From: Andy Shevchenko <andriy.shevchenko@intel.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>, Peng Fan <peng.fan@nxp.com>,
"open list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM..."
<linux-sound@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>,
"open list:GPIO
SUBSYSTEM:Keyword:(devm_)?gpio_(request|free|direction|get|set)"
<linux-gpio@vger.kernel.org>,
krzk@kernel.org
Subject: Re: [PATCH] ASoC: codec: ak5386: Convert to GPIO descriptors
Date: Fri, 28 Mar 2025 15:33:11 +0200 [thread overview]
Message-ID: <Z-alF-gK5TpGliCj@smile.fi.intel.com> (raw)
In-Reply-To: <20250328113918.1981069-1-peng.fan@oss.nxp.com>
On Fri, Mar 28, 2025 at 07:39:17PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> of_gpio.h is deprecated, update the driver to use GPIO descriptors.
> - Use dev_gpiod_get_optional to get GPIO descriptor.
devm
> - Use gpiod_set_value to configure output value.
>
> With legacy of_gpio API, the driver set gpio value 1 to power up
sets GPIO
> AK5386, and set value 0 to power down.
> Per datasheet for PDN(reset_gpio in the driver):
> Power Down & Reset Mode Pin
> “H”: Power up, “L”: Power down & Reset
> The AK5386 must be reset once upon power-up.
>
> There is no in-tree DTS using this codec, and the dt-bindings not
bindings does not
> specify polarity. Per driver and datasheet, the gpio polarity should be
GPIO
> active-high which is to power up the codec. So using GPIOD_OUT_LOW
> when get the GPIO descriptor matches GPIOF_OUT_INIT_LOW when using
> of_gpio API.
...
> The Documentation/devicetree/bindings/sound/ak5386.txt not specify
> polarity(this seems bug), so per code and datasheet, I think it
> should be active-high. I could add a quirk in gpiolib-of to force
> active-high or acitive-low if you think needed.
I don't think we need a quirk as long as the default is the same,
I mean if the DTS is written without setting polarity, would it be
active-high or active-low?
...
> + if (priv->reset_gpio)
Redundant as it duplicates the one in the below call.
> + gpiod_set_value(priv->reset_gpio, 1);
...
> + if (priv->reset_gpio)
Ditto.
> + gpiod_set_value(priv->reset_gpio, 0);
...
> + priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(priv->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
+ dev_printk.h // or even device.h, depending on the current code base
+ err.h
> + "Failed to get AK5386 reset GPIO\n");
> + gpiod_set_consumer_name(priv->reset_gpio, "AK5386 Reset");
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2025-03-28 13:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-28 11:39 [PATCH] ASoC: codec: ak5386: Convert to GPIO descriptors Peng Fan (OSS)
2025-03-28 13:33 ` Andy Shevchenko [this message]
2025-03-31 6:03 ` Peng Fan
2025-03-31 7:19 ` Andy Shevchenko
2025-03-31 11:54 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z-alF-gK5TpGliCj@smile.fi.intel.com \
--to=andriy.shevchenko@intel.com \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=krzk@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox