From: Bill Walton <kj6eo@kj6eo.com>
To: LINUX HAMS MAILING LIST <linux-hams@vger.kernel.org>
Subject: AX25 Nightmare!
Date: Fri, 04 Oct 2002 19:46:32 -0700 [thread overview]
Message-ID: <3D9E5288.76B22B08@kj6eo.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1504 bytes --]
Hello Linux-Hams List -
Thank you for taking the time to read my request. I want to thank those of you who
have replied to my previous requests. I still have one fatal glitch regarding the AX25
stuff. When I try to connect to my node I get connected then it immediately sends
out a disconnect packet disconnecting me. If I connect to KJ6EO-14 or KJ6EO-15
I can get connected but it just sits there brain dead. The only thing it will let me do
with any response at all is disconnect from it.
I have got my configuration as close as I could to John Ackermann's "Configuring
Linux AX.25 article".
I get no errors when I kissattach, nrattach, netromd, ax25d per my rc.local file. If
I do a "ifconfig" everything is up and running. I am going to attach the following files
to this email for your review:
axports, nrports, nrbroadcast, ax25d.conf, output (of ifconfig), node.conf, rc.local.
I notice that in the "ax25d.conf" file there is a path indicated to run the node daemon
for the callsigns and alias's. I have nothing at that location? at /usr/sbin/ there is no
"node" file there. Could this be why I am getting disconnected because the node
daemon is not running when I connect?
Any help that you could offer would be greatly appreciated. I have had enough of
AX25 today. I am going to watch STAR TREK on TNN and get off the planet for
a while (>:
Have an enjoyable evening and weekend!
Bill Walton KJ6EO
www.kj6eo.com
www.kj6eo.ampr.org
kj6eo@kj6eo.com
kj6eo@kj6eo.#sca.ca.usa.noam
[-- Attachment #2: output --]
[-- Type: text/plain, Size: 2520 bytes --]
ax0 Link encap:AMPR AX.25 HWaddr KJ6EO-15
inet addr:192.168.3.1 Mask:255.255.255.0
UP RUNNING MTU:256 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth0 Link encap:Ethernet HWaddr 00:04:5A:76:37:16
inet addr:64.174.110.108 Bcast:64.174.110.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:106 errors:0 dropped:0 overruns:0 frame:0
TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:15324 (14.9 Kb) TX bytes:10540 (10.2 Kb)
eth1 Link encap:Ethernet HWaddr 00:50:BA:C0:54:A8
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19 errors:0 dropped:0 overruns:0 frame:0
TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:2556 (2.4 Kb) TX bytes:5343 (5.2 Kb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:48 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:3148 (3.0 Kb) TX bytes:3148 (3.0 Kb)
nr0 Link encap:AMPR NET/ROM HWaddr KJ6EO-14
inet addr:192.168.3.1 Mask:255.255.255.0
UP RUNNING MTU:235 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
nr1 Link encap:AMPR NET/ROM HWaddr KJ6EO
inet addr:192.168.3.1 Mask:255.255.255.0
UP RUNNING MTU:235 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
nr2 Link encap:AMPR NET/ROM HWaddr KJ6EO-7
inet addr:192.168.3.1 Mask:255.255.255.0
UP RUNNING MTU:235 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[-- Attachment #3: axports --]
[-- Type: text/plain, Size: 155 bytes --]
# /etc/ax25/axports
#
# The format of this file is:
#
# name callsign speed paclen window description
#
vhf1 KJ6EO-15 9600 256 2 145.050 Mhz 1.2k Baud
[-- Attachment #4: node.conf --]
[-- Type: application/x-unknown-content-type-conf_auto_file, Size: 1744 bytes --]
[-- Attachment #5: nrbroadcast --]
[-- Type: text/plain, Size: 133 bytes --]
# /etc/ax25/nrbroadcast
#
# The format of this file is:
#
# ax25_name min_obs def_qual worst_qual verbose
#
vhf1 1 192 100 0
[-- Attachment #6: nrports --]
[-- Type: text/plain, Size: 242 bytes --]
# /etc/ax25/nrports
#
# The format of this file is:
#
# name callsign alias paclen description
#
netrom KJ6EO-14 #SCV 235 Switch
netbbs KJ6EO-0 EOBBS 235 FBB Port
netnod KJ6EO-7 SCV 235 NET/ROM Node
[-- Attachment #7: ax25d.conf --]
[-- Type: application/x-unknown-content-type-conf_auto_file, Size: 1709 bytes --]
[-- Attachment #8: rc.local --]
[-- Type: application/x-unknown-content-type-local_auto_file, Size: 1183 bytes --]
next reply other threads:[~2002-10-05 2:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-05 2:46 Bill Walton [this message]
2002-10-05 2:52 ` AX25 Nightmare! Steve Fraser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3D9E5288.76B22B08@kj6eo.com \
--to=kj6eo@kj6eo.com \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox