Linux HAM/Amateur Radio development
 help / color / mirror / Atom feed
* AX25 Nightmare!
@ 2002-10-05  2:46 Bill Walton
  2002-10-05  2:52 ` Steve Fraser
  0 siblings, 1 reply; 2+ messages in thread
From: Bill Walton @ 2002-10-05  2:46 UTC (permalink / raw)
  To: LINUX HAMS MAILING LIST

[-- Attachment #1: Type: text/plain, Size: 1504 bytes --]

Hello Linux-Hams List -

Thank you for taking the time to read my request.  I want to thank those of you who
have replied to my previous requests.  I still have one fatal glitch regarding the AX25
stuff.  When I try to connect to my node I get connected then it immediately sends
out a disconnect packet disconnecting me.  If I connect to KJ6EO-14 or KJ6EO-15
I can get connected but it just sits there brain dead.  The only thing it will let me do
with any response at all is disconnect from it.

I have got my configuration as close as I could to John Ackermann's "Configuring
Linux AX.25 article".

I get no errors when I kissattach, nrattach, netromd, ax25d per my rc.local file.  If
I do a "ifconfig" everything is up and running.  I am going to attach the following files
to this email for your review:

axports, nrports, nrbroadcast, ax25d.conf, output (of ifconfig), node.conf, rc.local.
I notice that in the "ax25d.conf" file there is a path indicated to run the node daemon
for the callsigns and alias's.  I have nothing at that location? at /usr/sbin/ there is no
"node" file there.  Could this be why I am getting disconnected because the node
daemon is not running when I connect?

Any help that you could offer would be greatly appreciated.  I have had enough of
AX25 today.  I am going to watch STAR TREK on TNN and get off the planet for
a while (>:

Have an enjoyable evening and weekend!

Bill Walton KJ6EO

www.kj6eo.com
www.kj6eo.ampr.org
kj6eo@kj6eo.com
kj6eo@kj6eo.#sca.ca.usa.noam

[-- Attachment #2: output --]
[-- Type: text/plain, Size: 2520 bytes --]

ax0       Link encap:AMPR AX.25  HWaddr KJ6EO-15  
          inet addr:192.168.3.1  Mask:255.255.255.0
          UP RUNNING  MTU:256  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth0      Link encap:Ethernet  HWaddr 00:04:5A:76:37:16  
          inet addr:64.174.110.108  Bcast:64.174.110.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:106 errors:0 dropped:0 overruns:0 frame:0
          TX packets:86 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:15324 (14.9 Kb)  TX bytes:10540 (10.2 Kb)

eth1      Link encap:Ethernet  HWaddr 00:50:BA:C0:54:A8  
          inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:19 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:2556 (2.4 Kb)  TX bytes:5343 (5.2 Kb)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:3148 (3.0 Kb)  TX bytes:3148 (3.0 Kb)

nr0       Link encap:AMPR NET/ROM  HWaddr KJ6EO-14  
          inet addr:192.168.3.1  Mask:255.255.255.0
          UP RUNNING  MTU:235  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

nr1       Link encap:AMPR NET/ROM  HWaddr KJ6EO  
          inet addr:192.168.3.1  Mask:255.255.255.0
          UP RUNNING  MTU:235  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

nr2       Link encap:AMPR NET/ROM  HWaddr KJ6EO-7  
          inet addr:192.168.3.1  Mask:255.255.255.0
          UP RUNNING  MTU:235  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)


[-- Attachment #3: axports --]
[-- Type: text/plain, Size: 155 bytes --]

# /etc/ax25/axports
#
# The format of this file is:
#
# name	callsign 	speed 	paclen 	window 	description
#
vhf1	KJ6EO-15	9600	256	2	145.050 Mhz 1.2k Baud

[-- Attachment #4: node.conf --]
[-- Type: application/x-unknown-content-type-conf_auto_file, Size: 1744 bytes --]

[-- Attachment #5: nrbroadcast --]
[-- Type: text/plain, Size: 133 bytes --]

# /etc/ax25/nrbroadcast
#
# The format of this file is:
#
# ax25_name min_obs def_qual worst_qual verbose
#
vhf1		1     192	100	   0

[-- Attachment #6: nrports --]
[-- Type: text/plain, Size: 242 bytes --]

# /etc/ax25/nrports
#
# The format of this file is:
#
# name 	callsign   alias   paclen   description
#
netrom  KJ6EO-14   #SCV    235      Switch 
netbbs  KJ6EO-0    EOBBS   235      FBB Port
netnod  KJ6EO-7    SCV     235      NET/ROM Node

[-- Attachment #7: ax25d.conf --]
[-- Type: application/x-unknown-content-type-conf_auto_file, Size: 1709 bytes --]

[-- Attachment #8: rc.local --]
[-- Type: application/x-unknown-content-type-local_auto_file, Size: 1183 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: AX25 Nightmare!
  2002-10-05  2:46 AX25 Nightmare! Bill Walton
@ 2002-10-05  2:52 ` Steve Fraser
  0 siblings, 0 replies; 2+ messages in thread
From: Steve Fraser @ 2002-10-05  2:52 UTC (permalink / raw)
  To: Bill Walton, LINUX HAMS MAILING LIST

Hi Bill,

I sympathise with you!

> I notice that in the "ax25d.conf" file there is a path indicated to run
the node daemon
> for the callsigns and alias's.  I have nothing at that location? at
/usr/sbin/ there is no
> "node" file there.  Could this be why I am getting disconnected because
the node
> daemon is not running when I connect?
>
Well, node is not actually a daemon, but yes, that'd be a real good reason
:-) The node program is NOT part of the utils/tools/lib suites - it comes as
a separate file. Its a program that ax25d.conf tells the real daemon, ax25d,
to run. However, being missing, ax25d accepts the connect, fails to find
/usr/sbin/node, and disconnects you. From memory, I think it puts a message
in syslog (or messages?) when it does this.

I cant remember where to find node, (funet?) but a web search should find it
for you.

73

Steve



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2002-10-05  2:52 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-10-05  2:46 AX25 Nightmare! Bill Walton
2002-10-05  2:52 ` Steve Fraser

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox