From: Pino Zollo <pinozollo@gmail.com>
To: Yahoo linux hams <linuxhams@yahoogroups.com>,
pa0r <rein@couperus.com>,
"Marco Di Martino (IW2OHX)" <iw2ohx@eutelia.com>,
Linux Hams <linux-hams@vger.kernel.org>, Joop Stakenborg <pg>
Subject: DBLog 0.9.2
Date: Wed, 16 Apr 2008 15:07:52 -0400 [thread overview]
Message-ID: <200804161507.56441.pinozollo@gmail.com> (raw)
The new version of DBLog, the 0.9.2 is available on
http://www.qsl.net/zp4kfx/Linux
Now DBLog uses rigctld daemon from hamlib 1.2.7 to read and set frequency an
modes of the radio.
This allows the use of all hamlib supported radios.
DBLog is written in GAMBAS (2) and distributed in source code under the GPL
licence.
It stores all the data in a RDBM: PostgreSQL is used in the development, but
MySQL, QSLite3 and Firebird should work too.
DBLog receives cluster spots from xdx, checks them against local statistics
and shows the results in a dedicated window.
Clicking on a spot sets the radio RX frequency and eventually the split TX
one.
Can transmit CW using cwdaemon.
An azimuthal map centred on the QTH is available via xplanet, showing also
the position of the other station.
A Screeshot is available on the downloading page.
Comments and bug reports are aways welcome.
73 de
Pino ZP4KFX
reply other threads:[~2008-04-16 19:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200804161507.56441.pinozollo@gmail.com \
--to=pinozollo@gmail.com \
--cc=iw2ohx@eutelia.com \
--cc=linux-hams@vger.kernel.org \
--cc=linuxhams@yahoogroups.com \
--cc=rein@couperus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox