, \
+ (smux_val), \
+ (smux_val) \
+ }, \
+ .regmap_size = 2, \
+ }
+
+#define AIROHA_PINCTRL_PHY_LED0(gpio, mux_val, map_mask, map_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_2ND_I2C_MODE, \
+ (mux_val), \
+ (mux_val), \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_LAN_LED0_MAPPING, \
+ (map_mask), \
+ (map_val), \
+ }, \
+ .regmap_size = 2, \
+ }
+
+#define AIROHA_PINCTRL_PHY_LED1(gpio, mux_val, map_mask, map_val) \
+ { \
+ .name = (gpio), \
+ .regmap[0] = { \
+ AIROHA_FUNC_MUX, \
+ REG_GPIO_2ND_I2C_MODE, \
+ (mux_val), \
+ (mux_val), \
+ }, \
+ .regmap[1] = { \
+ AIROHA_FUNC_MUX, \
+ REG_LAN_LED1_MAPPING, \
+ (map_mask), \
+ (map_val), \
+ }, \
+ .regmap_size = 2, \
+ }
+
+static struct pinctrl_pin_desc pinctrl_pins[] = {
+ PINCTRL_PIN(2, "i2c_sda"),
+ PINCTRL_PIN(3, "i2c_scl"),
+ PINCTRL_PIN(4, "spi_cs0"),
+ PINCTRL_PIN(5, "spi_clk"),
+ PINCTRL_PIN(6, "spi_mosi"),
+ PINCTRL_PIN(7, "spi_miso"),
+ PINCTRL_PIN(8, "uart1_txd"),
+ PINCTRL_PIN(9, "uart1_rxd"),
+ PINCTRL_PIN(12, "gpio0"),
+ PINCTRL_PIN(13, "gpio1"),
+ PINCTRL_PIN(14, "gpio2"),
+ PINCTRL_PIN(15, "gpio3"),
+ PINCTRL_PIN(16, "gpio4"),
+ PINCTRL_PIN(17, "gpio5"),
+ PINCTRL_PIN(18, "gpio6"),
+ PINCTRL_PIN(19, "gpio7"),
+ PINCTRL_PIN(20, "gpio8"),
+ PINCTRL_PIN(21, "gpio9"),
+ PINCTRL_PIN(22, "gpio10"),
+ PINCTRL_PIN(23, "gpio11"),
+ PINCTRL_PIN(24, "gpio12"),
+ PINCTRL_PIN(25, "gpio13"),
+ PINCTRL_PIN(26, "gpio14"),
+ PINCTRL_PIN(27, "gpio15"),
+ PINCTRL_PIN(28, "gpio16"),
+ PINCTRL_PIN(29, "gpio17"),
+ PINCTRL_PIN(30, "gpio18"),
+ PINCTRL_PIN(31, "gpio19"),
+ PINCTRL_PIN(32, "gpio20"),
+ PINCTRL_PIN(33, "gpio21"),
+ PINCTRL_PIN(34, "gpio22"),
+ PINCTRL_PIN(35, "gpio23"),
+ PINCTRL_PIN(36, "gpio24"),
+ PINCTRL_PIN(37, "gpio25"),
+ PINCTRL_PIN(38, "gpio26"),
+ PINCTRL_PIN(39, "gpio27"),
+ PINCTRL_PIN(40, "pcie_reset0"),
+ PINCTRL_PIN(41, "pcie_reset1"),
+};
+
+static const int pon_pins[] = { 28, 29, 30, 31, 32, 33 };
+static const int pon_tod_1pps_pins[] = { 21 };
+static const int gsw_tod_1pps_pins[] = { 21 };
+static const int sipo_pins[] = { 13, 38 };
+static const int sipo_rclk_pins[] = { 13, 30, 38 };
+static const int mdio_pins[] = { 20, 21 };
+static const int uart2_pins[] = { 20, 21 };
+static const int npu_uart_pins[] = { 13, 38 };
+static const int i2c0_pins[] = { 2, 3 };
+static const int i2c1_pins[] = { 14, 15 };
+static const int jtag_udi_pins[] = { 34, 35, 36, 37, 38 };
+static const int jtag_dfd_pins[] = { 34, 35, 36, 37, 38 };
+static const int i2s_pins[] = { 16, 17, 18, 19 };
+static const int pcm1_pins[] = { 24, 25, 26, 27 };
+static const int pcm2_pins[] = { 16, 17, 18, 19 };
+static const int spi_pins[] = { 4, 5, 6, 7 };
+static const int spi_quad_pins[] = { 14, 15 };
+static const int spi_cs1_pins[] = { 21 };
+static const int pcm_spi_pins[] = { 16, 17, 18, 19, 24, 25, 26, 27 };
+static const int pcm_spi_int_pins[] = { 15 };
+static const int pcm_spi_rst_pins[] = { 14 };
+static const int pcm_spi_cs1_pins[] = { 22 };
+static const int pcm_spi_cs2_p128_pins[] = { 39 };
+static const int pcm_spi_cs2_p156_pins[] = { 39 };
+static const int pcm_spi_cs3_pins[] = { 20 };
+static const int pcm_spi_cs4_pins[] = { 23 };
+static const int gpio0_pins[] = { 12 };
+static const int gpio1_pins[] = { 13 };
+static const int gpio2_pins[] = { 14 };
+static const int gpio3_pins[] = { 15 };
+static const int gpio4_pins[] = { 16 };
+static const int gpio5_pins[] = { 17 };
+static const int gpio6_pins[] = { 18 };
+static const int gpio7_pins[] = { 19 };
+static const int gpio8_pins[] = { 20 };
+static const int gpio9_pins[] = { 21 };
+static const int gpio10_pins[] = { 22 };
+static const int gpio11_pins[] = { 23 };
+static const int gpio12_pins[] = { 24 };
+static const int gpio13_pins[] = { 25 };
+static const int gpio14_pins[] = { 26 };
+static const int gpio15_pins[] = { 27 };
+static const int gpio16_pins[] = { 28 };
+static const int gpio17_pins[] = { 29 };
+static const int gpio18_pins[] = { 30 };
+static const int gpio19_pins[] = { 31 };
+static const int gpio20_pins[] = { 32 };
+static const int gpio21_pins[] = { 33 };
+static const int gpio22_pins[] = { 34 };
+static const int gpio23_pins[] = { 35 };
+static const int gpio24_pins[] = { 36 };
+static const int gpio25_pins[] = { 37 };
+static const int gpio26_pins[] = { 38 };
+static const int gpio27_pins[] = { 39 };
+static const int gpio28_pins[] = { 40 };
+static const int gpio29_pins[] = { 41 };
+static const int pcie_reset0_pins[] = { 40 };
+static const int pcie_reset1_pins[] = { 41 };
+
+static const struct pingroup pinctrl_groups[] = {
+ PINCTRL_PIN_GROUP("pon", pon),
+ PINCTRL_PIN_GROUP("pon_tod_1pps", pon_tod_1pps),
+ PINCTRL_PIN_GROUP("gsw_tod_1pps", gsw_tod_1pps),
+ PINCTRL_PIN_GROUP("sipo", sipo),
+ PINCTRL_PIN_GROUP("sipo_rclk", sipo_rclk),
+ PINCTRL_PIN_GROUP("mdio", mdio),
+ PINCTRL_PIN_GROUP("uart2", uart2),
+ PINCTRL_PIN_GROUP("npu_uart", npu_uart),
+ PINCTRL_PIN_GROUP("i2c0", i2c0),
+ PINCTRL_PIN_GROUP("i2c1", i2c1),
+ PINCTRL_PIN_GROUP("jtag_udi", jtag_udi),
+ PINCTRL_PIN_GROUP("jtag_dfd", jtag_dfd),
+ PINCTRL_PIN_GROUP("i2s", i2s),
+ PINCTRL_PIN_GROUP("pcm1", pcm1),
+ PINCTRL_PIN_GROUP("pcm2", pcm2),
+ PINCTRL_PIN_GROUP("spi", spi),
+ PINCTRL_PIN_GROUP("spi_quad", spi_quad),
+ PINCTRL_PIN_GROUP("spi_cs1", spi_cs1),
+ PINCTRL_PIN_GROUP("pcm_spi", pcm_spi),
+ PINCTRL_PIN_GROUP("pcm_spi_int", pcm_spi_int),
+ PINCTRL_PIN_GROUP("pcm_spi_rst", pcm_spi_rst),
+ PINCTRL_PIN_GROUP("pcm_spi_cs1", pcm_spi_cs1),
+ PINCTRL_PIN_GROUP("pcm_spi_cs2_p128", pcm_spi_cs2_p128),
+ PINCTRL_PIN_GROUP("pcm_spi_cs2_p156", pcm_spi_cs2_p156),
+ PINCTRL_PIN_GROUP("pcm_spi_cs3", pcm_spi_cs3),
+ PINCTRL_PIN_GROUP("pcm_spi_cs4", pcm_spi_cs4),
+ PINCTRL_PIN_GROUP("gpio0", gpio0),
+ PINCTRL_PIN_GROUP("gpio1", gpio1),
+ PINCTRL_PIN_GROUP("gpio2", gpio2),
+ PINCTRL_PIN_GROUP("gpio3", gpio3),
+ PINCTRL_PIN_GROUP("gpio4", gpio4),
+ PINCTRL_PIN_GROUP("gpio5", gpio5),
+ PINCTRL_PIN_GROUP("gpio6", gpio6),
+ PINCTRL_PIN_GROUP("gpio7", gpio7),
+ PINCTRL_PIN_GROUP("gpio8", gpio8),
+ PINCTRL_PIN_GROUP("gpio9", gpio9),
+ PINCTRL_PIN_GROUP("gpio10", gpio10),
+ PINCTRL_PIN_GROUP("gpio11", gpio11),
+ PINCTRL_PIN_GROUP("gpio12", gpio12),
+ PINCTRL_PIN_GROUP("gpio13", gpio13),
+ PINCTRL_PIN_GROUP("gpio14", gpio14),
+ PINCTRL_PIN_GROUP("gpio15", gpio15),
+ PINCTRL_PIN_GROUP("gpio16", gpio16),
+ PINCTRL_PIN_GROUP("gpio17", gpio17),
+ PINCTRL_PIN_GROUP("gpio18", gpio18),
+ PINCTRL_PIN_GROUP("gpio19", gpio19),
+ PINCTRL_PIN_GROUP("gpio20", gpio20),
+ PINCTRL_PIN_GROUP("gpio21", gpio21),
+ PINCTRL_PIN_GROUP("gpio22", gpio22),
+ PINCTRL_PIN_GROUP("gpio23", gpio23),
+ PINCTRL_PIN_GROUP("gpio24", gpio24),
+ PINCTRL_PIN_GROUP("gpio25", gpio25),
+ PINCTRL_PIN_GROUP("gpio26", gpio26),
+ PINCTRL_PIN_GROUP("gpio27", gpio27),
+ PINCTRL_PIN_GROUP("gpio28", gpio28),
+ PINCTRL_PIN_GROUP("gpio29", gpio29),
+ PINCTRL_PIN_GROUP("pcie_reset0", pcie_reset0),
+ PINCTRL_PIN_GROUP("pcie_reset1", pcie_reset1),
+};
+
+static const char *const pon_groups[] = { "pon" };
+static const char *const tod_1pps_groups[] = {
+ "pon_tod_1pps", "gsw_tod_1pps"
+};
+static const char *const sipo_groups[] = { "sipo", "sipo_rclk" };
+static const char *const mdio_groups[] = { "mdio" };
+static const char *const uart_groups[] = { "uart2", "npu_uart" };
+static const char *const i2c_groups[] = { "i2c1" };
+static const char *const jtag_groups[] = { "jtag_udi", "jtag_dfd" };
+static const char *const pcm_groups[] = { "pcm1", "pcm2" };
+static const char *const spi_groups[] = { "spi_quad", "spi_cs1" };
+static const char *const pcm_spi_groups[] = {
+ "pcm_spi", "pcm_spi_int", "pcm_spi_rst", "pcm_spi_cs1",
+ "pcm_spi_cs2_p156", "pcm_spi_cs2_p128", "pcm_spi_cs3", "pcm_spi_cs4"
+};
+static const char *const i2s_groups[] = { "i2s" };
+static const char *const gpio_groups[] = { "gpio28", "gpio29" };
+static const char *const pcie_reset_groups[] = {
+ "pcie_reset0", "pcie_reset1"
+};
+static const char *const pwm_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5",
+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17",
+ "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", "gpio23",
+ "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29"
+};
+static const char *const phy1_led0_groups[] = {
+ "gpio22", "gpio23", "gpio24", "gpio25"
+};
+static const char *const phy2_led0_groups[] = {
+ "gpio22", "gpio23", "gpio24", "gpio25"
+};
+static const char *const phy3_led0_groups[] = {
+ "gpio22", "gpio23", "gpio24", "gpio25"
+};
+static const char *const phy4_led0_groups[] = {
+ "gpio22", "gpio23", "gpio24", "gpio25"
+};
+static const char *const phy1_led1_groups[] = {
+ "gpio7", "gpio6", "gpio5", "gpio4"
+};
+static const char *const phy2_led1_groups[] = {
+ "gpio7", "gpio6", "gpio5", "gpio4"
+};
+static const char *const phy3_led1_groups[] = {
+ "gpio7", "gpio6", "gpio5", "gpio4"
+};
+static const char *const phy4_led1_groups[] = {
+ "gpio7", "gpio6", "gpio5", "gpio4"
+};
+
+static const struct airoha_pinctrl_func_group pon_func_group[] = {
+ {
+ .name = "pon",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PON_MODE_MASK,
+ GPIO_PON_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group tod_1pps_func_group[] = {
+ {
+ .name = "pon_tod_1pps",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_2ND_I2C_MODE,
+ PON_TOD_1PPS_MODE_MASK,
+ PON_TOD_1PPS_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "gsw_tod_1pps",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_2ND_I2C_MODE,
+ GSW_TOD_1PPS_MODE_MASK,
+ GSW_TOD_1PPS_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group sipo_func_group[] = {
+ {
+ .name = "sipo",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK,
+ GPIO_SIPO_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "sipo_rclk",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK,
+ GPIO_SIPO_MODE_MASK | SIPO_RCLK_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group mdio_func_group[] = {
+ {
+ .name = "mdio",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_SGMII_MDIO_MODE_MASK,
+ GPIO_SGMII_MDIO_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group uart_func_group[] = {
+ {
+ .name = "uart2",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_UART2_MODE_MASK,
+ GPIO_UART2_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "npu_uart",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ NPU_UART_EN_MASK,
+ NPU_UART_EN_MASK
+ },
+ .regmap_size = 1,
+ }
+};
+
+static const struct airoha_pinctrl_func_group i2c_func_group[] = {
+ {
+ .name = "i2c1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_2ND_I2C_MODE,
+ GPIO_2ND_I2C_MODE_MASK,
+ GPIO_2ND_I2C_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group jtag_func_group[] = {
+ {
+ .name = "jtag_udi",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ JTAG_UDI_EN_MASK,
+ JTAG_UDI_EN_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "jtag_dfd",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_NPU_UART_EN,
+ JTAG_DFD_EN_MASK,
+ JTAG_DFD_EN_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group pcm_func_group[] = {
+ {
+ .name = "pcm1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM1_MODE_MASK,
+ GPIO_PCM1_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm2",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM2_MODE_MASK,
+ GPIO_PCM2_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group spi_func_group[] = {
+ {
+ .name = "spi_quad",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_SPI_QUAD_MODE_MASK,
+ GPIO_SPI_QUAD_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "spi_cs1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_SPI_CS1_MODE_MASK,
+ GPIO_SPI_CS1_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group pcm_spi_func_group[] = {
+ {
+ .name = "pcm_spi",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_SPI_MODE_MASK,
+ GPIO_PCM_SPI_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_int",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_INT_MODE_MASK,
+ GPIO_PCM_INT_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_rst",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_RESET_MODE_MASK,
+ GPIO_PCM_RESET_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_cs1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_SPI_CS1_MODE_MASK,
+ GPIO_PCM_SPI_CS1_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_cs2_p128",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_SPI_CS2_MODE_P128_MASK,
+ GPIO_PCM_SPI_CS2_MODE_P128_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_cs2_p156",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_SPI_CS2_MODE_P156_MASK,
+ GPIO_PCM_SPI_CS2_MODE_P156_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_cs3",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_SPI_CS3_MODE_MASK,
+ GPIO_PCM_SPI_CS3_MODE_MASK
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcm_spi_cs4",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_SPI_CS1_MODE,
+ GPIO_PCM_SPI_CS4_MODE_MASK,
+ GPIO_PCM_SPI_CS4_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group i2s_func_group[] = {
+ {
+ .name = "i2s",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_2ND_I2C_MODE,
+ GPIO_I2S_MODE_MASK,
+ GPIO_I2S_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group gpio_func_group[] = {
+ AIROHA_PINCTRL_GPIO_EXT("gpio28", GPIO28_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET0_MASK),
+ AIROHA_PINCTRL_GPIO_EXT("gpio29", GPIO29_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET1_MASK),
+};
+
+static const struct airoha_pinctrl_func_group pcie_reset_func_group[] = {
+ {
+ .name = "pcie_reset0",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PCIE_RESET0_MASK,
+ 0
+ },
+ .regmap_size = 1,
+ }, {
+ .name = "pcie_reset1",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PCIE_RESET1_MASK,
+ 0
+ },
+ .regmap_size = 1,
+ },
+};
+
+static const struct airoha_pinctrl_func_group pwm_func_group[] = {
+ AIROHA_PINCTRL_PWM("gpio0", GPIO0_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio1", GPIO1_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio2", GPIO2_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio3", GPIO3_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio4", GPIO4_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio5", GPIO5_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio6", GPIO6_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio7", GPIO7_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio8", GPIO8_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio9", GPIO9_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio10", GPIO10_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio11", GPIO11_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio12", GPIO12_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio13", GPIO13_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio14", GPIO14_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM("gpio15", GPIO15_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio16", GPIO16_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio17", GPIO17_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio18", GPIO18_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio19", GPIO19_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio20", GPIO20_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio21", GPIO21_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio22", GPIO22_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio23", GPIO23_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio24", GPIO24_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio25", GPIO25_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio26", GPIO26_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT("gpio27", GPIO27_FLASH_MODE_CFG),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio28", GPIO28_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET0_MASK),
+ AIROHA_PINCTRL_PWM_EXT_SEC("gpio29", GPIO29_FLASH_MODE_CFG,
+ GPIO_PCIE_RESET1_MASK),
+};
+
+static const struct airoha_pinctrl_func_group phy1_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio22", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio23", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio24", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED0("gpio25", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(0)),
+};
+
+static const struct airoha_pinctrl_func_group phy2_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio22", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio23", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio24", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED0("gpio25", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(1)),
+};
+
+static const struct airoha_pinctrl_func_group phy3_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio22", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio23", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio24", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED0("gpio25", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(2)),
+};
+
+static const struct airoha_pinctrl_func_group phy4_led0_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED0("gpio22", GPIO_LAN0_LED0_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio23", GPIO_LAN1_LED0_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio24", GPIO_LAN2_LED0_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED0("gpio25", GPIO_LAN3_LED0_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
+};
+
+static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(0)),
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(0)),
+};
+
+static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(1)),
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(1)),
+};
+
+static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(2)),
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(2)),
+};
+
+static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
+ AIROHA_PINCTRL_PHY_LED1("gpio7", GPIO_LAN0_LED1_MODE_MASK,
+ LAN0_LED_MAPPING_MASK, LAN0_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio6", GPIO_LAN1_LED1_MODE_MASK,
+ LAN1_LED_MAPPING_MASK, LAN1_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio5", GPIO_LAN2_LED1_MODE_MASK,
+ LAN2_LED_MAPPING_MASK, LAN2_PHY_LED_MAP(3)),
+ AIROHA_PINCTRL_PHY_LED1("gpio4", GPIO_LAN3_LED1_MODE_MASK,
+ LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
+};
+
+static const struct airoha_pinctrl_func pinctrl_funcs[] = {
+ PINCTRL_FUNC_DESC("pon", pon),
+ PINCTRL_FUNC_DESC("tod_1pps", tod_1pps),
+ PINCTRL_FUNC_DESC("sipo", sipo),
+ PINCTRL_FUNC_DESC("mdio", mdio),
+ PINCTRL_FUNC_DESC("uart", uart),
+ PINCTRL_FUNC_DESC("i2c", i2c),
+ PINCTRL_FUNC_DESC("jtag", jtag),
+ PINCTRL_FUNC_DESC("pcm", pcm),
+ PINCTRL_FUNC_DESC("spi", spi),
+ PINCTRL_FUNC_DESC("pcm_spi", pcm_spi),
+ PINCTRL_FUNC_DESC("i2s", i2s),
+ PINCTRL_FUNC_DESC("gpio", gpio),
+ PINCTRL_FUNC_DESC("pcie_reset", pcie_reset),
+ PINCTRL_FUNC_DESC("pwm", pwm),
+ PINCTRL_FUNC_DESC("phy1_led0", phy1_led0),
+ PINCTRL_FUNC_DESC("phy2_led0", phy2_led0),
+ PINCTRL_FUNC_DESC("phy3_led0", phy3_led0),
+ PINCTRL_FUNC_DESC("phy4_led0", phy4_led0),
+ PINCTRL_FUNC_DESC("phy1_led1", phy1_led1),
+ PINCTRL_FUNC_DESC("phy2_led1", phy2_led1),
+ PINCTRL_FUNC_DESC("phy3_led1", phy3_led1),
+ PINCTRL_FUNC_DESC("phy4_led1", phy4_led1),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pullup_conf[] = {
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_PU, BIT(0)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_PU, BIT(1)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_PU, BIT(2)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_PU, BIT(3)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_PU, BIT(4)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_PU, BIT(5)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_PU, BIT(6)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_PU, BIT(7)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_PU, BIT(8)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_PU, BIT(9)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_PU, BIT(10)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_PU, BIT(11)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_PU, BIT(12)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_PU, BIT(13)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_PU, BIT(14)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_PU, BIT(15)),
+ PINCTRL_CONF_DESC(28, REG_GPIO_L_PU, BIT(16)),
+ PINCTRL_CONF_DESC(29, REG_GPIO_L_PU, BIT(17)),
+ PINCTRL_CONF_DESC(30, REG_GPIO_L_PU, BIT(18)),
+ PINCTRL_CONF_DESC(31, REG_GPIO_L_PU, BIT(19)),
+ PINCTRL_CONF_DESC(32, REG_GPIO_L_PU, BIT(20)),
+ PINCTRL_CONF_DESC(33, REG_GPIO_L_PU, BIT(21)),
+ PINCTRL_CONF_DESC(34, REG_GPIO_L_PU, BIT(22)),
+ PINCTRL_CONF_DESC(35, REG_GPIO_L_PU, BIT(23)),
+ PINCTRL_CONF_DESC(36, REG_GPIO_L_PU, BIT(24)),
+ PINCTRL_CONF_DESC(37, REG_GPIO_L_PU, BIT(25)),
+ PINCTRL_CONF_DESC(38, REG_GPIO_L_PU, BIT(26)),
+ PINCTRL_CONF_DESC(39, REG_GPIO_L_PU, BIT(27)),
+ PINCTRL_CONF_DESC(40, REG_GPIO_L_PU, BIT(28)),
+ PINCTRL_CONF_DESC(41, REG_GPIO_L_PU, BIT(29)),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_pulldown_conf[] = {
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_PD, BIT(0)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_PD, BIT(1)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_PD, BIT(2)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_PD, BIT(3)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_PD, BIT(4)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_PD, BIT(5)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_PD, BIT(6)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_PD, BIT(7)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_PD, BIT(8)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_PD, BIT(9)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_PD, BIT(10)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_PD, BIT(11)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_PD, BIT(12)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_PD, BIT(13)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_PD, BIT(14)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_PD, BIT(15)),
+ PINCTRL_CONF_DESC(28, REG_GPIO_L_PD, BIT(16)),
+ PINCTRL_CONF_DESC(29, REG_GPIO_L_PD, BIT(17)),
+ PINCTRL_CONF_DESC(30, REG_GPIO_L_PD, BIT(18)),
+ PINCTRL_CONF_DESC(31, REG_GPIO_L_PD, BIT(19)),
+ PINCTRL_CONF_DESC(32, REG_GPIO_L_PD, BIT(20)),
+ PINCTRL_CONF_DESC(33, REG_GPIO_L_PD, BIT(21)),
+ PINCTRL_CONF_DESC(34, REG_GPIO_L_PD, BIT(22)),
+ PINCTRL_CONF_DESC(35, REG_GPIO_L_PD, BIT(23)),
+ PINCTRL_CONF_DESC(36, REG_GPIO_L_PD, BIT(24)),
+ PINCTRL_CONF_DESC(37, REG_GPIO_L_PD, BIT(25)),
+ PINCTRL_CONF_DESC(38, REG_GPIO_L_PD, BIT(26)),
+ PINCTRL_CONF_DESC(39, REG_GPIO_L_PD, BIT(27)),
+ PINCTRL_CONF_DESC(40, REG_GPIO_L_PD, BIT(28)),
+ PINCTRL_CONF_DESC(41, REG_GPIO_L_PD, BIT(29)),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_drive_e2_conf[] = {
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_E2, BIT(0)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_E2, BIT(1)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_E2, BIT(2)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_E2, BIT(3)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_E2, BIT(4)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_E2, BIT(5)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_E2, BIT(6)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_E2, BIT(7)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_E2, BIT(8)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_E2, BIT(9)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_E2, BIT(10)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_E2, BIT(11)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_E2, BIT(12)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_E2, BIT(13)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_E2, BIT(14)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_E2, BIT(15)),
+ PINCTRL_CONF_DESC(28, REG_GPIO_L_E2, BIT(16)),
+ PINCTRL_CONF_DESC(29, REG_GPIO_L_E2, BIT(17)),
+ PINCTRL_CONF_DESC(30, REG_GPIO_L_E2, BIT(18)),
+ PINCTRL_CONF_DESC(31, REG_GPIO_L_E2, BIT(19)),
+ PINCTRL_CONF_DESC(32, REG_GPIO_L_E2, BIT(20)),
+ PINCTRL_CONF_DESC(33, REG_GPIO_L_E2, BIT(21)),
+ PINCTRL_CONF_DESC(34, REG_GPIO_L_E2, BIT(22)),
+ PINCTRL_CONF_DESC(35, REG_GPIO_L_E2, BIT(23)),
+ PINCTRL_CONF_DESC(36, REG_GPIO_L_E2, BIT(24)),
+ PINCTRL_CONF_DESC(37, REG_GPIO_L_E2, BIT(25)),
+ PINCTRL_CONF_DESC(38, REG_GPIO_L_E2, BIT(26)),
+ PINCTRL_CONF_DESC(39, REG_GPIO_L_E2, BIT(27)),
+ PINCTRL_CONF_DESC(40, REG_GPIO_L_E2, BIT(28)),
+ PINCTRL_CONF_DESC(41, REG_GPIO_L_E2, BIT(29)),
+};
+
+static const struct airoha_pinctrl_conf pinctrl_drive_e4_conf[] = {
+ PINCTRL_CONF_DESC(12, REG_GPIO_L_E4, BIT(0)),
+ PINCTRL_CONF_DESC(13, REG_GPIO_L_E4, BIT(1)),
+ PINCTRL_CONF_DESC(14, REG_GPIO_L_E4, BIT(2)),
+ PINCTRL_CONF_DESC(15, REG_GPIO_L_E4, BIT(3)),
+ PINCTRL_CONF_DESC(16, REG_GPIO_L_E4, BIT(4)),
+ PINCTRL_CONF_DESC(17, REG_GPIO_L_E4, BIT(5)),
+ PINCTRL_CONF_DESC(18, REG_GPIO_L_E4, BIT(6)),
+ PINCTRL_CONF_DESC(19, REG_GPIO_L_E4, BIT(7)),
+ PINCTRL_CONF_DESC(20, REG_GPIO_L_E4, BIT(8)),
+ PINCTRL_CONF_DESC(21, REG_GPIO_L_E4, BIT(9)),
+ PINCTRL_CONF_DESC(22, REG_GPIO_L_E4, BIT(10)),
+ PINCTRL_CONF_DESC(23, REG_GPIO_L_E4, BIT(11)),
+ PINCTRL_CONF_DESC(24, REG_GPIO_L_E4, BIT(12)),
+ PINCTRL_CONF_DESC(25, REG_GPIO_L_E4, BIT(13)),
+ PINCTRL_CONF_DESC(26, REG_GPIO_L_E4, BIT(14)),
+ PINCTRL_CONF_DESC(27, REG_GPIO_L_E4, BIT(15)),
+ PINCTRL_CONF_DESC(28, REG_GPIO_L_E4, BIT(16)),
+ PINCTRL_CONF_DESC(29, REG_GPIO_L_E4, BIT(17)),
+ PINCTRL_CONF_DESC(30, REG_GPIO_L_E4, BIT(18)),
+ PINCTRL_CONF_DESC(31, REG_GPIO_L_E4, BIT(19)),
+ PINCTRL_CONF_DESC(32, REG_GPIO_L_E4, BIT(20)),
+ PINCTRL_CONF_DESC(33, REG_GPIO_L_E4, BIT(21)),
+ PINCTRL_CONF_DESC(34, REG_GPIO_L_E4, BIT(22)),
+ PINCTRL_CONF_DESC(35, REG_GPIO_L_E4, BIT(23)),
+ PINCTRL_CONF_DESC(36, REG_GPIO_L_E4, BIT(24)),
+ PINCTRL_CONF_DESC(37, REG_GPIO_L_E4, BIT(25)),
+ PINCTRL_CONF_DESC(38, REG_GPIO_L_E4, BIT(26)),
+ PINCTRL_CONF_DESC(39, REG_GPIO_L_E4, BIT(27)),
+ PINCTRL_CONF_DESC(40, REG_GPIO_L_E4, BIT(28)),
+ PINCTRL_CONF_DESC(41, REG_GPIO_L_E4, BIT(29)),
+};
+
+static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .pins = pinctrl_pins,
+ .num_pins = ARRAY_SIZE(pinctrl_pins),
+ .grps = pinctrl_groups,
+ .num_grps = ARRAY_SIZE(pinctrl_groups),
+ .funcs = pinctrl_funcs,
+ .num_funcs = ARRAY_SIZE(pinctrl_funcs),
+ .confs_info = {
+ [AIROHA_PINCTRL_CONFS_PULLUP] = {
+ .confs = pinctrl_pullup_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pullup_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_PULLDOWN] = {
+ .confs = pinctrl_pulldown_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pulldown_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_DRIVE_E2] = {
+ .confs = pinctrl_drive_e2_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e2_conf),
+ },
+ [AIROHA_PINCTRL_CONFS_DRIVE_E4] = {
+ .confs = pinctrl_drive_e4_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e4_conf),
+ },
+ },
+};
+
+static const struct of_device_id airoha_pinctrl_of_match[] = {
+ { .compatible = "airoha,en7523-pinctrl", .data = &pinctrl_match_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, airoha_pinctrl_of_match);
+
+static struct platform_driver airoha_pinctrl_driver = {
+ .probe = airoha_pinctrl_probe,
+ .driver = {
+ .name = "pinctrl-airoha-en7523",
+ .of_match_table = airoha_pinctrl_of_match,
+ },
+};
+module_platform_driver(airoha_pinctrl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>");
+MODULE_AUTHOR("Benjamin Larsson <benjamin.larsson@genexis.eu>");
+MODULE_AUTHOR("Markus Gothe <markus.gothe@genexis.eu>");
+MODULE_AUTHOR("Matheus Sampaio Queiroga <srherobrine20@gmail.com>");
+MODULE_AUTHOR("Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>");
+MODULE_DESCRIPTION("Pinctrl driver for Airoha EN7523 SoC");
--
2.53.0
^ permalink raw reply related
* [PATCH v5 08/16] pinctrl: airoha: an7581: remove en7581 prefix from variable names
From: Mikhail Kshevetskiy @ 2026-06-22 11:30 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe,
Matheus Sampaio Queiroga
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-1-mikhail.kshevetskiy@iopsys.eu>
We have only an7581 specific code in the pinctrl-an7581 kernel module,
so 'en7581_' prefix is not necessary anymore. Remove it.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/pinctrl/airoha/pinctrl-an7581.c | 398 ++++++++++++------------
1 file changed, 199 insertions(+), 199 deletions(-)
diff --git a/drivers/pinctrl/airoha/pinctrl-an7581.c b/drivers/pinctrl/airoha/pinctrl-an7581.c
index 7db050535058..31bae9697826 100644
--- a/drivers/pinctrl/airoha/pinctrl-an7581.c
+++ b/drivers/pinctrl/airoha/pinctrl-an7581.c
@@ -316,7 +316,7 @@
.regmap_size = 2, \
}
-static struct pinctrl_pin_desc en7581_pinctrl_pins[] = {
+static struct pinctrl_pin_desc pinctrl_pins[] = {
PINCTRL_PIN(0, "uart1_txd"),
PINCTRL_PIN(1, "uart1_rxd"),
PINCTRL_PIN(2, "i2c_scl"),
@@ -377,184 +377,184 @@ static struct pinctrl_pin_desc en7581_pinctrl_pins[] = {
PINCTRL_PIN(62, "pcie_reset2"),
};
-static const int en7581_pon_pins[] = { 49, 50, 51, 52, 53, 54 };
-static const int en7581_pon_tod_1pps_pins[] = { 46 };
-static const int en7581_gsw_tod_1pps_pins[] = { 46 };
-static const int en7581_sipo_pins[] = { 16, 17 };
-static const int en7581_sipo_rclk_pins[] = { 16, 17, 43 };
-static const int en7581_mdio_pins[] = { 14, 15 };
-static const int en7581_uart2_pins[] = { 48, 55 };
-static const int en7581_uart2_cts_rts_pins[] = { 46, 47 };
-static const int en7581_hsuart_pins[] = { 28, 29 };
-static const int en7581_hsuart_cts_rts_pins[] = { 26, 27 };
-static const int en7581_uart4_pins[] = { 38, 39 };
-static const int en7581_uart5_pins[] = { 18, 19 };
-static const int en7581_i2c0_pins[] = { 2, 3 };
-static const int en7581_i2c1_pins[] = { 14, 15 };
-static const int en7581_jtag_udi_pins[] = { 16, 17, 18, 19, 20 };
-static const int en7581_jtag_dfd_pins[] = { 16, 17, 18, 19, 20 };
-static const int en7581_i2s_pins[] = { 26, 27, 28, 29 };
-static const int en7581_pcm1_pins[] = { 22, 23, 24, 25 };
-static const int en7581_pcm2_pins[] = { 18, 19, 20, 21 };
-static const int en7581_spi_quad_pins[] = { 32, 33 };
-static const int en7581_spi_pins[] = { 4, 5, 6, 7 };
-static const int en7581_spi_cs1_pins[] = { 34 };
-static const int en7581_pcm_spi_pins[] = { 18, 19, 20, 21, 22, 23, 24, 25 };
-static const int en7581_pcm_spi_int_pins[] = { 14 };
-static const int en7581_pcm_spi_rst_pins[] = { 15 };
-static const int en7581_pcm_spi_cs1_pins[] = { 43 };
-static const int en7581_pcm_spi_cs2_pins[] = { 40 };
-static const int en7581_pcm_spi_cs2_p128_pins[] = { 40 };
-static const int en7581_pcm_spi_cs2_p156_pins[] = { 40 };
-static const int en7581_pcm_spi_cs3_pins[] = { 41 };
-static const int en7581_pcm_spi_cs4_pins[] = { 42 };
-static const int en7581_emmc_pins[] = {
+static const int pon_pins[] = { 49, 50, 51, 52, 53, 54 };
+static const int pon_tod_1pps_pins[] = { 46 };
+static const int gsw_tod_1pps_pins[] = { 46 };
+static const int sipo_pins[] = { 16, 17 };
+static const int sipo_rclk_pins[] = { 16, 17, 43 };
+static const int mdio_pins[] = { 14, 15 };
+static const int uart2_pins[] = { 48, 55 };
+static const int uart2_cts_rts_pins[] = { 46, 47 };
+static const int hsuart_pins[] = { 28, 29 };
+static const int hsuart_cts_rts_pins[] = { 26, 27 };
+static const int uart4_pins[] = { 38, 39 };
+static const int uart5_pins[] = { 18, 19 };
+static const int i2c0_pins[] = { 2, 3 };
+static const int i2c1_pins[] = { 14, 15 };
+static const int jtag_udi_pins[] = { 16, 17, 18, 19, 20 };
+static const int jtag_dfd_pins[] = { 16, 17, 18, 19, 20 };
+static const int i2s_pins[] = { 26, 27, 28, 29 };
+static const int pcm1_pins[] = { 22, 23, 24, 25 };
+static const int pcm2_pins[] = { 18, 19, 20, 21 };
+static const int spi_quad_pins[] = { 32, 33 };
+static const int spi_pins[] = { 4, 5, 6, 7 };
+static const int spi_cs1_pins[] = { 34 };
+static const int pcm_spi_pins[] = { 18, 19, 20, 21, 22, 23, 24, 25 };
+static const int pcm_spi_int_pins[] = { 14 };
+static const int pcm_spi_rst_pins[] = { 15 };
+static const int pcm_spi_cs1_pins[] = { 43 };
+static const int pcm_spi_cs2_pins[] = { 40 };
+static const int pcm_spi_cs2_p128_pins[] = { 40 };
+static const int pcm_spi_cs2_p156_pins[] = { 40 };
+static const int pcm_spi_cs3_pins[] = { 41 };
+static const int pcm_spi_cs4_pins[] = { 42 };
+static const int emmc_pins[] = {
4, 5, 6, 30, 31, 32, 33, 34, 35, 36, 37
};
-static const int en7581_pnand_pins[] = {
+static const int pnand_pins[] = {
4, 5, 6, 7, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42
};
-static const int en7581_gpio0_pins[] = { 13 };
-static const int en7581_gpio1_pins[] = { 14 };
-static const int en7581_gpio2_pins[] = { 15 };
-static const int en7581_gpio3_pins[] = { 16 };
-static const int en7581_gpio4_pins[] = { 17 };
-static const int en7581_gpio5_pins[] = { 18 };
-static const int en7581_gpio6_pins[] = { 19 };
-static const int en7581_gpio7_pins[] = { 20 };
-static const int en7581_gpio8_pins[] = { 21 };
-static const int en7581_gpio9_pins[] = { 22 };
-static const int en7581_gpio10_pins[] = { 23 };
-static const int en7581_gpio11_pins[] = { 24 };
-static const int en7581_gpio12_pins[] = { 25 };
-static const int en7581_gpio13_pins[] = { 26 };
-static const int en7581_gpio14_pins[] = { 27 };
-static const int en7581_gpio15_pins[] = { 28 };
-static const int en7581_gpio16_pins[] = { 29 };
-static const int en7581_gpio17_pins[] = { 30 };
-static const int en7581_gpio18_pins[] = { 31 };
-static const int en7581_gpio19_pins[] = { 32 };
-static const int en7581_gpio20_pins[] = { 33 };
-static const int en7581_gpio21_pins[] = { 34 };
-static const int en7581_gpio22_pins[] = { 35 };
-static const int en7581_gpio23_pins[] = { 36 };
-static const int en7581_gpio24_pins[] = { 37 };
-static const int en7581_gpio25_pins[] = { 38 };
-static const int en7581_gpio26_pins[] = { 39 };
-static const int en7581_gpio27_pins[] = { 40 };
-static const int en7581_gpio28_pins[] = { 41 };
-static const int en7581_gpio29_pins[] = { 42 };
-static const int en7581_gpio30_pins[] = { 43 };
-static const int en7581_gpio31_pins[] = { 44 };
-static const int en7581_gpio32_pins[] = { 45 };
-static const int en7581_gpio33_pins[] = { 46 };
-static const int en7581_gpio34_pins[] = { 47 };
-static const int en7581_gpio35_pins[] = { 48 };
-static const int en7581_gpio36_pins[] = { 49 };
-static const int en7581_gpio37_pins[] = { 50 };
-static const int en7581_gpio38_pins[] = { 51 };
-static const int en7581_gpio39_pins[] = { 52 };
-static const int en7581_gpio40_pins[] = { 53 };
-static const int en7581_gpio41_pins[] = { 54 };
-static const int en7581_gpio42_pins[] = { 55 };
-static const int en7581_gpio43_pins[] = { 56 };
-static const int en7581_gpio44_pins[] = { 57 };
-static const int en7581_gpio45_pins[] = { 58 };
-static const int en7581_gpio46_pins[] = { 59 };
-static const int en7581_gpio47_pins[] = { 60 };
-static const int en7581_gpio48_pins[] = { 61 };
-static const int en7581_gpio49_pins[] = { 62 };
-static const int en7581_pcie_reset0_pins[] = { 60 };
-static const int en7581_pcie_reset1_pins[] = { 61 };
-static const int en7581_pcie_reset2_pins[] = { 62 };
-
-static const struct pingroup en7581_pinctrl_groups[] = {
- PINCTRL_PIN_GROUP("pon", en7581_pon),
- PINCTRL_PIN_GROUP("pon_tod_1pps", en7581_pon_tod_1pps),
- PINCTRL_PIN_GROUP("gsw_tod_1pps", en7581_gsw_tod_1pps),
- PINCTRL_PIN_GROUP("sipo", en7581_sipo),
- PINCTRL_PIN_GROUP("sipo_rclk", en7581_sipo_rclk),
- PINCTRL_PIN_GROUP("mdio", en7581_mdio),
- PINCTRL_PIN_GROUP("uart2", en7581_uart2),
- PINCTRL_PIN_GROUP("uart2_cts_rts", en7581_uart2_cts_rts),
- PINCTRL_PIN_GROUP("hsuart", en7581_hsuart),
- PINCTRL_PIN_GROUP("hsuart_cts_rts", en7581_hsuart_cts_rts),
- PINCTRL_PIN_GROUP("uart4", en7581_uart4),
- PINCTRL_PIN_GROUP("uart5", en7581_uart5),
- PINCTRL_PIN_GROUP("i2c0", en7581_i2c0),
- PINCTRL_PIN_GROUP("i2c1", en7581_i2c1),
- PINCTRL_PIN_GROUP("jtag_udi", en7581_jtag_udi),
- PINCTRL_PIN_GROUP("jtag_dfd", en7581_jtag_dfd),
- PINCTRL_PIN_GROUP("i2s", en7581_i2s),
- PINCTRL_PIN_GROUP("pcm1", en7581_pcm1),
- PINCTRL_PIN_GROUP("pcm2", en7581_pcm2),
- PINCTRL_PIN_GROUP("spi", en7581_spi),
- PINCTRL_PIN_GROUP("spi_quad", en7581_spi_quad),
- PINCTRL_PIN_GROUP("spi_cs1", en7581_spi_cs1),
- PINCTRL_PIN_GROUP("pcm_spi", en7581_pcm_spi),
- PINCTRL_PIN_GROUP("pcm_spi_int", en7581_pcm_spi_int),
- PINCTRL_PIN_GROUP("pcm_spi_rst", en7581_pcm_spi_rst),
- PINCTRL_PIN_GROUP("pcm_spi_cs1", en7581_pcm_spi_cs1),
- PINCTRL_PIN_GROUP("pcm_spi_cs2_p128", en7581_pcm_spi_cs2_p128),
- PINCTRL_PIN_GROUP("pcm_spi_cs2_p156", en7581_pcm_spi_cs2_p156),
- PINCTRL_PIN_GROUP("pcm_spi_cs2", en7581_pcm_spi_cs2),
- PINCTRL_PIN_GROUP("pcm_spi_cs3", en7581_pcm_spi_cs3),
- PINCTRL_PIN_GROUP("pcm_spi_cs4", en7581_pcm_spi_cs4),
- PINCTRL_PIN_GROUP("emmc", en7581_emmc),
- PINCTRL_PIN_GROUP("pnand", en7581_pnand),
- PINCTRL_PIN_GROUP("gpio0", en7581_gpio0),
- PINCTRL_PIN_GROUP("gpio1", en7581_gpio1),
- PINCTRL_PIN_GROUP("gpio2", en7581_gpio2),
- PINCTRL_PIN_GROUP("gpio3", en7581_gpio3),
- PINCTRL_PIN_GROUP("gpio4", en7581_gpio4),
- PINCTRL_PIN_GROUP("gpio5", en7581_gpio5),
- PINCTRL_PIN_GROUP("gpio6", en7581_gpio6),
- PINCTRL_PIN_GROUP("gpio7", en7581_gpio7),
- PINCTRL_PIN_GROUP("gpio8", en7581_gpio8),
- PINCTRL_PIN_GROUP("gpio9", en7581_gpio9),
- PINCTRL_PIN_GROUP("gpio10", en7581_gpio10),
- PINCTRL_PIN_GROUP("gpio11", en7581_gpio11),
- PINCTRL_PIN_GROUP("gpio12", en7581_gpio12),
- PINCTRL_PIN_GROUP("gpio13", en7581_gpio13),
- PINCTRL_PIN_GROUP("gpio14", en7581_gpio14),
- PINCTRL_PIN_GROUP("gpio15", en7581_gpio15),
- PINCTRL_PIN_GROUP("gpio16", en7581_gpio16),
- PINCTRL_PIN_GROUP("gpio17", en7581_gpio17),
- PINCTRL_PIN_GROUP("gpio18", en7581_gpio18),
- PINCTRL_PIN_GROUP("gpio19", en7581_gpio19),
- PINCTRL_PIN_GROUP("gpio20", en7581_gpio20),
- PINCTRL_PIN_GROUP("gpio21", en7581_gpio21),
- PINCTRL_PIN_GROUP("gpio22", en7581_gpio22),
- PINCTRL_PIN_GROUP("gpio23", en7581_gpio23),
- PINCTRL_PIN_GROUP("gpio24", en7581_gpio24),
- PINCTRL_PIN_GROUP("gpio25", en7581_gpio25),
- PINCTRL_PIN_GROUP("gpio26", en7581_gpio26),
- PINCTRL_PIN_GROUP("gpio27", en7581_gpio27),
- PINCTRL_PIN_GROUP("gpio28", en7581_gpio28),
- PINCTRL_PIN_GROUP("gpio29", en7581_gpio29),
- PINCTRL_PIN_GROUP("gpio30", en7581_gpio30),
- PINCTRL_PIN_GROUP("gpio31", en7581_gpio31),
- PINCTRL_PIN_GROUP("gpio32", en7581_gpio32),
- PINCTRL_PIN_GROUP("gpio33", en7581_gpio33),
- PINCTRL_PIN_GROUP("gpio34", en7581_gpio34),
- PINCTRL_PIN_GROUP("gpio35", en7581_gpio35),
- PINCTRL_PIN_GROUP("gpio36", en7581_gpio36),
- PINCTRL_PIN_GROUP("gpio37", en7581_gpio37),
- PINCTRL_PIN_GROUP("gpio38", en7581_gpio38),
- PINCTRL_PIN_GROUP("gpio39", en7581_gpio39),
- PINCTRL_PIN_GROUP("gpio40", en7581_gpio40),
- PINCTRL_PIN_GROUP("gpio41", en7581_gpio41),
- PINCTRL_PIN_GROUP("gpio42", en7581_gpio42),
- PINCTRL_PIN_GROUP("gpio43", en7581_gpio43),
- PINCTRL_PIN_GROUP("gpio44", en7581_gpio44),
- PINCTRL_PIN_GROUP("gpio45", en7581_gpio45),
- PINCTRL_PIN_GROUP("gpio46", en7581_gpio46),
- PINCTRL_PIN_GROUP("gpio47", en7581_gpio47),
- PINCTRL_PIN_GROUP("gpio48", en7581_gpio48),
- PINCTRL_PIN_GROUP("gpio49", en7581_gpio49),
- PINCTRL_PIN_GROUP("pcie_reset0", en7581_pcie_reset0),
- PINCTRL_PIN_GROUP("pcie_reset1", en7581_pcie_reset1),
- PINCTRL_PIN_GROUP("pcie_reset2", en7581_pcie_reset2),
+static const int gpio0_pins[] = { 13 };
+static const int gpio1_pins[] = { 14 };
+static const int gpio2_pins[] = { 15 };
+static const int gpio3_pins[] = { 16 };
+static const int gpio4_pins[] = { 17 };
+static const int gpio5_pins[] = { 18 };
+static const int gpio6_pins[] = { 19 };
+static const int gpio7_pins[] = { 20 };
+static const int gpio8_pins[] = { 21 };
+static const int gpio9_pins[] = { 22 };
+static const int gpio10_pins[] = { 23 };
+static const int gpio11_pins[] = { 24 };
+static const int gpio12_pins[] = { 25 };
+static const int gpio13_pins[] = { 26 };
+static const int gpio14_pins[] = { 27 };
+static const int gpio15_pins[] = { 28 };
+static const int gpio16_pins[] = { 29 };
+static const int gpio17_pins[] = { 30 };
+static const int gpio18_pins[] = { 31 };
+static const int gpio19_pins[] = { 32 };
+static const int gpio20_pins[] = { 33 };
+static const int gpio21_pins[] = { 34 };
+static const int gpio22_pins[] = { 35 };
+static const int gpio23_pins[] = { 36 };
+static const int gpio24_pins[] = { 37 };
+static const int gpio25_pins[] = { 38 };
+static const int gpio26_pins[] = { 39 };
+static const int gpio27_pins[] = { 40 };
+static const int gpio28_pins[] = { 41 };
+static const int gpio29_pins[] = { 42 };
+static const int gpio30_pins[] = { 43 };
+static const int gpio31_pins[] = { 44 };
+static const int gpio32_pins[] = { 45 };
+static const int gpio33_pins[] = { 46 };
+static const int gpio34_pins[] = { 47 };
+static const int gpio35_pins[] = { 48 };
+static const int gpio36_pins[] = { 49 };
+static const int gpio37_pins[] = { 50 };
+static const int gpio38_pins[] = { 51 };
+static const int gpio39_pins[] = { 52 };
+static const int gpio40_pins[] = { 53 };
+static const int gpio41_pins[] = { 54 };
+static const int gpio42_pins[] = { 55 };
+static const int gpio43_pins[] = { 56 };
+static const int gpio44_pins[] = { 57 };
+static const int gpio45_pins[] = { 58 };
+static const int gpio46_pins[] = { 59 };
+static const int gpio47_pins[] = { 60 };
+static const int gpio48_pins[] = { 61 };
+static const int gpio49_pins[] = { 62 };
+static const int pcie_reset0_pins[] = { 60 };
+static const int pcie_reset1_pins[] = { 61 };
+static const int pcie_reset2_pins[] = { 62 };
+
+static const struct pingroup pinctrl_groups[] = {
+ PINCTRL_PIN_GROUP("pon", pon),
+ PINCTRL_PIN_GROUP("pon_tod_1pps", pon_tod_1pps),
+ PINCTRL_PIN_GROUP("gsw_tod_1pps", gsw_tod_1pps),
+ PINCTRL_PIN_GROUP("sipo", sipo),
+ PINCTRL_PIN_GROUP("sipo_rclk", sipo_rclk),
+ PINCTRL_PIN_GROUP("mdio", mdio),
+ PINCTRL_PIN_GROUP("uart2", uart2),
+ PINCTRL_PIN_GROUP("uart2_cts_rts", uart2_cts_rts),
+ PINCTRL_PIN_GROUP("hsuart", hsuart),
+ PINCTRL_PIN_GROUP("hsuart_cts_rts", hsuart_cts_rts),
+ PINCTRL_PIN_GROUP("uart4", uart4),
+ PINCTRL_PIN_GROUP("uart5", uart5),
+ PINCTRL_PIN_GROUP("i2c0", i2c0),
+ PINCTRL_PIN_GROUP("i2c1", i2c1),
+ PINCTRL_PIN_GROUP("jtag_udi", jtag_udi),
+ PINCTRL_PIN_GROUP("jtag_dfd", jtag_dfd),
+ PINCTRL_PIN_GROUP("i2s", i2s),
+ PINCTRL_PIN_GROUP("pcm1", pcm1),
+ PINCTRL_PIN_GROUP("pcm2", pcm2),
+ PINCTRL_PIN_GROUP("spi", spi),
+ PINCTRL_PIN_GROUP("spi_quad", spi_quad),
+ PINCTRL_PIN_GROUP("spi_cs1", spi_cs1),
+ PINCTRL_PIN_GROUP("pcm_spi", pcm_spi),
+ PINCTRL_PIN_GROUP("pcm_spi_int", pcm_spi_int),
+ PINCTRL_PIN_GROUP("pcm_spi_rst", pcm_spi_rst),
+ PINCTRL_PIN_GROUP("pcm_spi_cs1", pcm_spi_cs1),
+ PINCTRL_PIN_GROUP("pcm_spi_cs2_p128", pcm_spi_cs2_p128),
+ PINCTRL_PIN_GROUP("pcm_spi_cs2_p156", pcm_spi_cs2_p156),
+ PINCTRL_PIN_GROUP("pcm_spi_cs2", pcm_spi_cs2),
+ PINCTRL_PIN_GROUP("pcm_spi_cs3", pcm_spi_cs3),
+ PINCTRL_PIN_GROUP("pcm_spi_cs4", pcm_spi_cs4),
+ PINCTRL_PIN_GROUP("emmc", emmc),
+ PINCTRL_PIN_GROUP("pnand", pnand),
+ PINCTRL_PIN_GROUP("gpio0", gpio0),
+ PINCTRL_PIN_GROUP("gpio1", gpio1),
+ PINCTRL_PIN_GROUP("gpio2", gpio2),
+ PINCTRL_PIN_GROUP("gpio3", gpio3),
+ PINCTRL_PIN_GROUP("gpio4", gpio4),
+ PINCTRL_PIN_GROUP("gpio5", gpio5),
+ PINCTRL_PIN_GROUP("gpio6", gpio6),
+ PINCTRL_PIN_GROUP("gpio7", gpio7),
+ PINCTRL_PIN_GROUP("gpio8", gpio8),
+ PINCTRL_PIN_GROUP("gpio9", gpio9),
+ PINCTRL_PIN_GROUP("gpio10", gpio10),
+ PINCTRL_PIN_GROUP("gpio11", gpio11),
+ PINCTRL_PIN_GROUP("gpio12", gpio12),
+ PINCTRL_PIN_GROUP("gpio13", gpio13),
+ PINCTRL_PIN_GROUP("gpio14", gpio14),
+ PINCTRL_PIN_GROUP("gpio15", gpio15),
+ PINCTRL_PIN_GROUP("gpio16", gpio16),
+ PINCTRL_PIN_GROUP("gpio17", gpio17),
+ PINCTRL_PIN_GROUP("gpio18", gpio18),
+ PINCTRL_PIN_GROUP("gpio19", gpio19),
+ PINCTRL_PIN_GROUP("gpio20", gpio20),
+ PINCTRL_PIN_GROUP("gpio21", gpio21),
+ PINCTRL_PIN_GROUP("gpio22", gpio22),
+ PINCTRL_PIN_GROUP("gpio23", gpio23),
+ PINCTRL_PIN_GROUP("gpio24", gpio24),
+ PINCTRL_PIN_GROUP("gpio25", gpio25),
+ PINCTRL_PIN_GROUP("gpio26", gpio26),
+ PINCTRL_PIN_GROUP("gpio27", gpio27),
+ PINCTRL_PIN_GROUP("gpio28", gpio28),
+ PINCTRL_PIN_GROUP("gpio29", gpio29),
+ PINCTRL_PIN_GROUP("gpio30", gpio30),
+ PINCTRL_PIN_GROUP("gpio31", gpio31),
+ PINCTRL_PIN_GROUP("gpio32", gpio32),
+ PINCTRL_PIN_GROUP("gpio33", gpio33),
+ PINCTRL_PIN_GROUP("gpio34", gpio34),
+ PINCTRL_PIN_GROUP("gpio35", gpio35),
+ PINCTRL_PIN_GROUP("gpio36", gpio36),
+ PINCTRL_PIN_GROUP("gpio37", gpio37),
+ PINCTRL_PIN_GROUP("gpio38", gpio38),
+ PINCTRL_PIN_GROUP("gpio39", gpio39),
+ PINCTRL_PIN_GROUP("gpio40", gpio40),
+ PINCTRL_PIN_GROUP("gpio41", gpio41),
+ PINCTRL_PIN_GROUP("gpio42", gpio42),
+ PINCTRL_PIN_GROUP("gpio43", gpio43),
+ PINCTRL_PIN_GROUP("gpio44", gpio44),
+ PINCTRL_PIN_GROUP("gpio45", gpio45),
+ PINCTRL_PIN_GROUP("gpio46", gpio46),
+ PINCTRL_PIN_GROUP("gpio47", gpio47),
+ PINCTRL_PIN_GROUP("gpio48", gpio48),
+ PINCTRL_PIN_GROUP("gpio49", gpio49),
+ PINCTRL_PIN_GROUP("pcie_reset0", pcie_reset0),
+ PINCTRL_PIN_GROUP("pcie_reset1", pcie_reset1),
+ PINCTRL_PIN_GROUP("pcie_reset2", pcie_reset2),
};
static const char *const pon_groups[] = { "pon" };
@@ -1154,7 +1154,7 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
LAN3_LED_MAPPING_MASK, LAN3_PHY_LED_MAP(3)),
};
-static const struct airoha_pinctrl_func en7581_pinctrl_funcs[] = {
+static const struct airoha_pinctrl_func pinctrl_funcs[] = {
PINCTRL_FUNC_DESC("pon", pon),
PINCTRL_FUNC_DESC("tod_1pps", tod_1pps),
PINCTRL_FUNC_DESC("sipo", sipo),
@@ -1181,7 +1181,7 @@ static const struct airoha_pinctrl_func en7581_pinctrl_funcs[] = {
PINCTRL_FUNC_DESC("phy4_led1", phy4_led1),
};
-static const struct airoha_pinctrl_conf en7581_pinctrl_pullup_conf[] = {
+static const struct airoha_pinctrl_conf pinctrl_pullup_conf[] = {
PINCTRL_CONF_DESC(0, REG_I2C_SDA_PU, UART1_TXD_PU_MASK),
PINCTRL_CONF_DESC(1, REG_I2C_SDA_PU, UART1_RXD_PU_MASK),
PINCTRL_CONF_DESC(2, REG_I2C_SDA_PU, I2C_SDA_PU_MASK),
@@ -1242,7 +1242,7 @@ static const struct airoha_pinctrl_conf en7581_pinctrl_pullup_conf[] = {
PINCTRL_CONF_DESC(62, REG_I2C_SDA_PU, PCIE2_RESET_PU_MASK),
};
-static const struct airoha_pinctrl_conf en7581_pinctrl_pulldown_conf[] = {
+static const struct airoha_pinctrl_conf pinctrl_pulldown_conf[] = {
PINCTRL_CONF_DESC(0, REG_I2C_SDA_PD, UART1_TXD_PD_MASK),
PINCTRL_CONF_DESC(1, REG_I2C_SDA_PD, UART1_RXD_PD_MASK),
PINCTRL_CONF_DESC(2, REG_I2C_SDA_PD, I2C_SDA_PD_MASK),
@@ -1303,7 +1303,7 @@ static const struct airoha_pinctrl_conf en7581_pinctrl_pulldown_conf[] = {
PINCTRL_CONF_DESC(62, REG_I2C_SDA_PD, PCIE2_RESET_PD_MASK),
};
-static const struct airoha_pinctrl_conf en7581_pinctrl_drive_e2_conf[] = {
+static const struct airoha_pinctrl_conf pinctrl_drive_e2_conf[] = {
PINCTRL_CONF_DESC(0, REG_I2C_SDA_E2, UART1_TXD_E2_MASK),
PINCTRL_CONF_DESC(1, REG_I2C_SDA_E2, UART1_RXD_E2_MASK),
PINCTRL_CONF_DESC(2, REG_I2C_SDA_E2, I2C_SDA_E2_MASK),
@@ -1364,7 +1364,7 @@ static const struct airoha_pinctrl_conf en7581_pinctrl_drive_e2_conf[] = {
PINCTRL_CONF_DESC(62, REG_I2C_SDA_E2, PCIE2_RESET_E2_MASK),
};
-static const struct airoha_pinctrl_conf en7581_pinctrl_drive_e4_conf[] = {
+static const struct airoha_pinctrl_conf pinctrl_drive_e4_conf[] = {
PINCTRL_CONF_DESC(0, REG_I2C_SDA_E4, UART1_TXD_E4_MASK),
PINCTRL_CONF_DESC(1, REG_I2C_SDA_E4, UART1_RXD_E4_MASK),
PINCTRL_CONF_DESC(2, REG_I2C_SDA_E4, I2C_SDA_E4_MASK),
@@ -1425,45 +1425,45 @@ static const struct airoha_pinctrl_conf en7581_pinctrl_drive_e4_conf[] = {
PINCTRL_CONF_DESC(62, REG_I2C_SDA_E4, PCIE2_RESET_E4_MASK),
};
-static const struct airoha_pinctrl_conf en7581_pinctrl_pcie_rst_od_conf[] = {
+static const struct airoha_pinctrl_conf pinctrl_pcie_rst_od_conf[] = {
PINCTRL_CONF_DESC(60, REG_PCIE_RESET_OD, PCIE0_RESET_OD_MASK),
PINCTRL_CONF_DESC(61, REG_PCIE_RESET_OD, PCIE1_RESET_OD_MASK),
PINCTRL_CONF_DESC(62, REG_PCIE_RESET_OD, PCIE2_RESET_OD_MASK),
};
-static const struct airoha_pinctrl_match_data en7581_pinctrl_match_data = {
- .pins = en7581_pinctrl_pins,
- .num_pins = ARRAY_SIZE(en7581_pinctrl_pins),
- .grps = en7581_pinctrl_groups,
- .num_grps = ARRAY_SIZE(en7581_pinctrl_groups),
- .funcs = en7581_pinctrl_funcs,
- .num_funcs = ARRAY_SIZE(en7581_pinctrl_funcs),
+static const struct airoha_pinctrl_match_data pinctrl_match_data = {
+ .pins = pinctrl_pins,
+ .num_pins = ARRAY_SIZE(pinctrl_pins),
+ .grps = pinctrl_groups,
+ .num_grps = ARRAY_SIZE(pinctrl_groups),
+ .funcs = pinctrl_funcs,
+ .num_funcs = ARRAY_SIZE(pinctrl_funcs),
.confs_info = {
[AIROHA_PINCTRL_CONFS_PULLUP] = {
- .confs = en7581_pinctrl_pullup_conf,
- .num_confs = ARRAY_SIZE(en7581_pinctrl_pullup_conf),
+ .confs = pinctrl_pullup_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pullup_conf),
},
[AIROHA_PINCTRL_CONFS_PULLDOWN] = {
- .confs = en7581_pinctrl_pulldown_conf,
- .num_confs = ARRAY_SIZE(en7581_pinctrl_pulldown_conf),
+ .confs = pinctrl_pulldown_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pulldown_conf),
},
[AIROHA_PINCTRL_CONFS_DRIVE_E2] = {
- .confs = en7581_pinctrl_drive_e2_conf,
- .num_confs = ARRAY_SIZE(en7581_pinctrl_drive_e2_conf),
+ .confs = pinctrl_drive_e2_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e2_conf),
},
[AIROHA_PINCTRL_CONFS_DRIVE_E4] = {
- .confs = en7581_pinctrl_drive_e4_conf,
- .num_confs = ARRAY_SIZE(en7581_pinctrl_drive_e4_conf),
+ .confs = pinctrl_drive_e4_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_drive_e4_conf),
},
[AIROHA_PINCTRL_CONFS_PCIE_RST_OD] = {
- .confs = en7581_pinctrl_pcie_rst_od_conf,
- .num_confs = ARRAY_SIZE(en7581_pinctrl_pcie_rst_od_conf),
+ .confs = pinctrl_pcie_rst_od_conf,
+ .num_confs = ARRAY_SIZE(pinctrl_pcie_rst_od_conf),
},
},
};
static const struct of_device_id airoha_pinctrl_of_match[] = {
- { .compatible = "airoha,en7581-pinctrl", .data = &en7581_pinctrl_match_data },
+ { .compatible = "airoha,en7581-pinctrl", .data = &pinctrl_match_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, airoha_pinctrl_of_match);
--
2.53.0
^ permalink raw reply related
* [PATCH v5 13/16] pinctrl: airoha: an7583: add support for olt pinmux
From: Mikhail Kshevetskiy @ 2026-06-22 11:30 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe,
Matheus Sampaio Queiroga
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-1-mikhail.kshevetskiy@iopsys.eu>
add support for olt pin function for olt pin group.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/pinctrl/airoha/pinctrl-an7583.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/pinctrl/airoha/pinctrl-an7583.c b/drivers/pinctrl/airoha/pinctrl-an7583.c
index 4d9fc0fe464a..8e74fad32228 100644
--- a/drivers/pinctrl/airoha/pinctrl-an7583.c
+++ b/drivers/pinctrl/airoha/pinctrl-an7583.c
@@ -53,6 +53,7 @@
#define I2C0_SCL_GPIO_MODE_MASK BIT(15)
#define GPIO_PARALLEL_NAND_MODE_MASK BIT(14)
#define GPIO_SGMII_MDIO_MODE_MASK BIT(13)
+#define GPIO_OLT_MODE_MASK BIT(12)
#define SIPO_RCLK_MODE_MASK BIT(11)
#define GPIO_PCIE_RESET1_MASK BIT(10)
#define GPIO_PCIE_RESET0_MASK BIT(9)
@@ -393,6 +394,7 @@ static struct pinctrl_pin_desc pinctrl_pins[] = {
static const int pon_pins[] = { 15, 16, 17, 18, 19, 20 };
static const int pon_alt_pins[] = { 36, 37, 38, 39, 40 };
+static const int olt_pins[] = { 36, 37, 38, 39, 40 };
static const int pon_tod_1pps_pins[] = { 32 };
static const int gsw_tod_1pps_pins[] = { 32 };
static const int sipo_pins[] = { 34, 35 };
@@ -482,6 +484,7 @@ static const int pcie_reset1_pins[] = { 52 };
static const struct pingroup pinctrl_groups[] = {
PINCTRL_PIN_GROUP("pon", pon),
PINCTRL_PIN_GROUP("pon_alt", pon_alt),
+ PINCTRL_PIN_GROUP("olt", olt),
PINCTRL_PIN_GROUP("pon_tod_1pps", pon_tod_1pps),
PINCTRL_PIN_GROUP("gsw_tod_1pps", gsw_tod_1pps),
PINCTRL_PIN_GROUP("sipo", sipo),
@@ -566,6 +569,7 @@ static const struct pingroup pinctrl_groups[] = {
};
static const char *const pon_groups[] = { "pon", "pon_alt" };
+static const char *const olt_groups[] = { "olt" };
static const char *const tod_1pps_groups[] = {
"pon_tod_1pps", "gsw_tod_1pps"
};
@@ -648,6 +652,19 @@ static const struct airoha_pinctrl_func_group pon_func_group[] = {
},
};
+static const struct airoha_pinctrl_func_group olt_func_group[] = {
+ {
+ .name = "olt",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_OLT_MODE_MASK,
+ GPIO_OLT_MODE_MASK
+ },
+ .regmap_size = 1,
+ },
+};
+
static const struct airoha_pinctrl_func_group tod_1pps_func_group[] = {
{
.name = "pon_tod_1pps",
@@ -1171,6 +1188,7 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
static const struct airoha_pinctrl_func pinctrl_funcs[] = {
PINCTRL_FUNC_DESC("pon", pon),
+ PINCTRL_FUNC_DESC("olt", olt),
PINCTRL_FUNC_DESC("tod_1pps", tod_1pps),
PINCTRL_FUNC_DESC("sipo", sipo),
PINCTRL_FUNC_DESC("mdio", mdio),
--
2.53.0
^ permalink raw reply related
* [PATCH v5 12/16] pinctrl: airoha: an7583: add support for pon_alt pinmux
From: Mikhail Kshevetskiy @ 2026-06-22 11:30 UTC (permalink / raw)
To: Linus Walleij, Lorenzo Bianconi, Christian Marangi,
AngeloGioacchino Del Regno, Benjamin Larsson, linux-kernel,
linux-gpio, linux-mediatek, Markus Gothe,
Matheus Sampaio Queiroga
Cc: Mikhail Kshevetskiy
In-Reply-To: <20260622113046.3619139-1-mikhail.kshevetskiy@iopsys.eu>
add support for pon pin function for pon_alt pin group.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
---
drivers/pinctrl/airoha/pinctrl-an7583.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/airoha/pinctrl-an7583.c b/drivers/pinctrl/airoha/pinctrl-an7583.c
index 0cac9a5646ff..4d9fc0fe464a 100644
--- a/drivers/pinctrl/airoha/pinctrl-an7583.c
+++ b/drivers/pinctrl/airoha/pinctrl-an7583.c
@@ -38,6 +38,7 @@
#define GPIO_SPI_CS1_MODE_MASK BIT(0)
#define REG_GPIO_PON_MODE 0x021c
+#define GPIO_PON_ALT_MODE_MASK BIT(27)
#define MDIO_0_GPIO_MODE_MASK BIT(26)
#define MDC_0_GPIO_MODE_MASK BIT(25)
#define UART_RXD_GPIO_MODE_MASK BIT(24)
@@ -391,6 +392,7 @@ static struct pinctrl_pin_desc pinctrl_pins[] = {
};
static const int pon_pins[] = { 15, 16, 17, 18, 19, 20 };
+static const int pon_alt_pins[] = { 36, 37, 38, 39, 40 };
static const int pon_tod_1pps_pins[] = { 32 };
static const int gsw_tod_1pps_pins[] = { 32 };
static const int sipo_pins[] = { 34, 35 };
@@ -479,6 +481,7 @@ static const int pcie_reset1_pins[] = { 52 };
static const struct pingroup pinctrl_groups[] = {
PINCTRL_PIN_GROUP("pon", pon),
+ PINCTRL_PIN_GROUP("pon_alt", pon_alt),
PINCTRL_PIN_GROUP("pon_tod_1pps", pon_tod_1pps),
PINCTRL_PIN_GROUP("gsw_tod_1pps", gsw_tod_1pps),
PINCTRL_PIN_GROUP("sipo", sipo),
@@ -562,7 +565,7 @@ static const struct pingroup pinctrl_groups[] = {
PINCTRL_PIN_GROUP("pcie_reset1", pcie_reset1),
};
-static const char *const pon_groups[] = { "pon" };
+static const char *const pon_groups[] = { "pon", "pon_alt" };
static const char *const tod_1pps_groups[] = {
"pon_tod_1pps", "gsw_tod_1pps"
};
@@ -629,10 +632,19 @@ static const struct airoha_pinctrl_func_group pon_func_group[] = {
.regmap[0] = {
AIROHA_FUNC_MUX,
REG_GPIO_PON_MODE,
- GPIO_PON_MODE_MASK,
+ GPIO_PON_MODE_MASK | GPIO_PON_ALT_MODE_MASK,
GPIO_PON_MODE_MASK
},
.regmap_size = 1,
+ }, {
+ .name = "pon_alt",
+ .regmap[0] = {
+ AIROHA_FUNC_MUX,
+ REG_GPIO_PON_MODE,
+ GPIO_PON_MODE_MASK | GPIO_PON_ALT_MODE_MASK,
+ GPIO_PON_ALT_MODE_MASK
+ },
+ .regmap_size = 1,
},
};
--
2.53.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox