From: Richard Stearn <richard@rns-stearn.demon.co.uk>
To: Linux Hams <linux-hams@vger.kernel.org>
Subject: Re: Filter for 430Mhz
Date: Tue, 09 Aug 2005 22:25:36 +0100 [thread overview]
Message-ID: <42F91F50.9090509@rns-stearn.demon.co.uk> (raw)
In-Reply-To: <200508092151.57245.stephen@g6dzj.demon.co.uk>
Stephen Kitchener wrote:
> Hi,
>
> I have a problem with a really near 430Mz transmitter (my own) that is
> breaking though to the TV. The Transmitter isn't off tune and as far as I
> Know or can see, it isn't producing any side transmissions or birdies.
>
> So, My question is, does anyone know of a really good filter design or
> commercial filer that will block 430.625 so that it dosn't appear in the
> downlead to the TV.
>
> Thanks
Try:
http://www.ifwtech.co.uk/g3sek/swxfiltr/swxfiltr.htm
Bottom of the page:
UHF TV Bandpass Filter (432MHz reject)
I use a 144MHz filter in the broadcast radio aerial and the 430MHz filter
in the TV downlead. Then combine both downleads into a distribution amp.
All the bits are fitted inside an old biscuit tin with clampon ferrites
as feed-throughs.
It is not perfect but does reduce the interference to an acceptable level,
i.e. the rest of the family does not notice it.
It is worth noting that digital TV is _much_ less tolerant of interference
than the analogue system.
--
73 de g1sog
Richard
prev parent reply other threads:[~2005-08-09 21:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-09 20:51 Filter for 430Mhz Stephen Kitchener
2005-08-09 21:11 ` Dave Platt
2005-08-09 21:33 ` Stephen Kitchener
2005-08-09 21:25 ` Richard Stearn [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42F91F50.9090509@rns-stearn.demon.co.uk \
--to=richard@rns-stearn.demon.co.uk \
--cc=linux-hams@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox