messages from 2026-08-31 11:36:07 to 2026-09-03 03:07:42 UTC [more...]
[PATCH] gpio: altera: Fix build failure caused by undeclared 'irq'
2026-09-03 3:07 UTC
[PATCH v3 0/2] [PATCH v3 0/2] gpio: mmio: report the line direction on chips without direction registers
2026-09-02 22:25 UTC (6+ messages)
` [PATCH v3 1/2] pinctrl: imx: answer OUTPUT_ENABLE/INPUT_ENABLE queries from the pad register
` [PATCH v3 2/2] gpio: mmio: track the direction of chips without direction registers
[PATCH RESEND v9 0/9] Add support for MT6392 PMIC
2026-09-02 19:40 UTC (3+ messages)
[PATCH v10 0/9] Add support for MT6392 PMIC
2026-09-02 19:25 UTC (10+ messages)
` [PATCH v10 1/9] dt-bindings: mfd: mt6397: Add "
` [PATCH v10 2/9] dt-bindings: input: mtk-pmic-keys: Add MT6392 PMIC keys
` [PATCH v10 3/9] regulator: dt-bindings: Add MediaTek MT6392 PMIC
` [PATCH v10 4/9] mfd: mt6397: Use MFD_CELL_* to describe sub-devices
` [PATCH v10 5/9] mfd: mt6397: Add support for MT6392 PMIC
` [PATCH v10 6/9] input: keyboard: mtk-pmic-keys: Add MT6392 support
` [PATCH v10 7/9] pinctrl: mediatek: mt6397: Add MediaTek MT6392
` [PATCH v10 8/9] regulator: Add MediaTek MT6392 regulator
` [PATCH v10 9/9] arm64: dts: mediatek: Add MediaTek MT6392 PMIC dtsi
[brgl:pinctrl-qcom:for-next] BUILD SUCCESS 6f168dea0db7bf35089a7fe942f1df6214464fcc
2026-09-02 18:57 UTC
[brgl:gpio:for-current] BUILD SUCCESS 1f1d0812f6a8ab8e6f709c599f137c99646512cc
2026-09-02 18:57 UTC
[PATCH v1 0/2] pinctrl: intel: retrieve pure platform driver data as well
2026-09-02 18:12 UTC (7+ messages)
` [PATCH v1 1/2] pinctrl: intel: Move intel_pinctrl_get_soc_data() upper in the code
` [PATCH v1 2/2] pinctrl: intel: Try to retrieve driver data for pure platform drivers
[brgl:gpio:for-next] BUILD SUCCESS 1900b5a41493e7050c68c1e62780d6fb9a209457
2026-09-02 17:39 UTC
[PATCH RFC 0/2] of: property: Make fw_devlink follow GPIO and PWM nexus maps
2026-09-02 16:55 UTC (6+ messages)
` [PATCH RFC 1/2] of: property: fw_devlink: Follow GPIO "
` [PATCH RFC 2/2] of: property: fw_devlink: Follow PWM "
[PATCH v2 0/2] Add pinctrl support for MSM8952
2026-09-02 16:11 UTC (10+ messages)
` [PATCH v2 2/2] pinctrl: qcom: Add MSM8952 tlmm pinctrl driver
[PATCH v2] gpiolib: of: Only apply the SPI CS quirk to SPI buses
2026-09-02 15:48 UTC (3+ messages)
[PATCH 0/5] PCI/pwrctrl: tc9563: introduce support for embedded GPIO controller
2026-09-02 14:12 UTC (8+ messages)
` [PATCH 1/5] dt-bindings: PCI: toshiba,tc9563: document "
` [PATCH 2/5] gpio: tc9563: add support for the "
` [PATCH 3/5] PCI/pwrctrl: tc9563: add GPIO auxiliary device support
` [PATCH 4/5] PCI/pwrctrl: tc9563: switch per-port reset to GPIO descriptor API
` [PATCH 5/5] arm64: dts: qcom: qcs6490-rb3gen2: enable TC9563 embedded GPIO controller
[PATCH v5 00/20] iio: adc: Add AD7768/AD7768-4 ADC driver support
2026-09-02 13:48 UTC (9+ messages)
` [PATCH v5 05/20] iio: adc: Add AD7768 and AD7768-4 core support
` [PATCH v5 17/20] gpio: regmap: Use regmap_test_bits() for single bit reads
[PATCH v3 00/10] Support ROHM BD73800
2026-09-02 13:24 UTC (14+ messages)
` [PATCH v3 01/10] dt-bindings: mfd: common ROHM PMIC properties
` [PATCH v3 02/10] dt-bindings: rohm,bd*: Ref common ROHM bindings
` [PATCH v3 03/10] dt-bindings: regulator: ROHM BD73800 regulators
` [PATCH v3 04/10] dt-bindings: mfd: ROHM BD73800 PMIC
` [PATCH v3 05/10] mfd: Support for ROHM BD73800 PMIC core
` [PATCH v3 06/10] rtc: bd70528: Support RTC on ROHM BD73800
` [PATCH v3 07/10] regulator: bd71828: Support "
` [PATCH v3 08/10] clk: bd718x7: "
` [PATCH v3 09/10] gpio: bd73800: Support ROHM BD73800 PMIC GPIOs
` [PATCH v3 10/10] MAINTAINERS: Add ROHM BD73800 PMIC files
[PATCH v4 0/2] gpio: realtek-otto: add pinctrl support
2026-09-02 13:02 UTC (6+ messages)
` [PATCH v4 1/2] dt-bindings: gpio: otto-gpio: Add gpio-ranges
` [PATCH v4 2/2] gpio: realtek-otto: add pinctrl support
[PATCH v4 0/7] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards
2026-09-02 12:58 UTC (10+ messages)
` [PATCH v4 1/7] dt-bindings: soc: "
` [PATCH v4 2/7] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow input-enable pinconf
` [PATCH v4 3/7] dt-bindings: usb: cypress,hx3: make peer-hub property optional
` [PATCH v4 4/7] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb
` [PATCH v4 5/7] arm64: dts: renesas: add support for solidrun rzv2l "
` [PATCH v4 6/7] arm64: dts: renesas: add support for solidrun rzg2lc "
` [PATCH v4 7/7] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay
[PATCH v2 0/2] gpio: mmio: report the line direction on chips without direction registers
2026-09-02 11:08 UTC (4+ messages)
` [PATCH v2 1/2] pinctrl: imx: answer OUTPUT_ENABLE/INPUT_ENABLE queries from the pad register
` [PATCH v2 2/2] gpio: mmio: track the direction of chips without direction registers
[PATCH v1 0/1] gpio: cdev: EOPNOTSUPP when HTE unavailable
2026-09-02 10:37 UTC (3+ messages)
` [PATCH v1 1/1] gpio: cdev: return EOPNOTSUPP when HTE is unavailable
[PATCH v5 0/6] Add Samsung Galaxy S4 support
2026-09-02 10:32 UTC (5+ messages)
` [PATCH v5 2/6] pinctrl: qcom: Register functions before enabling pinctrl
[PATCH 0/2] gpio: tegra186: Add support for Tegra268
2026-09-02 10:30 UTC (2+ messages)
[PATCH v5 00/15] Add initial support for Qualcomm Kuno SoC
2026-09-02 10:28 UTC (12+ messages)
` [PATCH v5 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v5 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v5 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
` (subset) [PATCH v5 00/15] Add initial support for Qualcomm "
[PATCH 0/2] pinctrl: qcom: Add PMAU0102 GPIO support
2026-09-02 10:24 UTC (2+ messages)
[PATCH v16 00/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers
2026-09-02 9:57 UTC (28+ messages)
` [PATCH v16 01/22] media: mc: Add INTERNAL pad flag
` [PATCH v16 02/22] dt-bindings: media: i2c: max96717: add support for I2C ATR
` [PATCH v16 03/22] dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf
` [PATCH v16 04/22] dt-bindings: media: i2c: max96717: add support for MAX9295A
` [PATCH v16 05/22] dt-bindings: media: i2c: max96717: add support for MAX96793
` [PATCH v16 06/22] dt-bindings: media: i2c: max96712: use pattern properties for ports
` [PATCH v16 07/22] dt-bindings: media: i2c: max96712: add support for I2C ATR
` [PATCH v16 08/22] dt-bindings: media: i2c: max96712: add support for POC supplies
` [PATCH v16 09/22] dt-bindings: media: i2c: max96712: add support for MAX96724F/R
` [PATCH v16 10/22] dt-bindings: media: i2c: max96712: add control-channel-port property
` [PATCH v16 11/22] dt-bindings: media: i2c: max96714: add support for MAX96714R
` [PATCH v16 12/22] dt-bindings: media: i2c: add MAX9296A, MAX96716A, MAX96792A
` [PATCH v16 13/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer framework
` [PATCH v16 14/22] media: i2c: add Maxim GMSL2/3 serializer framework
` [PATCH v16 15/22] media: i2c: add Maxim GMSL2/3 deserializer framework
` [PATCH v16 16/22] media: i2c: remove MAX96717 driver
` [PATCH v16 17/22] media: i2c: maxim-serdes: add "
` [PATCH v16 18/22] arm64: defconfig: disable deprecated MAX96712 driver
` [PATCH v16 19/22] staging: media: remove "
` [PATCH v16 20/22] media: i2c: maxim-serdes: add MAX96724 driver
` [PATCH v16 21/22] media: i2c: remove MAX96714 driver
` [PATCH v16 22/22] media: i2c: maxim-serdes: add MAX9296A driver
[PATCH 0/6] arm64: dts: qcom: Add support for Radxa Dragon Q8B
2026-09-02 9:31 UTC (10+ messages)
` [PATCH 1/6] PCI: of: Avoid config reads for disabled bridge nodes
` [PATCH 2/6] dt-bindings: display: bridge: simple: document Chrontel CH7218A
` [PATCH 3/6] drm/bridge: simple: add "
` [PATCH 4/6] dt-bindings: arm: qcom: document Radxa Dragon Q8B
` [PATCH 5/6] dt-bindings: pinctrl: qcom,sc8280xp-tlmm: allow gpio-line-names
` [PATCH 6/6] arm64: dts: qcom: sc8280xp: add Radxa Dragon Q8B
[PATCH v2] dt-bindings: pinctrl: fsl: Replace tabs with spaces
2026-09-02 8:23 UTC (2+ messages)
[PATCH 2/2] gpio: mmio: get the direction from pinctrl when there are no direction registers
2026-09-02 6:51 UTC
[PATCH 1/2] pinctrl: imx: answer OUTPUT_ENABLE/INPUT_ENABLE queries from the pad register
2026-09-02 6:51 UTC
[PATCH 0/2] gpio: mmio: read the line direction from pinctrl on chips without direction registers
2026-09-02 6:23 UTC (3+ messages)
` [PATCH 1/2] pinctrl: imx: answer OUTPUT_ENABLE/INPUT_ENABLE queries from the pad register
` [PATCH 2/2] gpio: mmio: get the direction from pinctrl when there are no direction registers
[PATCH v4] driver: fpga: xilinx-selectmap: add csi and rdwr support
2026-09-02 4:54 UTC (2+ messages)
[BUG] gpio: sloppy-logic-analyzer: trigger buffer leak and capture OOB race
2026-09-02 2:11 UTC
[PATCH 00/12] Add TH1520 USB support
2026-09-01 18:32 UTC (3+ messages)
` [PATCH 12/12] riscv: dts: thead: enable USB3 ports on Lichee Pi 4A
[PATCH v2 0/3] pinctrl: airoha: add EcoNet EN7528 pin controller support
2026-09-01 17:20 UTC (10+ messages)
` [PATCH v2 2/3] dt-bindings: pinctrl: Add EcoNet EN7528 pin controller
[PATCH v7 0/2] pinctrl: qcom: Add Hawi LPASS LPI pinctrl support
2026-09-01 16:02 UTC (2+ messages)
[PATCH] gpiolib: acpi: Add ignore_wake quirk for ASUS ZenBook UX425UA_UM425UA
2026-09-01 16:00 UTC (2+ messages)
[PATCH] gpiolib: of: don't mark hog nodes OF_POPULATED before a chip is found
2026-09-01 15:57 UTC (2+ messages)
[PATCH 1/4] gpio: realtek-otto: Handle errors from optional IRQ lookup
2026-09-01 15:55 UTC (2+ messages)
[PATCH v2 0/2] gpio: realtek-otto: make the driver work with SWAP_IO_SPACE
2026-09-01 15:55 UTC (2+ messages)
