Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
From: EB3CZS Xavier Crehueras <eb3czs@qsl.net>
To: Dexy <dexy@ihug.co.nz>
Cc: linux-hams@vger.kernel.org
Subject: Re: Compaq Presario 901AT / RedHat 8.0 hiccup
Date: Tue, 28 Jan 2003 11:19:11 +0100	[thread overview]
Message-ID: <20030128111911.1d1b043e.eb3czs@qsl.net> (raw)
In-Reply-To: <000b01c2c6b0$d5450810$94dfadcb@Cpq>

Hello all,

I just installed Debian GNU/Linux 3.0 woody on a Compaq Presario 920 a few days ago. I had to install it with a 2.2 kernel because the 2.4 kernel kept locking on boot with a CPU exception. Once installed, I compiled a kernel 2.4.19 and it worked with the exception of pcmcia. Loading pcmcia cardmgr crashed the kernel with a CPU exception.

Hope this helps.
73s de Xavi

On Tue, 28 Jan 2003 22:35:47 +1300
"Dexy" <dexy@ihug.co.nz> wrote:

> Greetings, all
> 
>    I tried Mandrake 6.5 on this machine, but couldn't get the screen to set
> up.  Someone suggested newer linux, so I downloaded RH8 and made a bootable
> CD install set.  The Disk 1 boots fine, but it only gets as far as the
> partition check (bear with me, this was written down from the screen):
> 
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ALI15X3: IDE controller on PCI bus 00 dev 80
> PCI: No IRQ known for interrupt pin A of device 00:10.0. Please try using
> pci=biosirq
> ALI15X3: chipset revision 196
> ALI15X3: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0x8080-0x8087, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0x8088-0x808f, BIOS settings: hdc:pio, hdd:pio
> hda: FUJITSU MHR2020AT, ATA DISK drive
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hdc: Compaq CRN-8245B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
> ide1 at 0x170-0x177, 0x376 on irq 15
> hda: 39070080 sectors (20004MB) w/2048KiB Cache, CHS=2432/255/63, (U)DMA
> hdc: ATAPI 24x CD-ROM drive, 128KB Cache
> Uniform CD-ROM driver Revision: 3.12
> ide-floppy driver 0.99.newide
> Partition check:
>     hda:spurious 8259A interrupt: IRQ7
> 
>    (there is a pause at hda: then spurious... comes up)
>    At this point the machine locks up, with the drive light lit.
> 
>    Using pci=biosirq (see line 4 above) makes no difference.  What is device
> 00:10.0?
> 
>    The partition it is checking is the default 18GB WinXP.  Is it actually
> checking this?  I'd have thought it would be hda1, but it's only showing as
> hda.  I've left the machine going for 1/2-hour, it surely would have checked
> it by then if it was going to.
> 
>    IRQ7 is usually something to do with the // port, no?  Then why is it
> happening during boot?  There's a facility do disable the port during boot,
> but this makes no difference, nor does changing from Bi-dir to EPP to
> EPP/ECP.
> 
>    Incidentally, the // port is the reason I'm trying linux - XP trashes it
> as far as use for "Push to talk" for an Amateur Radio transciever, and
> there's no Com port I can use :-(.  It works fine under 98se, but I can't
> get screen drivers.
> 
>    Is there anyone out there who can give me tips on how to get this going?
> 
> Cheers
> Dex ZL2DEX
> 
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


-- 

73 de Xavi EB3CZS
JN11bl

      reply	other threads:[~2003-01-28 10:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-01-28  9:35 Compaq Presario 901AT / RedHat 8.0 hiccup Dexy
2003-01-28 10:19 ` EB3CZS Xavier Crehueras [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030128111911.1d1b043e.eb3czs@qsl.net \
    --to=eb3czs@qsl.net \
    --cc=dexy@ihug.co.nz \
    --cc=linux-hams@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox