From: Krzysztof Kozlowski <krzk@kernel.org>
To: Pratap Nirujogi <pratap.nirujogi@amd.com>, linus.walleij@linaro.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
benjamin.chan@amd.com
Subject: Re: [PATCH] pinctrl: amd: isp411: Add amdisp GPIO pinctrl
Date: Sat, 1 Mar 2025 14:32:22 +0100 [thread overview]
Message-ID: <a2aceff9-5b44-405c-814a-0ad71da28168@kernel.org> (raw)
In-Reply-To: <20250228165749.3476210-1-pratap.nirujogi@amd.com>
On 28/02/2025 17:57, Pratap Nirujogi wrote:
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index fba1c56624c0..ac27e88677d1 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
> obj-$(CONFIG_OF) += devicetree.o
>
> obj-$(CONFIG_PINCTRL_AMD) += pinctrl-amd.o
> +obj-$(CONFIG_PINCTRL_AMDISP) += pinctrl-amdisp.o
> obj-$(CONFIG_PINCTRL_APPLE_GPIO) += pinctrl-apple-gpio.o
> obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o
> obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
> diff --git a/drivers/pinctrl/pinctrl-amdisp.c b/drivers/pinctrl/pinctrl-amdisp.c
> new file mode 100644
> index 000000000000..659406586cb2
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-amdisp.c
> @@ -0,0 +1,290 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright (C) 2025 Advanced Micro Devices, Inc. All rights reserved.
> + * All Rights Reserved.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the
> + * "Software"), to deal in the Software without restriction, including
> + * without limitation the rights to use, copy, modify, merge, publish,
> + * distribute, sub license, and/or sell copies of the Software, and to
> + * permit persons to whom the Software is furnished to do so, subject to
> + * the following conditions:
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
> + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
> + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
> + * USE OR OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * The above copyright notice and this permission notice (including the
> + * next paragraph) shall be included in all copies or substantial portions
> + * of the Software.
Same problems as with rest of AMD patches.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
Where do you use it?
> +#include <linux/platform_device.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/pinctrl/machine.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/interrupt.h>
Where do you use half of these headers?
> +#include "core.h"
> +#include "pinctrl-utils.h"
> +#include "pinctrl-amd.h"
> +#include "pinctrl-amdisp.h"
> +
> +#define DRV_NAME "amdisp-pinctrl"
> +#define GPIO_CONTROL_PIN 4
> +#define GPIO_OFFSET_0 0x0
> +#define GPIO_OFFSET_1 0x4
> +#define GPIO_OFFSET_2 0x50
...
> +static int amdisp_gpiochip_add(struct platform_device *pdev,
> + struct amdisp_pinctrl *pctrl)
> +{
> + struct gpio_chip *gc = &pctrl->gc;
> + struct pinctrl_gpio_range *grange = &pctrl->gpio_range;
> + int ret;
> +
> + gc->label = dev_name(pctrl->dev);
> + gc->owner = THIS_MODULE;
> + gc->parent = &pdev->dev;
> + gc->names = amdisp_range_pins_name;
> + gc->request = gpiochip_generic_request;
> + gc->free = gpiochip_generic_free;
> + gc->get_direction = amdisp_gpio_get_direction;
> + gc->direction_input = amdisp_gpio_direction_input;
> + gc->direction_output = amdisp_gpio_direction_output;
> + gc->get = amdisp_gpio_get;
> + gc->set = amdisp_gpio_set;
> + gc->set_config = amdisp_gpio_set_config;
> + gc->base = -1;
> + gc->ngpio = ARRAY_SIZE(amdisp_range_pins);
> +#if defined(CONFIG_OF_GPIO)
> + gc->of_node = pdev->dev.of_node;
> + gc->of_gpio_n_cells = 2;
> +#endif
> +
> + grange->id = 0;
> + grange->pin_base = 0;
> + grange->base = 0;
> + grange->pins = amdisp_range_pins;
> + grange->npins = ARRAY_SIZE(amdisp_range_pins);
> + grange->name = gc->label;
> + grange->gc = gc;
> +
> + ret = devm_gpiochip_add_data(&pdev->dev, gc, pctrl);
> + if (ret)
> + return ret;
> +
> + pinctrl_add_gpio_range(pctrl->pctrl, grange);
> +
> + dev_info(&pdev->dev, "register amdisp gpio controller\n");
Drop
> + return 0;
> +}
> +#endif
> +
> +static int amdisp_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct amdisp_pinctrl *pctrl;
> + struct resource *res;
> + int ret;
> +
> + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
> + if (!pctrl)
> + return -ENOMEM;
> +
> + pdev->dev.init_name = DRV_NAME;
> +#ifdef CONFIG_GPIOLIB
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (IS_ERR(res))
> + return PTR_ERR(res);
> +
> + pctrl->gpiobase = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(pctrl->gpiobase))
> + return PTR_ERR(pctrl->gpiobase);
> +#endif
> + platform_set_drvdata(pdev, pctrl);
> +
> + pctrl->dev = &pdev->dev;
> + pctrl->data = &amdisp_pinctrl_data;
> + pctrl->desc.owner = THIS_MODULE;
> + pctrl->desc.pctlops = &amdisp_pinctrl_ops;
> + pctrl->desc.pmxops = NULL;
> + pctrl->desc.name = dev_name(&pdev->dev);
> + pctrl->desc.pins = pctrl->data->pins;
> + pctrl->desc.npins = pctrl->data->npins;
> + ret = devm_pinctrl_register_and_init(&pdev->dev, &pctrl->desc,
> + pctrl, &pctrl->pctrl);
> + if (ret)
> + return ret;
> +
> + ret = pinctrl_enable(pctrl->pctrl);
> + if (ret)
> + return ret;
> +
> +#ifdef CONFIG_GPIOLIB
> + ret = amdisp_gpiochip_add(pdev, pctrl);
> + if (ret)
> + return ret;
> +#endif
> + dev_info(&pdev->dev, "amdisp pinctrl init successful\n");
Drop, useless. Not mentioning that drivers should be silent on success.
> + return 0;
> +}
> +
> +static struct platform_driver amdisp_pinctrl_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + },
> + .probe = amdisp_pinctrl_probe,
> +};
> +
> +static int __init amdisp_pinctrl_init(void)
> +{
> + return platform_driver_register(&amdisp_pinctrl_driver);
> +}
> +arch_initcall(amdisp_pinctrl_init);
> +
> +static void __exit amdisp_pinctrl_exit(void)
> +{
> + platform_driver_unregister(&amdisp_pinctrl_driver);
> +}
> +module_exit(amdisp_pinctrl_exit);
> +
> +MODULE_AUTHOR("Benjamin Chan <benjamin.chan@amd.com>");
> +MODULE_AUTHOR("Pratap Nirujogi <pratap.nirujogi@amd.com>");
> +MODULE_DESCRIPTION("AMDISP pinctrl driver");
> +MODULE_LICENSE("GPL and additional rights");
No, that's not true. Just like in other patch...
> +MODULE_ALIAS("platform:" DRV_NAME);
Best regards,
Krzysztof
next prev parent reply other threads:[~2025-03-01 13:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-28 16:57 [PATCH] pinctrl: amd: isp411: Add amdisp GPIO pinctrl Pratap Nirujogi
2025-03-01 13:32 ` Krzysztof Kozlowski [this message]
2025-03-04 23:22 ` Nirujogi, Pratap
2025-03-01 22:08 ` kernel test robot
2025-03-02 1:22 ` kernel test robot
2025-03-02 3:42 ` kernel test robot
2025-03-04 8:34 ` Linus Walleij
2025-03-04 23:22 ` Nirujogi, Pratap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a2aceff9-5b44-405c-814a-0ad71da28168@kernel.org \
--to=krzk@kernel.org \
--cc=benjamin.chan@amd.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pratap.nirujogi@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox