[PATCH v3 0/7] drm/vc4: Fixup DT and DT binding issues from recent patchset

[PATCH v3 0/7] drm/vc4: Fixup DT and DT binding issues from recent patchset

[Dave Stevenson]

I missed the DT errors from the recent patchset[1] (DT patches
in linux-next via Florian, DRM bindings patches on dri-misc-next)
as Rob's bot report got spam filtered, so this is a fixup set.

Largely it was changes to number of interrupts or clocks in the
bindings, so those are now covered.

I've fixed up the missing "interrupt-controller" flags for 2711
and 2712 whilst here.

I can't get my head around what is meant to happen with ranges:
"soc@107c000000: firmware: 'ranges' is a required property"
The meaning seems obvious.

However if I add it then I get:
"firmware: '#address-cells', '#size-cells', 'dma-ranges', 'ranges' do
not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#

There's obviously some other flag I need to set in the bindings,
but I can't work it out. We have similar errors for all the Pi
platforms for one or more nodes.
Please advise and I'll happily fix them all.

Thanks
  Dave

[1] https://lore.kernel.org/linux-arm-kernel/20241025-drm-vc4-2712-support-v2-0-35efa83c8fc0@raspberrypi.com/

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
Changes in v3:
- Fixed up indentation on 1/7. (I fixed it once, but obviously reworked
  things and lost it).
- Link to v2: https://lore.kernel.org/r/20241212-dt-bcm2712-fixes-v2-0-35986e04d0f4@raspberrypi.com

Thanks to Stefan and Krzysztof for their reviews.
Hopefully I've addressed all points raised in the correct manner.

Changes in v2:
- Commits have now be merged from drm-misc-next to linux-next, so all
  commit hashes are valid on linux-next.
- 1/7 Removed references to "previous commit". Fixed up indentation.
  Added maxItems
- 2/7 Defined widest constraints
- 3/7 Added maxItems and removed reference to Linux
- 4/7 Described the errors. Split into two for fix of node name vs addr
  being wrong.
- Added new patch removing "required" for interrupt-controller and
  interrupt-cells for bcm2836-l1-intc
- 5/7 (now 7/7) Removed the intc node for 2712 - it's irrelevant on 64bit systems
- 6/7 dropped as updating the binding is the correct answer
- 7/7 dropped. simple-bus claims ranges is required, but adding it
  creates other errors. I'm unclear as to the right solution.

- Link to v1: https://lore.kernel.org/r/20241202-dt-bcm2712-fixes-v1-0-fac67cc2f98a@raspberrypi.com

---
Dave Stevenson (7):
      dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
      dt-bindings: display: Fix BCM2835 HVS bindings for BCM2712
      dt-bindings: gpio: brcmstb: permit gpio-line-names property
      dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
      arm64: dts: broadcom: Rename bcm2712 interrupt controllers
      arm64: dts: broadcom: Correct hdmi device node names
      arm64: dts: broadcom: Remove intc controller on BCM2712.

 .../bindings/display/brcm,bcm2711-hdmi.yaml        | 107 ++++++++++++++++++---
 .../bindings/display/brcm,bcm2835-hvs.yaml         |  83 +++++++++++++---
 .../bindings/gpio/brcm,brcmstb-gpio.yaml           |   4 +
 .../interrupt-controller/brcm,bcm2836-l1-intc.yaml |   2 -
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi          |  13 +--
 5 files changed, 170 insertions(+), 39 deletions(-)
---
base-commit: 3a6b7ba51f16c093420959ab2bd3476d180547fa
change-id: 20241128-dt-bcm2712-fixes-afb0e8a0a476

Best regards,
-- 
Dave Stevenson <dave.stevenson@raspberrypi.com>

[PATCH v3 1/7] dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712

[Dave Stevenson]

Commit 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
added the compatible strings for BCM2712, but missed out that the
number of interrupts changed.

Update the schema to include the interrupt requirements.

Fixes: 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 .../bindings/display/brcm,bcm2711-hdmi.yaml        | 107 ++++++++++++++++++---
 1 file changed, 93 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index 6d11f5955b51..dd7dea60183b 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -56,22 +56,38 @@ properties:
       - const: cec
 
   interrupts:
-    items:
-      - description: CEC TX interrupt
-      - description: CEC RX interrupt
-      - description: CEC stuck at low interrupt
-      - description: Wake-up interrupt
-      - description: Hotplug connected interrupt
-      - description: Hotplug removed interrupt
+    oneOf:
+      - items:
+          - description: CEC TX interrupt
+          - description: CEC RX interrupt
+          - description: CEC stuck at low interrupt
+          - description: Wake-up interrupt
+          - description: Hotplug connected interrupt
+          - description: Hotplug removed interrupt
+
+      - items:
+          - description: CEC TX interrupt
+          - description: CEC RX interrupt
+          - description: CEC stuck at low interrupt
+          - description: Hotplug connected interrupt
+          - description: Hotplug removed interrupt
 
   interrupt-names:
-    items:
-      - const: cec-tx
-      - const: cec-rx
-      - const: cec-low
-      - const: wakeup
-      - const: hpd-connected
-      - const: hpd-removed
+    oneOf:
+      - items:
+          - const: cec-tx
+          - const: cec-rx
+          - const: cec-low
+          - const: wakeup
+          - const: hpd-connected
+          - const: hpd-removed
+
+      - items:
+          - const: cec-tx
+          - const: cec-rx
+          - const: cec-low
+          - const: hpd-connected
+          - const: hpd-removed
 
   ddc:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -112,6 +128,66 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2711-hdmi0
+              - brcm,bcm2711-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Wake-up interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupt-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: wakeup
+            - const: hpd-connected
+            - const: hpd-removed
+
+
+      required:
+        - interrupts
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2712-hdmi0
+              - brcm,bcm2712-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupts-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: hpd-connected
+            - const: hpd-removed
+
+      required:
+        - interrupts
+        - interrupt-names
+
 examples:
   - |
     hdmi0: hdmi@7ef00700 {
@@ -136,6 +212,9 @@ examples:
                     "hd";
         clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
         clock-names = "hdmi", "bvb", "audio", "cec";
+        interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+        interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup",
+                "hpd-connected", "hpd-removed";
         resets = <&dvp 0>;
         ddc = <&ddc0>;
     };

-- 
2.34.1

Re: [PATCH v3 1/7] dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712

[Krzysztof Kozlowski]

On Thu, Dec 12, 2024 at 06:36:28PM +0000, Dave Stevenson wrote:
> Commit 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
> added the compatible strings for BCM2712, but missed out that the
> number of interrupts changed.
> 
> Update the schema to include the interrupt requirements.
> 
> Fixes: 62948c62abca ("dt-bindings: display: Add BCM2712 HDMI bindings")
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
>  .../bindings/display/brcm,bcm2711-hdmi.yaml        | 107 ++++++++++++++++++---
>  1 file changed, 93 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> index 6d11f5955b51..dd7dea60183b 100644
> --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
> @@ -56,22 +56,38 @@ properties:
>        - const: cec
>  
>    interrupts:

> -    items:
> -      - description: CEC TX interrupt
> -      - description: CEC RX interrupt
> -      - description: CEC stuck at low interrupt
> -      - description: Wake-up interrupt
> -      - description: Hotplug connected interrupt
> -      - description: Hotplug removed interrupt
> +    oneOf:
> +      - items:
> +          - description: CEC TX interrupt
> +          - description: CEC RX interrupt
> +          - description: CEC stuck at low interrupt
> +          - description: Wake-up interrupt
> +          - description: Hotplug connected interrupt
> +          - description: Hotplug removed interrupt
> +
> +      - items:
> +          - description: CEC TX interrupt
> +          - description: CEC RX interrupt
> +          - description: CEC stuck at low interrupt
> +          - description: Hotplug connected interrupt
> +          - description: Hotplug removed interrupt

You have chosen unusual syntax. There are no bindings doing this way, so
I really do not get which file you used as template.

Expected here are minItems and maxItems. These are the widest
constraints. Otherwise you are repeating the same in allOf:if:then. And
then the allOf:if:then: defines the items.

You can do the opposite - define the items here then just choose
constraints in if:then:. Less popular if you have list without common
part (so no minItems here), but sure, if you insist... yet you chosen
some third way of duplicating it in both places.

Look:
https://elixir.bootlin.com/linux/v6.11-rc6/source/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml#L127
https://elixir.bootlin.com/linux/v6.11-rc6/source/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml#L39
https://elixir.bootlin.com/linux/v5.19/source/Documentation/devicetree/bindings/example-schema.yaml#L91

There is nowhere syntax like here, with duplicating everything twice.

BTW, drop the full stop from your subjects in some other patches.
Subject never ends with full stop.


Best regards,
Krzysztof

[PATCH v3 2/7] dt-bindings: display: Fix BCM2835 HVS bindings for BCM2712

[Dave Stevenson]

Commit 6cfcbe548a3a ("dt-bindings: display: Add BCM2712 HVS bindings")
added the compatible string for BCM2712, but missed out that
the number of interrupts and clocks changed too.

Update to validate clock and interrupts for the variants.

Fixes: 6cfcbe548a3a ("dt-bindings: display: Add BCM2712 HVS bindings")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 .../bindings/display/brcm,bcm2835-hvs.yaml         | 83 ++++++++++++++++++----
 1 file changed, 69 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
index f91c9dce2a44..36bf8eec88a6 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
@@ -20,11 +20,20 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
 
   clocks:
-    maxItems: 1
-    description: Core Clock
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -33,17 +42,63 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - brcm,bcm2711-hvs
-          - brcm,bcm2712-hvs
-
-then:
-  required:
-    - clocks
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2711-hvs
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Core Clock
+        interrupts:
+          maxItems: 1
+
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2712-hvs
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: core
+            - const: disp
+        interrupts:
+          items:
+            - description: Channel 0 End of frame
+            - description: Channel 1 End of frame
+            - description: Channel 2 End of frame
+        interrupt-names:
+          items:
+            - const: ch0-eof
+            - const: ch1-eof
+            - const: ch2-eof
+      required:
+        - clocks
+        - clock-names
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2835-hvs
+
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
 
 examples:
   - |

-- 
2.34.1

Re: [PATCH v3 2/7] dt-bindings: display: Fix BCM2835 HVS bindings for BCM2712

[Krzysztof Kozlowski]

On Thu, Dec 12, 2024 at 06:36:29PM +0000, Dave Stevenson wrote:
> Commit 6cfcbe548a3a ("dt-bindings: display: Add BCM2712 HVS bindings")
> added the compatible string for BCM2712, but missed out that
> the number of interrupts and clocks changed too.
> 
> Update to validate clock and interrupts for the variants.
> 
> Fixes: 6cfcbe548a3a ("dt-bindings: display: Add BCM2712 HVS bindings")
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
>  .../bindings/display/brcm,bcm2835-hvs.yaml         | 83 ++++++++++++++++++----
>  1 file changed, 69 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
> index f91c9dce2a44..36bf8eec88a6 100644
> --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
> +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
> @@ -20,11 +20,20 @@ properties:
>      maxItems: 1
>  
>    interrupts:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 3
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 3
>  
>    clocks:
> -    maxItems: 1
> -    description: Core Clock
> +    minItems: 1
> +    maxItems: 2
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 2
>  
>  required:
>    - compatible
> @@ -33,17 +42,63 @@ required:
>  
>  additionalProperties: false
>  
> -if:
> -  properties:
> -    compatible:
> -      contains:
> -        enum:
> -          - brcm,bcm2711-hvs
> -          - brcm,bcm2712-hvs
> -
> -then:
> -  required:
> -    - clocks
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: brcm,bcm2711-hvs
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: Core Clock
> +        interrupts:
> +          maxItems: 1
> +
> +      required:
> +        - clocks
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: brcm,bcm2712-hvs
> +
> +    then:
> +      properties:
> +        clocks:

minItems: 2

> +          maxItems: 2
> +        clock-names:
> +          items:
> +            - const: core
> +            - const: disp
> +        interrupts:
> +          items:
> +            - description: Channel 0 End of frame
> +            - description: Channel 1 End of frame
> +            - description: Channel 2 End of frame
> +        interrupt-names:
> +          items:
> +            - const: ch0-eof
> +            - const: ch1-eof
> +            - const: ch2-eof
> +      required:
> +        - clocks
> +        - clock-names
> +        - interrupt-names

Why requiring last two names? Commit msg does not explain that.

Best regards,
Krzysztof

[PATCH v3 3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property

[Dave Stevenson]

gpio-line-names is a generic property that can be supported by any
GPIO controller, so permit it through the binding.

It is permitted to have a variable number of GPIOs per node based
on brcm,gpio-bank-widths, so define an arbitrary maximum number of
items based on current users.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
index f096f286da19..fbd69b4cecc7 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -64,6 +64,10 @@ properties:
 
   gpio-ranges: true
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 128
+
   wakeup-source:
     type: boolean
     description: >

-- 
2.34.1

Re: [PATCH v3 3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property

[Florian Fainelli]

On 12/12/24 10:36, Dave Stevenson wrote:
> gpio-line-names is a generic property that can be supported by any
> GPIO controller, so permit it through the binding.
> 
> It is permitted to have a variable number of GPIOs per node based
> on brcm,gpio-bank-widths, so define an arbitrary maximum number of
> items based on current users.
> 
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
-- 
Florian

Re: [PATCH v3 3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property

[Krzysztof Kozlowski]

On Thu, Dec 12, 2024 at 06:36:30PM +0000, Dave Stevenson wrote:
> gpio-line-names is a generic property that can be supported by any
> GPIO controller, so permit it through the binding.
> 
> It is permitted to have a variable number of GPIOs per node based
> on brcm,gpio-bank-widths, so define an arbitrary maximum number of
> items based on current users.
> 
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
>  Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v3 3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property

[Linus Walleij]

On Thu, Dec 12, 2024 at 7:36 PM Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:

> gpio-line-names is a generic property that can be supported by any
> GPIO controller, so permit it through the binding.
>
> It is permitted to have a variable number of GPIOs per node based
> on brcm,gpio-bank-widths, so define an arbitrary maximum number of
> items based on current users.
>
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Perhaps Bartosz can just apply this one patch separately?

Yours,
Linus Walleij

Re: [PATCH v3 3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property

[Dave Stevenson]

Hi Linus

On Fri, 20 Dec 2024 at 12:50, Linus Walleij <linus.walleij@linaro.org> wrote:
>
> On Thu, Dec 12, 2024 at 7:36 PM Dave Stevenson
> <dave.stevenson@raspberrypi.com> wrote:
>
> > gpio-line-names is a generic property that can be supported by any
> > GPIO controller, so permit it through the binding.
> >
> > It is permitted to have a variable number of GPIOs per node based
> > on brcm,gpio-bank-widths, so define an arbitrary maximum number of
> > items based on current users.
> >
> > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Thank you.

> Perhaps Bartosz can just apply this one patch separately?

I believe he already has, but commented against the cover letter
rather than this patch -
https://lore.kernel.org/linux-arm-kernel/173434013318.38429.808413721248542013.b4-ty@linaro.org/

  Dave

> Yours,
> Linus Walleij

Re: [PATCH v3 3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property

[Bartosz Golaszewski]

On Fri, Dec 20, 2024 at 2:02 PM Dave Stevenson
<dave.stevenson@raspberrypi.com> wrote:
>
> Hi Linus
>
> On Fri, 20 Dec 2024 at 12:50, Linus Walleij <linus.walleij@linaro.org> wrote:
> >
> > On Thu, Dec 12, 2024 at 7:36 PM Dave Stevenson
> > <dave.stevenson@raspberrypi.com> wrote:
> >
> > > gpio-line-names is a generic property that can be supported by any
> > > GPIO controller, so permit it through the binding.
> > >
> > > It is permitted to have a variable number of GPIOs per node based
> > > on brcm,gpio-bank-widths, so define an arbitrary maximum number of
> > > items based on current users.
> > >
> > > Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> >
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> Thank you.
>
> > Perhaps Bartosz can just apply this one patch separately?
>
> I believe he already has, but commented against the cover letter
> rather than this patch -
> https://lore.kernel.org/linux-arm-kernel/173434013318.38429.808413721248542013.b4-ty@linaro.org/
>

Ah, this is how b4 works. Even if you apply a single patch, it
responds to the cover letter (or the first patch in the series if
there's no cover letter).

Bart

[PATCH v3 4/7] dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement

[Dave Stevenson]

Since commit 88bbe85dcd37 ("irqchip: bcm2836: Move SMP startup code to
arch/arm (v2)") the bcm2836-l1-intc block on bcm2711 is only used as a
base address for the smp_boot_secondary hook on 32 bit kernels. It is
not used as an interrupt controller.

Drop the binding requirement for interrupt-controller and interrupt-cells
to satisfy validation on this platform.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml  | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
index 5fda626c80ce..2ff390c1705b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
@@ -34,8 +34,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupt-controller
-  - '#interrupt-cells'
 
 additionalProperties: false
 

-- 
2.34.1

Re: [PATCH v3 4/7] dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement

[Krzysztof Kozlowski]

On Thu, Dec 12, 2024 at 06:36:31PM +0000, Dave Stevenson wrote:
> Since commit 88bbe85dcd37 ("irqchip: bcm2836: Move SMP startup code to
> arch/arm (v2)") the bcm2836-l1-intc block on bcm2711 is only used as a
> base address for the smp_boot_secondary hook on 32 bit kernels. It is
> not used as an interrupt controller.
> 
> Drop the binding requirement for interrupt-controller and interrupt-cells
> to satisfy validation on this platform.
> 
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---
>  .../devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml  | 2 --
>  1 file changed, 2 deletions(-)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v3 5/7] arm64: dts: broadcom: Rename bcm2712 interrupt controllers

[Dave Stevenson]

CHECK_DTBS produces errors on bcm2712-rpi-5-b.dtb and bcm2712-d-rpi-5-b.dtb
of:
intc@7d508380: $nodename:0: 'intc@7d508380' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
        from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
intc@7d508400: $nodename:0: 'intc@7d508400' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
        from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#

Rename the nodes from intc to interrupt-controller.

Fixes: f66b382affd8 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 39305e0869ec..bd78af0211b6 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -336,7 +336,7 @@ ddc1: i2c@7d508280 {
 			#size-cells = <0>;
 		};
 
-		bsc_irq: intc@7d508380 {
+		bsc_irq: interrupt-controller@7d508380 {
 			compatible = "brcm,bcm7271-l2-intc";
 			reg = <0x7d508380 0x10>;
 			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
@@ -344,7 +344,7 @@ bsc_irq: intc@7d508380 {
 			#interrupt-cells = <1>;
 		};
 
-		main_irq: intc@7d508400 {
+		main_irq: interrupt-controller@7d508400 {
 			compatible = "brcm,bcm7271-l2-intc";
 			reg = <0x7d508400 0x10>;
 			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;

-- 
2.34.1

Re: [PATCH v3 5/7] arm64: dts: broadcom: Rename bcm2712 interrupt controllers

[Florian Fainelli]

From: Florian Fainelli <f.fainelli@gmail.com>

On Thu, 12 Dec 2024 18:36:32 +0000, Dave Stevenson <dave.stevenson@raspberrypi.com> wrote:
> CHECK_DTBS produces errors on bcm2712-rpi-5-b.dtb and bcm2712-d-rpi-5-b.dtb
> of:
> intc@7d508380: $nodename:0: 'intc@7d508380' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
>         from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
> intc@7d508400: $nodename:0: 'intc@7d508400' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
>         from schema $id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
> 
> Rename the nodes from intc to interrupt-controller.
> 
> Fixes: f66b382affd8 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next, thanks!
--
Florian

[PATCH v3 6/7] arm64: dts: broadcom: Correct hdmi device node names

[Dave Stevenson]

The names of the hdmi0 and hdmi1 nodes had addresses that
didn't match the reg properties for the nodes.

Fixes: f66b382affd8 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index bd78af0211b6..f42fad2d8b37 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -352,7 +352,7 @@ main_irq: interrupt-controller@7d508400 {
 			#interrupt-cells = <1>;
 		};
 
-		hdmi0: hdmi@7ef00700 {
+		hdmi0: hdmi@7c701400 {
 			compatible = "brcm,bcm2712-hdmi0";
 			reg = <0x7c701400 0x300>,
 			      <0x7c701000 0x200>,
@@ -381,7 +381,7 @@ hdmi0: hdmi@7ef00700 {
 			ddc = <&ddc0>;
 		};
 
-		hdmi1: hdmi@7ef05700 {
+		hdmi1: hdmi@7c706400 {
 			compatible = "brcm,bcm2712-hdmi1";
 			reg = <0x7c706400 0x300>,
 			      <0x7c706000 0x200>,

-- 
2.34.1

Re: [PATCH v3 6/7] arm64: dts: broadcom: Correct hdmi device node names

[Florian Fainelli]

From: Florian Fainelli <f.fainelli@gmail.com>

On Thu, 12 Dec 2024 18:36:33 +0000, Dave Stevenson <dave.stevenson@raspberrypi.com> wrote:
> The names of the hdmi0 and hdmi1 nodes had addresses that
> didn't match the reg properties for the nodes.
> 
> Fixes: f66b382affd8 ("arm64: dts: broadcom: Add display pipeline support to BCM2712")
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next, thanks!
--
Florian

[PATCH v3 7/7] arm64: dts: broadcom: Remove intc controller on BCM2712.

[Dave Stevenson]

The brcm,bcm2836-l1-intc controller isn't used on this platform.
It is used on 32-bit kernels for the smp_boot_secondary hook, but
BCM2712 can't run a 32-bit kernel.

Remove the node.

Fixes: e1417095a139 ("arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index f42fad2d8b37..9a426aa27c74 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -221,11 +221,6 @@ mailbox: mailbox@7c013880 {
 			#mbox-cells = <0>;
 		};
 
-		local_intc: interrupt-controller@7cd00000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x7cd00000 0x100>;
-		};
-
 		uart10: serial@7d001000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x7d001000 0x200>;

-- 
2.34.1

Re: [PATCH v3 7/7] arm64: dts: broadcom: Remove intc controller on BCM2712.

[Florian Fainelli]

From: Florian Fainelli <f.fainelli@gmail.com>

On Thu, 12 Dec 2024 18:36:34 +0000, Dave Stevenson <dave.stevenson@raspberrypi.com> wrote:
> The brcm,bcm2836-l1-intc controller isn't used on this platform.
> It is used on 32-bit kernels for the smp_boot_secondary hook, but
> BCM2712 can't run a 32-bit kernel.
> 
> Remove the node.
> 
> Fixes: e1417095a139 ("arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT")
> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next, thanks!
--
Florian

Re: (subset) [PATCH v3 0/7] drm/vc4: Fixup DT and DT binding issues from recent patchset

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Thu, 12 Dec 2024 18:36:27 +0000, Dave Stevenson wrote:
> I missed the DT errors from the recent patchset[1] (DT patches
> in linux-next via Florian, DRM bindings patches on dri-misc-next)
> as Rob's bot report got spam filtered, so this is a fixup set.
> 
> Largely it was changes to number of interrupts or clocks in the
> bindings, so those are now covered.
> 
> [...]

Applied, thanks!

[3/7] dt-bindings: gpio: brcmstb: permit gpio-line-names property
      commit: 83a9752729c455a6bd9b7cf62198506180691931

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Re: [PATCH v3 0/7] drm/vc4: Fixup DT and DT binding issues from recent patchset

[Florian Fainelli]

On 12/12/24 10:36, Dave Stevenson wrote:
> I missed the DT errors from the recent patchset[1] (DT patches
> in linux-next via Florian, DRM bindings patches on dri-misc-next)
> as Rob's bot report got spam filtered, so this is a fixup set.
> 
> Largely it was changes to number of interrupts or clocks in the
> bindings, so those are now covered.
> 
> I've fixed up the missing "interrupt-controller" flags for 2711
> and 2712 whilst here.
> 
> I can't get my head around what is meant to happen with ranges:
> "soc@107c000000: firmware: 'ranges' is a required property"
> The meaning seems obvious.
> 
> However if I add it then I get:
> "firmware: '#address-cells', '#size-cells', 'dma-ranges', 'ranges' do
> not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
> 
> There's obviously some other flag I need to set in the bindings,
> but I can't work it out. We have similar errors for all the Pi
> platforms for one or more nodes.
> Please advise and I'll happily fix them all.

Dave, as proposed earlier, I have squashed/fixed up the fixes into their 
original commit since those were only in linux-next. Thanks!
-- 
Florian