From: Christof Bodner <oe8bck@gmx.net>
To: linux-hams@vger.kernel.org
Subject: Ubuntu 8.10 and AX25
Date: Sun, 05 Oct 2008 19:34:14 +0200 [thread overview]
Message-ID: <1223228054.9867.13.camel@rosi> (raw)
Hi!
I have a SignaLink USB device and it's working fine, except AX25 in
Linux (mhm, so it's not really working fine, isn't it?)
If I start it with
sudo mdprobe mkiss
sudo soundmodem -v 5
I get
---
sm[10003]: mkiss: ifname ax0 mtu 256 hwaddr OE8BCK-1 ipaddr 10.0.0.1
netmask 255.255.255.0 broadcast 10.0.0.255
sm[10003]: audio: starting "/dev/dsp2"
sm[10003]: audio: sample rate 9600 input fragsz 256 numfrags 512 output
fragsz 256 numfrags 820
sm[10003]: unknown kiss packet: 0x80 0xa2
sm[10003]: unknown kiss packet: 0x20 0xa2
Tx: fm OE8BCK-1 to QST-0 UI pid=CC
...
---
Then a lot of Tx frames are sent (would be sent if I would switch in
TX)
Does anybody know hoe to turn it off at Ubuntu 8.10?
And then, exactly ONE RX frame is captured, e.g.
Rx: fm OE1UHA-9 to TX0R18-0 via OE1XQR-0,WIDE2-0 UIv pid=F0
`,.Xmz3>/ON THE ROAD
dmesg gives the output:
[ 4763.523335] usb 5-2.1.4: configuration #1 chosen from 1 choice
[ 4763.525286] input: Burr-Brown from TI USB Audio CODEC
as /class/input/input6
[ 4763.527643] input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI
USB Audio CODEC ] on usb-0000:01:09.2-2.1.4
[ 4764.858704] usbcore: registered new interface driver snd-usb-audio
[ 4834.952618] NET: Registered protocol family 3
[ 4835.007632] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[ 4850.084131] mkiss: ax0: crc mode is auto.
[ 4850.160087] mkiss: ax0: Trying crc-smack
[ 4850.316183] mkiss: ax0: Trying crc-flexnet
Some other correct RX-frames can be received by restarting soundmodem.
So why do I have to restart soundmodem given this result?
---
sm[10313]: mkiss: ifname ax0 mtu 256 hwaddr OE8BCK-1 ipaddr 10.0.0.1
netmask 255.255.255.0 broadcast 10.0.0.255
sm[10313]: audio: starting "/dev/dsp2"
sm[10313]: audio: sample rate 9600 input fragsz 256 numfrags 512 output
fragsz 256 numfrags 820
sm[10313]: unknown kiss packet: 0x80 0xa2
sm[10313]: unknown kiss packet: 0x20 0xa2
Tx: fm OE8BCK-1 to QST-0 UI pid=CC
...
---
It's a little bit annoying to restart soundmodem each minute, so I need
your tips.
73 de christof, oe8bck
--
(0-0)
---------oOO--(_)--OOo-----------------------------------------------
Christof Bodner <oe8bck@gmx.net>
Linux - Life is too short for reboots
- First they ignore you. Then they laugh at you. Then they
fight you(*). Then you win. -- Ghandi
---------------------------------------------------------------------
email: mailto:oe8bck@gmx.net
---------------------------------------------------------------------
GnuPG public key: 0xB15DA60F (http://wwwkeys.eu.pgp.net)
Fingerprint 5222 4DEA 773A 60B3 22F9 D244 15EF 6645 B15D A60F
---------------------------------------------------------------------
next reply other threads:[~2008-10-05 17:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-05 17:34 Christof Bodner [this message]
2008-10-05 18:09 ` Ubuntu 8.10 and AX25 don
2008-10-06 17:53 ` Christof Bodner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1223228054.9867.13.camel@rosi \
--to=oe8bck@gmx.net \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox