ANNOUNCE: gMFSK v0.5

ANNOUNCE: gMFSK v0.5

[Tomi Manninen]

Hi all,

I just uploaded gMFSK v0.5 to hes.iki.fi:

  http://hes.iki.fi/pub/ham/unix/linux/hfmodems/

There you will find a tar.gz source package, a source RPM and a binary
i386 RPM for Red Hat 8.0.

I release this version now not because it's ready but because if I don't
release it now, I will never release it. It's up to you to find all the
bugs. :-)

This is a rather extensive re-write as I have switched to using GTK+ 2 /
Gnome 2. Consequently there are still some unimplemented features compared
to v0.4.1.

The most important new features are the port to GTK+ 2 / Gnome 2 and the 
new modems: MFSK8, (Q)PSK31, MT63 and FeldHell. FeldHell is RX only for 
now. I have previously written a Hellscreiber program for GTK+ 1.x but 
never released it. Now I need to figure out how to do the character 
rendering for TX in GTK+ 2.

PSK31 and MT63 borrow a lot from other peoples code so they should work 
pretty well. However MT63 has no support for the extended features in 
Nino's program or MixW. MFSK8 seems to work but is pretty much untested.

Bear in mind that this is very much work in progress. All bug reports,
feature requests and contributed code is welcome, though I reserve the
right to select what will make it to the next release... :)

Last but not least there is the name issue. The program is not anymore a 
collection of various M-ary FSK modems, there are PSK, OFDM and Fuzzy 
modes as well. So the name is not the best one anymore. Suggestions for a 
new name are welcome!

Now, share and enjoy!

-- 
Tomi Manninen           Internet:  oh2bns@sral.fi
OH2BNS                  AX.25:     oh2bns@oh2rbi.fin.eu
KP20ME04                Amprnet:   oh2bns@oh2rbi.ampr.org

Re: ANNOUNCE: gMFSK v0.5

[Hamish Moffatt]

On Sat, Apr 19, 2003 at 09:58:04PM +0300, Tomi Manninen wrote:
> Hi all,
> 
> I just uploaded gMFSK v0.5 to hes.iki.fi:
> 
>   http://hes.iki.fi/pub/ham/unix/linux/hfmodems/
> 
> There you will find a tar.gz source package, a source RPM and a binary
> i386 RPM for Red Hat 8.0.

Neat! Compiled easily on Debian and I'll upload the package shortly.
You have a great collection of modes. I'm looking forward to trying it
on air.

> Last but not least there is the name issue. The program is not anymore a 
> collection of various M-ary FSK modems, there are PSK, OFDM and Fuzzy 
> modes as well. So the name is not the best one anymore. Suggestions for a 
> new name are welcome!

Tough decision! You could always borrow parts of similar programs' names
an add a G prefix :-) Like gMix or gScope or something. But there should
be a better option.

One query about MFSK16/8 mode: when idling it still sends a lot of tones.
IZ8BLY's Stream sends a lot of pure carrier with occasional tones. The
pure carrier while idle or at the start of a transmission makes it a lot 
easier for the RX station to tune.

Hamish
-- 
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>

Re: ANNOUNCE: gMFSK v0.5

[Gérard Parat / F6FGZ]

> > Last but not least there is the name issue. The program is not anymore a
> > collection of various M-ary FSK modems, there are PSK, OFDM and Fuzzy
> > modes as well. So the name is not the best one anymore. Suggestions for a
> > new name are welcome!
>
> Tough decision! You could always borrow parts of similar programs' names
> an add a G prefix :-) Like gMix or gScope or something. But there should
> be a better option.

What about Tomix or Tomisk ?

--
73 Gérard F6FGZ
-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: ANNOUNCE: gMFSK v0.5

[Arno Verhoeven]

Hamish Moffatt wrote:
> On Sat, Apr 19, 2003 at 09:58:04PM +0300, Tomi Manninen wrote:
> 
>>Hi all,
>>
>>I just uploaded gMFSK v0.5 to hes.iki.fi:
>>
>>  http://hes.iki.fi/pub/ham/unix/linux/hfmodems/
>>
>>There you will find a tar.gz source package, a source RPM and a binary
>>i386 RPM for Red Hat 8.0.
> 
> 
> Neat! Compiled easily on Debian and I'll upload the package shortly.

It doesn't on my machine (Slackware 9.0). If tried with both fftw-3.0 and 2.1.5
but in both cases configure gives an error.

configure: error: FFTW libraries not found!!!

Does anybody know a way how to solve this?


-- 
73, PE1ICQ  Arno Verhoeven
--------------------------------
AX.25  pe1icq@pi8zaa.#nbo.nld.eu
smtp   pe1icq@pi8zaa.ampr.org
inet   pe1icq@amsat.org

Re: ANNOUNCE: gMFSK v0.5

[Tomi Manninen]

On Fri, 2003-07-11 at 23:29, Arno Verhoeven wrote:

> It doesn't on my machine (Slackware 9.0). If tried with both fftw-3.0 and 2.1.5
> but in both cases configure gives an error.
> 
> configure: error: FFTW libraries not found!!!

Could you send me the list of files installe by your FFTW packages? 
In the past various packagers have used different library names
when packaging FFTW and this has caused problems detecting it...

-- 
Tomi Manninen           Internet:  oh2bns@sral.fi
OH2BNS                  AX.25:     oh2bns@oh2rbi.fin.eu
KP20ME04                Amprnet:   oh2bns@oh2rbi.ampr.org

Re: ANNOUNCE: gMFSK v0.5

[Wilbert Knol]

On Friday 11 July 2003 09:11, Tomi Manninen wrote:
> On Fri, 2003-07-11 at 23:29, Arno Verhoeven wrote:
> > It doesn't on my machine (Slackware 9.0). If tried with both fftw-3.0 and
> > 2.1.5 but in both cases configure gives an error.
> >
> > configure: error: FFTW libraries not found!!!

Just finished compiling it on a SuSE 8.1 box.
Although I needed to install a bunch of Gnome libraries, as well as the fast 
Fourier libraries, no Funny Business was required.

It's going great on the IceWM desktop.
Pretty impressive...even Feld-Hell :-)

Wilbert, ZL2BSJ

Re: ANNOUNCE: gMFSK v0.5

[Aleksandar Ilic]

On Friday 11 July 2003 22:29, Arno Verhoeven wrote:
> > Neat! Compiled easily on Debian and I'll upload the package shortly.
> It doesn't on my machine (Slackware 9.0). If tried with both fftw-3.0 and
> 2.1.5 but in both cases configure gives an error.
>
> configure: error: FFTW libraries not found!!!
>
> Does anybody know a way how to solve this?

It works here on Slack 9.
Grep your /etc/ld.so.cache to be sure libfft is in it.
When I compiled fft-2.1.3, it was necessary to :
./configure --enable-shared
or libraries was not cached.

kindly,
Alek
-- 
  73 de YU1IS  -=-  ICQ# 62419462

Re: ANNOUNCE: gMFSK v0.5

[Arno Verhoeven]

Aleksandar Ilic wrote:

>On Friday 11 July 2003 22:29, Arno Verhoeven wrote:
>  
>
>>>Neat! Compiled easily on Debian and I'll upload the package shortly.
>>>      
>>>
>>It doesn't on my machine (Slackware 9.0). If tried with both fftw-3.0 and
>>2.1.5 but in both cases configure gives an error.
>>
>>configure: error: FFTW libraries not found!!!
>>
>>Does anybody know a way how to solve this?
>>    
>>
>
>It works here on Slack 9.
>Grep your /etc/ld.so.cache to be sure libfft is in it.
>When I compiled fft-2.1.3, it was necessary to :
>./configure --enable-shared
>or libraries was not cached.
>  
>

Adding --enable-shared did the trick.
(I should have noticed that the .so files were not there....)

Thanks.

-- 
73, PE1ICQ  Arno Verhoeven
--------------------------------
AX.25  pe1icq@pi8zaa.#nbo.nld.eu
smtp   pe1icq@pi8zaa.ampr.org
inet   pe1icq@amsat.org

PROBLEM: gMFSK v0.5 locks up.

[Arno Verhoeven]

Hi,

Now that I've got gmfsk to compile, I run into another problem.

Until now I didn't get it to produce any sound yet. (sound works on that 
system. Other applications can use the sound card)

There are 2 ways that I can make gmfsk lock up.

1. click the "Abort transmission immediately" button.
2. click the "Mode" pull-down menu and try to select another mode.

There are no messages in /var/log/syslog and /var/log/messages
I'm using fftw-2.1.5, kernel 2.4.21 glibc-2.3.1 and all were compiled 
with gcc-3.2.3.

Any ideas? Can somebody point me in the right direction?

-- 
73, PE1ICQ  Arno Verhoeven
--------------------------------
AX.25  pe1icq@pi8zaa.#nbo.nld.eu
smtp   pe1icq@pi8zaa.ampr.org
inet   pe1icq@amsat.org

Re: PROBLEM: gMFSK v0.5 locks up.

[Hamish Moffatt]

On Sat, Jul 12, 2003 at 10:04:13AM +0200, Arno Verhoeven wrote:
> Now that I've got gmfsk to compile, I run into another problem.
> 
> Until now I didn't get it to produce any sound yet. (sound works on that 
> system. Other applications can use the sound card)
> 
> There are 2 ways that I can make gmfsk lock up.
> 
> 1. click the "Abort transmission immediately" button.
> 2. click the "Mode" pull-down menu and try to select another mode.
> 
> There are no messages in /var/log/syslog and /var/log/messages
> I'm using fftw-2.1.5, kernel 2.4.21 glibc-2.3.1 and all were compiled 
> with gcc-3.2.3.

In what way does it lock up? Just the program hangs or all X programs or
your whole system?

Hamish
-- 
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>

Re: PROBLEM: gMFSK v0.5 locks up.

[Arno Verhoeven]

On Sat, 12 Jul 2003, Hamish Moffatt wrote:

> On Sat, Jul 12, 2003 at 10:04:13AM +0200, Arno Verhoeven wrote:
> > Now that I've got gmfsk to compile, I run into another problem.
> >
> > Until now I didn't get it to produce any sound yet. (sound works on that
> > system. Other applications can use the sound card)
> >
> > There are 2 ways that I can make gmfsk lock up.
> >
> > 1. click the "Abort transmission immediately" button.
> > 2. click the "Mode" pull-down menu and try to select another mode.
> >
> > There are no messages in /var/log/syslog and /var/log/messages
> > I'm using fftw-2.1.5, kernel 2.4.21 glibc-2.3.1 and all were compiled
> > with gcc-3.2.3.
>
> In what way does it lock up? Just the program hangs or all X programs or
> your whole system?
>

Just gmfsk hangs. Other X programs work just fine.

73, PE1ICQ  Arno Verhoeven
--------------------------------
AX.25  pe1icq@pi8zaa.#nbo.nld.eu
smtp   pe1icq@pi8zaa.ampr.org
inet   pe1icq@amsat.org

Re: PROBLEM: gMFSK v0.5 locks up.

[Edson Pereira]

Arno,

With strace, check if the program is hanging on a system call (read,
write, ioctl more precisely). I have found this problem few times with OSS
Free. Most recently with a laptop the problem was resolved using alsa.

73,

-- Edson, 7n4ncl

On Sat, 12 Jul 2003, Arno Verhoeven wrote:

> On Sat, 12 Jul 2003, Hamish Moffatt wrote:
> 
> > On Sat, Jul 12, 2003 at 10:04:13AM +0200, Arno Verhoeven wrote:
> > > Now that I've got gmfsk to compile, I run into another problem.
> > >
> > > Until now I didn't get it to produce any sound yet. (sound works on that
> > > system. Other applications can use the sound card)
> > >
> > > There are 2 ways that I can make gmfsk lock up.
> > >
> > > 1. click the "Abort transmission immediately" button.
> > > 2. click the "Mode" pull-down menu and try to select another mode.
> > >
> > > There are no messages in /var/log/syslog and /var/log/messages
> > > I'm using fftw-2.1.5, kernel 2.4.21 glibc-2.3.1 and all were compiled
> > > with gcc-3.2.3.
> >
> > In what way does it lock up? Just the program hangs or all X programs or
> > your whole system?
> >
> 
> Just gmfsk hangs. Other X programs work just fine.
> 
> 73, PE1ICQ  Arno Verhoeven
> --------------------------------
> AX.25  pe1icq@pi8zaa.#nbo.nld.eu
> smtp   pe1icq@pi8zaa.ampr.org
> inet   pe1icq@amsat.org
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-hams" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

SOLVED (Re: PROBLEM: gMFSK v0.5 locks up.)

[Arno Verhoeven]

Edson Pereira wrote:

>Arno,
>
>With strace, check if the program is hanging on a system call (read,
>write, ioctl more precisely). I have found this problem few times with OSS
>Free. Most recently with a laptop the problem was resolved using alsa.
>
>73,
>
>-- Edson, 7n4ncl
>  
>

Purpose of this mail is mainly to help others with similar problems. 
They can find the solution when searching the linux-hams archive.

The problem was indeed solved when I use ALSA.

Thanks Tomi and Edson for your help.

-- 
73, PE1ICQ  Arno Verhoeven
--------------------------------
AX.25  pe1icq@pi8zaa.#nbo.nld.eu
smtp   pe1icq@pi8zaa.ampr.org
inet   pe1icq@amsat.org

Re: PROBLEM: gMFSK v0.5 locks up.

[Tomi Manninen]

On Sat, 2003-07-12 at 11:04, Arno Verhoeven wrote:

> Until now I didn't get it to produce any sound yet. (sound works on that 
> system. Other applications can use the sound card)

Are you getting any sound input? I mean does the waterfall show any 
noise?

> 1. click the "Abort transmission immediately" button.
> 2. click the "Mode" pull-down menu and try to select another mode.

This would indicate that the current RX thread is stuck somewhere
(and the rest of the program is waiting for it to complete). It could
be a blocked open() or read(). Are you sure no-one else is having the
sound card open?

Edson's idea is also good. Knowing where exactly it is stuck is
valuable information.

Oh, does the CPU load increase when gmfsk is locked up?

-- 
Tomi Manninen           Internet:  oh2bns@sral.fi
OH2BNS                  AX.25:     oh2bns@oh2rbi.fin.eu
KP20ME04                Amprnet:   oh2bns@oh2rbi.ampr.org

Re: PROBLEM: gMFSK v0.5 locks up.

[Arno Verhoeven]

Tomi Manninen wrote:

>On Sat, 2003-07-12 at 11:04, Arno Verhoeven wrote:
>
>  
>
>>Until now I didn't get it to produce any sound yet. (sound works on that 
>>system. Other applications can use the sound card)
>>    
>>
>
>Are you getting any sound input? I mean does the waterfall show any 
>noise?
>

No, nothing shows up.

>>1. click the "Abort transmission immediately" button.
>>2. click the "Mode" pull-down menu and try to select another mode.
>>    
>>
>
>This would indicate that the current RX thread is stuck somewhere
>(and the rest of the program is waiting for it to complete). It could
>be a blocked open() or read(). Are you sure no-one else is having the
>sound card open?
>

I have no other program running that would use the sound card. Th elock
ups also occur when I use a simple windowmanger like twm.
(trying to avoid kde's sound server from interfering...)

>Edson's idea is also good. Knowing where exactly it is stuck is
>valuable information.
>

This is the last bit of output from strace after I try to select another
mode.

ead(3, "\7\4b\23i\v@\1:\0\0\0002\0 \0034\0 \3f\2X\0!\0\3\0\20\0"..., 32) = 32
read(3, "\7\3b\23i\v@\1:\0\0\0004\0 \3\0\0\0\0f\2X\0\37\0\1\0\20"..., 32) = 32
read(3, "\22\0d\23\216\1 \3\216\1 \3\0\16\217\10\216\1 \3\0\0\0"..., 32) = 32
read(3, "\10\3e\23i\v@\1:\0\0\0\37\0 \3\0\0\0\0f\2X\0I\0D\0\20\0"..., 32) = 32
read(3, "\7\4e\23i\v@\1:\0\0\0002\0 \0034\0 \3f\2X\0!\0\3\0\20\0"..., 32) = 32
read(3, "\7\3e\23i\v@\1:\0\0\0004\0 \3\0\0\0\0f\2X\0\37\0\1\0\20"..., 32) = 32
read(3, "\t\3f\23\4\0 \3\2\364\377\277\37I\f\10\310\22`\10\3002"..., 32) = 32
read(3, "\1\2g\23\0\0\0\0\4\0 \3\0\0\0\0\0\0\0\0\1\0\0\0\0\327\332"..., 32) = 32
rt_sigprocmask(SIG_SETMASK, NULL, [RTMIN], 8) = 0
rt_sigsuspend([]

>Oh, does the CPU load increase when gmfsk is locked up?
>  
>

No, the CPU load doesn't go up.


-- 
73, PE1ICQ  Arno Verhoeven
--------------------------------
AX.25  pe1icq@pi8zaa.#nbo.nld.eu
smtp   pe1icq@pi8zaa.ampr.org
inet   pe1icq@amsat.org