[PATCH v2 0/9] MIPS: TXX9: Legacy GPIO interfaces cleanup

[PATCH v2 0/9] MIPS: TXX9: Legacy GPIO interfaces cleanup

[Geert Uytterhoeven]

	Hi all,

This patch series gets rid of legacy GPIO interface usage on the MIPS
RBTX4927 development board, preceded and followed by some cleanups.
No blinky LEDs were harmed during the production of this series.

Changes compared to v1[1]:
  - Add Reviewed-by,
  - Return early on platform_device_add() failure.

Thanks for your comments!

[1] "[PATCH 0/9] MIPS: TXX9: Legacy GPIO interfaces cleanup"
    https://lore.kernel.org/cover.1782389357.git.geert@linux-m68k.org

Geert Uytterhoeven (9):
  MIPS: TXX9: Remove tx4938_spi_init() and txx9_spi_init()
  MIPS: TXX9: Remove txx9_7segled_*() forward declarations
  MIPS: TXX9: rbtx4927: Use GPIO lookup table for SIO DTR
  MIPS: TXX9: rbtx4927: Use GPIO lookup table for TXx9 LEDs
  MIPS: TXX9: Reduce TXX9_IOCLED_MAXLEDS to 3
  MIPS: TXX9: Use GPIO lookup table for iocled LEDs
  MIPS: TXX9: Drop GPIOLIB_LEGACY select
  MIPS: TXX9: Convert gpio_txx9 to dynamic GPIO base allocation
  MIPS: TXX9: Clean up txx9_iocled_init()

 arch/mips/include/asm/txx9/generic.h  |  9 +-----
 arch/mips/include/asm/txx9/tx4938.h   |  1 -
 arch/mips/include/asm/txx9pio.h       |  3 +-
 arch/mips/kernel/gpio_txx9.c          |  5 ++-
 arch/mips/txx9/Kconfig                |  1 -
 arch/mips/txx9/generic/setup.c        | 45 ++++++++++-----------------
 arch/mips/txx9/generic/setup_tx4938.c |  6 ----
 arch/mips/txx9/rbtx4927/setup.c       | 41 ++++++++++++++++++------
 8 files changed, 53 insertions(+), 58 deletions(-)

-- 
2.43.0

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH v2 1/9] MIPS: TXX9: Remove tx4938_spi_init() and txx9_spi_init()

[Geert Uytterhoeven]

The last user of tx4938_spi_init() was removed in commit
21d638ef9483d8cf ("MIPS: TXX9: Remove rbtx4938 board support").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/include/asm/txx9/generic.h  |  1 -
 arch/mips/include/asm/txx9/tx4938.h   |  1 -
 arch/mips/txx9/generic/setup.c        | 17 -----------------
 arch/mips/txx9/generic/setup_tx4938.c |  6 ------
 4 files changed, 25 deletions(-)

diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
index 9a2c47bf3c4045e7..3813ab9ccf717ada 100644
--- a/arch/mips/include/asm/txx9/generic.h
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -45,7 +45,6 @@ extern int (*txx9_irq_dispatch)(int pending);
 const char *prom_getenv(const char *name);
 void txx9_wdt_init(unsigned long base);
 void txx9_wdt_now(unsigned long base);
-void txx9_spi_init(int busid, unsigned long base, int irq);
 void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
 void txx9_sio_init(unsigned long baseaddr, int irq,
 		   unsigned int line, unsigned int sclk, int nocts);
diff --git a/arch/mips/include/asm/txx9/tx4938.h b/arch/mips/include/asm/txx9/tx4938.h
index 6ca767ee6467ca88..765f7d6a44d36ee6 100644
--- a/arch/mips/include/asm/txx9/tx4938.h
+++ b/arch/mips/include/asm/txx9/tx4938.h
@@ -281,7 +281,6 @@ void tx4938_wdt_init(void);
 void tx4938_setup(void);
 void tx4938_time_init(unsigned int tmrnr);
 void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
-void tx4938_spi_init(int busid);
 void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 6c5025806914f989..97102d3327d22828 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -341,23 +341,6 @@ void txx9_wdt_now(unsigned long base)
 		     &tmrptr->tcr);
 }
 
-/* SPI support */
-void __init txx9_spi_init(int busid, unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", busid,
-					res, ARRAY_SIZE(res));
-}
-
 void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
 {
 	struct platform_device *pdev =
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index ba646548c5f694bd..bfd6540f8f6a406b 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -301,12 +301,6 @@ void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
 	}
 }
 
-void __init tx4938_spi_init(int busid)
-{
-	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
-		      TXX9_IRQ_BASE + TX4938_IR_SPI);
-}
-
 void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
 {
 	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
-- 
2.43.0

[PATCH v2 2/9] MIPS: TXX9: Remove txx9_7segled_*() forward declarations

[Geert Uytterhoeven]

The actual implementation was removed in commit 5a8df9281b052ff3 ("MIPS:
TXX9: Remove rbtx4939 board support").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/include/asm/txx9/generic.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
index 3813ab9ccf717ada..5ce5b8579a444ec3 100644
--- a/arch/mips/include/asm/txx9/generic.h
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -83,11 +83,6 @@ void txx9_iocled_init(unsigned long baseaddr,
 		      int basenum, unsigned int num, int lowactive,
 		      const char *color, char **deftriggers);
 
-/* 7SEG LED */
-void txx9_7segled_init(unsigned int num,
-		       void (*putc)(unsigned int pos, unsigned char val));
-int txx9_7segled_putc(unsigned int pos, char c);
-
 void __init txx9_aclc_init(unsigned long baseaddr, int irq,
 			   unsigned int dmac_id,
 			   unsigned int dma_chan_out,
-- 
2.43.0

[PATCH v2 3/9] MIPS: TXX9: rbtx4927: Use GPIO lookup table for SIO DTR

[Geert Uytterhoeven]

Convert SIO DTR handling from legacy GPIO calls to GPIO descriptors
using a GPIO lookup table.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/txx9/rbtx4927/setup.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 31955c1d55550fd4..e57c409c318ca220 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -49,6 +49,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/leds.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
@@ -157,11 +158,20 @@ static inline void tx4927_pci_setup(void) {}
 static inline void tx4937_pci_setup(void) {}
 #endif /* CONFIG_PCI */
 
+/* TX4927-SIO DTR on (PIO[15]) */
+GPIO_LOOKUP_SINGLE(sio_gpio_table, NULL, "TXx9", 15, "sio-dtr",
+		   GPIO_ACTIVE_HIGH);
+
 static void __init rbtx4927_gpio_init(void)
 {
-	/* TX4927-SIO DTR on (PIO[15]) */
-	gpio_request(15, "sio-dtr");
-	gpio_direction_output(15, 1);
+	struct gpio_desc *d;
+
+	gpiod_add_lookup_table(&sio_gpio_table);
+	d = gpiod_get(NULL, "sio-dtr", GPIOD_OUT_HIGH);
+	if (IS_ERR(d))
+		pr_err("Unable to get sio-dtr GPIO descriptor\n");
+	else
+		gpiod_put(d);
 
 	tx4927_sio_init(0, 0);
 }
-- 
2.43.0

[PATCH v2 4/9] MIPS: TXX9: rbtx4927: Use GPIO lookup table for TXx9 LEDs

[Geert Uytterhoeven]

Convert TXx9 LED description from legacy GPIO numbers to GPIO
descriptors using a GPIO lookup table.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by,
  - Return early on platform_device_add() failure.
---
 arch/mips/txx9/rbtx4927/setup.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index e57c409c318ca220..75674b4cc91d7207 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -327,11 +327,19 @@ static void __init rbtx4927_mtd_init(void)
 		tx4927_mtd_init(i);
 }
 
+static struct gpiod_lookup_table rbtx4927_gpioled_table = {
+	.table = {
+		GPIO_LOOKUP_IDX("TXx9", 0, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("TXx9", 1, NULL, 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init rbtx4927_gpioled_init(void)
 {
 	static const struct gpio_led leds[] = {
-		{ .name = "gpioled:green:0", .gpio = 0, .active_low = 1, },
-		{ .name = "gpioled:green:1", .gpio = 1, .active_low = 1, },
+		{ .name = "gpioled:green:0", },
+		{ .name = "gpioled:green:1", },
 	};
 	static struct gpio_led_platform_data pdata = {
 		.num_leds = ARRAY_SIZE(leds),
@@ -342,8 +350,13 @@ static void __init rbtx4927_gpioled_init(void)
 	if (!pdev)
 		return;
 	pdev->dev.platform_data = &pdata;
-	if (platform_device_add(pdev))
+	if (platform_device_add(pdev)) {
 		platform_device_put(pdev);
+		return;
+	}
+
+	rbtx4927_gpioled_table.dev_id = dev_name(&pdev->dev);
+	gpiod_add_lookup_table(&rbtx4927_gpioled_table);
 }
 
 static void __init rbtx4927_device_init(void)
-- 
2.43.0

Re: [PATCH v2 4/9] MIPS: TXX9: rbtx4927: Use GPIO lookup table for TXx9 LEDs

[Philippe Mathieu-Daudé]

On 1/7/26 12:11, Geert Uytterhoeven wrote:
> Convert TXx9 LED description from legacy GPIO numbers to GPIO
> descriptors using a GPIO lookup table.
> 
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Reviewed-by: Linus Walleij <linusw@kernel.org>
> ---
> v2:
>    - Add Reviewed-by,
>    - Return early on platform_device_add() failure.
> ---
>   arch/mips/txx9/rbtx4927/setup.c | 19 ++++++++++++++++---
>   1 file changed, 16 insertions(+), 3 deletions(-)

Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>

[PATCH v2 5/9] MIPS: TXX9: Reduce TXX9_IOCLED_MAXLEDS to 3

[Geert Uytterhoeven]

The number of available GPIOs and LEDs on the TXx9 IOC FPGA depends on
the platform.  Since commit 455481fc9a807798 ("MIPS: Remove TX39XX
support"), the only remaining platform (rbtx4927) supports just three.
Hence reduce the maximum number, to reduce allocation size.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/txx9/generic/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 97102d3327d22828..611ccbe429cfe7e1 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -569,7 +569,7 @@ void __init txx9_ndfmc_init(unsigned long baseaddr,
 #if IS_ENABLED(CONFIG_LEDS_GPIO)
 static DEFINE_SPINLOCK(txx9_iocled_lock);
 
-#define TXX9_IOCLED_MAXLEDS 8
+#define TXX9_IOCLED_MAXLEDS 3	/* rbtx4927 */
 
 struct txx9_iocled_data {
 	struct gpio_chip chip;
-- 
2.43.0

[PATCH v2 6/9] MIPS: TXX9: Use GPIO lookup table for iocled LEDs

[Geert Uytterhoeven]

Convert iocled LED description from legacy GPIO numbers to GPIO
descriptors using a GPIO lookup table.

For now, just ignore the "lowactive" parameter, and force
GPIO_ACTIVE_LOW, as that is what the sole caller wants.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/txx9/generic/setup.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 611ccbe429cfe7e1..32246f5f78f5070c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -19,6 +19,7 @@
 #include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/txx9/ndfmc.h>
 #include <linux/serial_core.h>
@@ -615,6 +616,15 @@ static int txx9_iocled_dir_out(struct gpio_chip *chip, unsigned int offset,
 	return 0;
 }
 
+static struct gpiod_lookup_table txx9_iocled_table = {
+	.table = {
+		GPIO_LOOKUP_IDX("iocled", 0, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("iocled", 1, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("iocled", 2, NULL, 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 void __init txx9_iocled_init(unsigned long baseaddr,
 			     int basenum, unsigned int num, int lowactive,
 			     const char *color, char **deftriggers)
@@ -659,14 +669,14 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 		snprintf(iocled->names[i], sizeof(iocled->names[i]),
 			 "iocled:%s:%u", color, i);
 		led->name = iocled->names[i];
-		led->gpio = basenum + i;
-		led->active_low = lowactive;
 		if (deftriggers && *deftriggers)
 			led->default_trigger = *deftriggers++;
 	}
 	pdev->dev.platform_data = &iocled->pdata;
 	if (platform_device_add(pdev))
 		goto out_pdev;
+	txx9_iocled_table.dev_id = dev_name(&pdev->dev);
+	gpiod_add_lookup_table(&txx9_iocled_table);
 	return;
 
 out_pdev:
-- 
2.43.0

Re: [PATCH v2 6/9] MIPS: TXX9: Use GPIO lookup table for iocled LEDs

[Philippe Mathieu-Daudé]

On 1/7/26 12:11, Geert Uytterhoeven wrote:
> Convert iocled LED description from legacy GPIO numbers to GPIO
> descriptors using a GPIO lookup table.
> 
> For now, just ignore the "lowactive" parameter, and force
> GPIO_ACTIVE_LOW, as that is what the sole caller wants.
> 
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Reviewed-by: Linus Walleij <linusw@kernel.org>
> ---
> v2:
>    - Add Reviewed-by.
> ---
>   arch/mips/txx9/generic/setup.c | 14 ++++++++++++--
>   1 file changed, 12 insertions(+), 2 deletions(-)

Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>

[PATCH v2 7/9] MIPS: TXX9: Drop GPIOLIB_LEGACY select

[Geert Uytterhoeven]

TXx has been converted away from the old-style gpiolib interfaces.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/txx9/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 92b759a434c0eedf..7335efa4d52801dc 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -37,7 +37,6 @@ config SOC_TX4927
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
-	select GPIOLIB_LEGACY
 
 config SOC_TX4938
 	bool
-- 
2.43.0

[PATCH v2 8/9] MIPS: TXX9: Convert gpio_txx9 to dynamic GPIO base allocation

[Geert Uytterhoeven]

Static allocation of GPIO base is deprecated, use dynamic allocation.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/include/asm/txx9pio.h | 3 +--
 arch/mips/kernel/gpio_txx9.c    | 5 ++---
 arch/mips/txx9/rbtx4927/setup.c | 4 ++--
 3 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/mips/include/asm/txx9pio.h b/arch/mips/include/asm/txx9pio.h
index 3d6fa9f8d5135411..c33a977244005479 100644
--- a/arch/mips/include/asm/txx9pio.h
+++ b/arch/mips/include/asm/txx9pio.h
@@ -23,7 +23,6 @@ struct txx9_pio_reg {
 	__u32 maskext;
 };
 
-int txx9_gpio_init(unsigned long baseaddr,
-		   unsigned int base, unsigned int num);
+int txx9_gpio_init(unsigned long baseaddr, unsigned int num);
 
 #endif /* __ASM_TXX9PIO_H */
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index 96ac40d20c238018..b2e73263d94c8419 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -76,13 +76,12 @@ static struct gpio_chip txx9_gpio_chip = {
 	.label = "TXx9",
 };
 
-int __init txx9_gpio_init(unsigned long baseaddr,
-			  unsigned int base, unsigned int num)
+int __init txx9_gpio_init(unsigned long baseaddr, unsigned int num)
 {
 	txx9_pioptr = ioremap(baseaddr, sizeof(struct txx9_pio_reg));
 	if (!txx9_pioptr)
 		return -ENODEV;
-	txx9_gpio_chip.base = base;
+	txx9_gpio_chip.base = -1;
 	txx9_gpio_chip.ngpio = num;
 	return gpiochip_add_data(&txx9_gpio_chip, NULL);
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index 75674b4cc91d7207..e904217a5fb20102 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -178,7 +178,7 @@ static void __init rbtx4927_gpio_init(void)
 
 static void __init rbtx4927_arch_init(void)
 {
-	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, TX4927_NUM_PIO);
 
 	rbtx4927_gpio_init();
 
@@ -187,7 +187,7 @@ static void __init rbtx4927_arch_init(void)
 
 static void __init rbtx4937_arch_init(void)
 {
-	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, TX4938_NUM_PIO);
 
 	rbtx4927_gpio_init();
 
-- 
2.43.0

[PATCH v2 9/9] MIPS: TXX9: Clean up txx9_iocled_init()

[Geert Uytterhoeven]

The sole caller already uses dynamic GPIO base allocation, so drop
support for static allocation.
While at it, drop the no longer used "lowactive" parameter.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
v2:
  - Add Reviewed-by.
---
 arch/mips/include/asm/txx9/generic.h |  3 +--
 arch/mips/txx9/generic/setup.c       | 12 ++++--------
 arch/mips/txx9/rbtx4927/setup.c      |  2 +-
 3 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h
index 5ce5b8579a444ec3..653315fb6ca559a7 100644
--- a/arch/mips/include/asm/txx9/generic.h
+++ b/arch/mips/include/asm/txx9/generic.h
@@ -79,8 +79,7 @@ static inline unsigned int __fls8(unsigned char x)
 	return r;
 }
 
-void txx9_iocled_init(unsigned long baseaddr,
-		      int basenum, unsigned int num, int lowactive,
+void txx9_iocled_init(unsigned long baseaddr, unsigned int num,
 		      const char *color, char **deftriggers);
 
 void __init txx9_aclc_init(unsigned long baseaddr, int irq,
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 32246f5f78f5070c..5f66236038c8f468 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -625,8 +625,7 @@ static struct gpiod_lookup_table txx9_iocled_table = {
 	},
 };
 
-void __init txx9_iocled_init(unsigned long baseaddr,
-			     int basenum, unsigned int num, int lowactive,
+void __init txx9_iocled_init(unsigned long baseaddr, unsigned int num,
 			     const char *color, char **deftriggers)
 {
 	struct txx9_iocled_data *iocled;
@@ -652,14 +651,12 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	iocled->chip.direction_input = txx9_iocled_dir_in;
 	iocled->chip.direction_output = txx9_iocled_dir_out;
 	iocled->chip.label = "iocled";
-	iocled->chip.base = basenum;
+	iocled->chip.base = -1;
 	iocled->chip.ngpio = num;
 	if (gpiochip_add_data(&iocled->chip, iocled))
 		goto out_unmap;
-	if (basenum < 0)
-		basenum = iocled->chip.base;
 
-	pdev = platform_device_alloc("leds-gpio", basenum);
+	pdev = platform_device_alloc("leds-gpio", iocled->chip.base);
 	if (!pdev)
 		goto out_gpio;
 	iocled->pdata.num_leds = num;
@@ -689,8 +686,7 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	kfree(iocled);
 }
 #else /* CONFIG_LEDS_GPIO */
-void __init txx9_iocled_init(unsigned long baseaddr,
-			     int basenum, unsigned int num, int lowactive,
+void __init txx9_iocled_init(unsigned long baseaddr, unsigned int num,
 			     const char *color, char **deftriggers)
 {
 }
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
index e904217a5fb20102..223889c031866ca3 100644
--- a/arch/mips/txx9/rbtx4927/setup.c
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -373,7 +373,7 @@ static void __init rbtx4927_device_init(void)
 		tx4938_aclc_init();
 	}
 	platform_device_register_simple("txx9aclc-generic", -1, NULL, 0);
-	txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, -1, 3, 1, "green", NULL);
+	txx9_iocled_init(RBTX4927_LED_ADDR - IO_BASE, 3, "green", NULL);
 	rbtx4927_gpioled_init();
 }
 
-- 
2.43.0