[PATCH] gpiolib: return quietly from gpiod_get_direction() without .get_direction()
2026-09-01 15:31 UTC (3+ messages)
[PATCH 00/13] HID: ft260: add UART and GPIO support, plus I2C fixes
2026-09-01 14:02 UTC (3+ messages)
[PATCH v8 0/6] rtc: s35390a: Allow use of output pin for interrupt signal 1 for wakealarm
2026-09-01 13:28 UTC (9+ messages)
` [PATCH v8 1/6] dt-bindings: rtc: Add pinctrl for S35390A
` [PATCH v8 2/6] rtc: s35390a: Add missing newline to dev_err
` [PATCH v8 3/6] rtc: s35390a: Fix alarm not disabling
` [PATCH v8 4/6] rtc: s35390a: Read 24-hour mode on access
` [PATCH v8 5/6] rtc: s35390a: Add pinctrl
` [PATCH v8 6/6] rtc: s35390a: Add synology quirk
[PATCH v2] pinctrl: qcom: nord: Split QUP1 SE2/SE3 into lane-pair functions
2026-09-01 9:48 UTC (2+ messages)
[PATCH 0/7] docs/abi: align userspace documentation with implementation
2026-09-01 8:25 UTC (10+ messages)
` [PATCH 1/7] docs: futex2: fix documented errno names for futex_waitv
` [PATCH 2/7] docs: landlock: fix ENOMSG condition in create_ruleset kernel-doc
` [PATCH 3/7] docs: gpio: note lineinfo padding must be zero filled
` [PATCH 4/7] docs: dma-buf-heaps: fix CMA heap name typo
` [PATCH 5/7] docs: vduse: align documentation with current uapi and driver
` [PATCH 6/7] docs: ioctl: fix stale NVMe registry entry and note N conflict
` [PATCH 7/7] gpio: cdev: return EOPNOTSUPP when HTE is unavailable
[PATCH v1 2/2] soc: starfive: Add JHB100 UART Routing driver
2026-09-01 1:38 UTC (2+ messages)
[PATCH v7 0/6] rtc: s35390a: Allow use of output pin for interrupt signal 1 for wakealarm
2026-08-31 16:47 UTC (3+ messages)
` [PATCH v7 1/6] dt-bindings: rtc: Add pinctrl for S35390A
[PATCH v3 0/9] Initial Apple Silicon M4 device trees and dt-bindings
2026-08-31 14:39 UTC (2+ messages)
[PATCH AUTOSEL 6.18] pinctrl: renesas: rzg2l: Add SR register cache for PM suspend/resume
2026-08-31 13:31 UTC (12+ messages)
` [PATCH AUTOSEL 6.18] pinctrl: qcom: Register functions before enabling pinctrl
` [PATCH AUTOSEL 6.18] pinctrl: mediatek: common-v1: bypass pinctrl GPIO layer in set GPIO direction
` [PATCH AUTOSEL 6.18] pinctrl: meson: amlogic-a4: use nolock get range
` [PATCH AUTOSEL 6.18] gpiolib: acpi: Add robust bounds-checking for GPIO pin resources
` [PATCH AUTOSEL 6.18] gpio: usbio: Add ACPI device-id for NVL platforms
` [PATCH AUTOSEL 6.18] pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction
` [PATCH AUTOSEL 6.18-6.12] pinctrl: renesas: rzg2l: Handle RZ/V2H(P) IOLH configuration in PM cache
` [PATCH AUTOSEL 6.18-5.10] gpio: pisosr: Read "ngpios" as u32
` [PATCH AUTOSEL 6.18-5.10] gpio: dwapb: Mask interrupts at hardware initialization
` [PATCH AUTOSEL 6.18-6.1] pinctrl: renesas: rzv2m: Use -ENOTSUPP instead of -EOPNOTSUPP
` [PATCH AUTOSEL 6.18] wifi: ath9k: Obtain system GPIOS from descriptors
[PATCH v15 00/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers
2026-08-31 13:37 UTC (4+ messages)
[PATCH v7 00/21] Add basic pinctrl drivers for JHB100 SoC
2026-08-31 11:35 UTC (2+ messages)
` [PATCH v7 20/21] pinctrl: starfive: Add StarFive JHB100 per3 controller driver
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox