* Re: /block/uba - not working - syslog error
2004-11-20 14:05 /block/uba - not working - syslog error Milu
@ 2004-11-20 14:13 ` Kay Sievers
2004-11-20 15:33 ` Milu
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Kay Sievers @ 2004-11-20 14:13 UTC (permalink / raw)
To: linux-hotplug
On Sat, 2004-11-20 at 15:05 +0100, Milu wrote:
> I'm trying to connect USB 2.0 Multi-Slots 6-in-1 card reader to my
> computer usb1.1 port(usb version doesn't matter in this case) and I've
> got this message in syslog
The up driver does not support multi-lun devices as far as I know. You
may try the usb-storage module for that device.
> Nov 20 14:34:00 snife wait_for_sysfs[9477]: either wait_for_sysfs (udev
> 045) needs an update to handle the device
> '/devices/pci0000:00/0000:00:05.2/usb1/1-2/1-2:1.0' properly (no bus
> device link) or the sysfs-support of your device's driver needs to be
> fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
> Nov 20 14:34:00 snife wait_for_sysfs[9485]: either wait_for_sysfs (udev
> 045) needs an update to handle the device '/block/uba' properly (no bus
> device link) or the sysfs-support of your device's driver needs to be
> fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
How does "ls -l /sys/bus/usb/devices/" look?
> The same message shows whenever I'm trying to use my Transcend Pendrive
> disk in my computer.
Are these messages also printed at the first connect after a reboot?
> I'm using udev 045 on Gentoo. These devices are 100% working(under
> deprecated devfs without problems)
These messages are just telling you that something is wrong with the
sysfs representation of the device. But it should work anyway.
Thanks,
Kay
-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: /block/uba - not working - syslog error
2004-11-20 14:05 /block/uba - not working - syslog error Milu
2004-11-20 14:13 ` Kay Sievers
@ 2004-11-20 15:33 ` Milu
2004-11-20 15:53 ` Kay Sievers
2004-11-20 22:27 ` Milu
3 siblings, 0 replies; 5+ messages in thread
From: Milu @ 2004-11-20 15:33 UTC (permalink / raw)
To: linux-hotplug
[-- Attachment #1: Type: text/plain, Size: 3087 bytes --]
Dnia 20-11-2004, sob o godzinie 15:13 +0100, Kay Sievers napisał(a):
> On Sat, 2004-11-20 at 15:05 +0100, Milu wrote:
> > I'm trying to connect USB 2.0 Multi-Slots 6-in-1 card reader to my
> > computer usb1.1 port(usb version doesn't matter in this case) and I've
> > got this message in syslog
>
> The up driver does not support multi-lun devices as far as I know. You
> may try the usb-storage module for that device.
>
Well, I've got usb-storage compiled into my kernel.
> > Nov 20 14:34:00 snife wait_for_sysfs[9477]: either wait_for_sysfs (udev
> > 045) needs an update to handle the device
> > '/devices/pci0000:00/0000:00:05.2/usb1/1-2/1-2:1.0' properly (no bus
> > device link) or the sysfs-support of your device's driver needs to be
> > fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
> > Nov 20 14:34:00 snife wait_for_sysfs[9485]: either wait_for_sysfs (udev
> > 045) needs an update to handle the device '/block/uba' properly (no bus
> > device link) or the sysfs-support of your device's driver needs to be
> > fixed, please report to <linux-hotplug-devel@lists.sourceforge.net>
>
> How does "ls -l /sys/bus/usb/devices/" look?
>
When I insert Transcend USB Flash Drive I have:
Nov 20 16:20:28 snife wait_for_sysfs[4973]: either wait_for_sysfs (udev
045) needs an update to handle the device '/devices/pci0000:
00/0000:00:05.2/usb1/1-2/1-2:1.0' properly (no bus device link) or the
sysfs-support of your device's driver needs to be fixed, plea
se report to <linux-hotplug-devel@lists.sourceforge.net>
Nov 20 16:20:30 snife wait_for_sysfs[4985]: either wait_for_sysfs (udev
045) needs an update to handle the device '/block/uba' prope
rly (no bus device link) or the sysfs-support of your device's driver
needs to be fixed, please report to <linux-hotplug-devel@lists
.sourceforge.net>
Nov 20 16:20:30 snife udev[5007]: creating device node '/dev/uba'
snife ~ # ls -l /sys/bus/usb/devices/
razem 0
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-0:1.0
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-0:1.0
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-1
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-1
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-1:1.0
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-1/1-1:1.0
lrwxrwxrwx 1 root root 0 lis 20 16:19 1-1:1.1
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-1/1-1:1.1
lrwxrwxrwx 1 root root 0 lis 20 16:20 1-2
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-2
lrwxrwxrwx 1 root root 0 lis 20 16:20 1-2:1.0
-> ../../../devices/pci0000:00/0000:00:05.2/usb1/1-2/1-2:1.0
lrwxrwxrwx 1 root root 0 lis 20 16:19 usb1
-> ../../../devices/pci0000:00/0000:00:05.2/usb1
The Kingston DataTraveler works fine Transcend not :/
It doesn't matter without restart or with restart - situation with Flash
Drive is the same but restart was partialy helpful for multicard reader
- it doesnt claim about this syslog message
So for now I should wait for udev handling multi lun devices?
Thanks,
Milu
--
Pozdrawiam / Best Regards
Maciej Milewski
[-- Attachment #2: To jest część listu podpisana cyfrowo --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: /block/uba - not working - syslog error
2004-11-20 14:05 /block/uba - not working - syslog error Milu
2004-11-20 14:13 ` Kay Sievers
2004-11-20 15:33 ` Milu
@ 2004-11-20 15:53 ` Kay Sievers
2004-11-20 22:27 ` Milu
3 siblings, 0 replies; 5+ messages in thread
From: Kay Sievers @ 2004-11-20 15:53 UTC (permalink / raw)
To: linux-hotplug
On Sat, 2004-11-20 at 16:33 +0100, Milu wrote:
> Dnia 20-11-2004, sob o godzinie 15:13 +0100, Kay Sievers napisał(a):
> > On Sat, 2004-11-20 at 15:05 +0100, Milu wrote:
> > > I'm trying to connect USB 2.0 Multi-Slots 6-in-1 card reader to my
> > > computer usb1.1 port(usb version doesn't matter in this case) and I've
> > > got this message in syslog
> >
> > The up driver does not support multi-lun devices as far as I know. You
> > may try the usb-storage module for that device.
> >
> Well, I've got usb-storage compiled into my kernel.
Please try without the ub module if the same errors happen.
> So for now I should wait for udev handling multi lun devices?
No, udev does only care what sysfs presents and if the driver creates
the devices in the kernel, udev will handle it well.
Kay
-------------------------------------------------------
This SF.Net email is sponsored by: InterSystems CACHE
FREE OODBMS DOWNLOAD - A multidimensional database that combines
robust object and relational technologies, making it a perfect match
for Java, C++,COM, XML, ODBC and JDBC. www.intersystems.com/match8
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: /block/uba - not working - syslog error
2004-11-20 14:05 /block/uba - not working - syslog error Milu
` (2 preceding siblings ...)
2004-11-20 15:53 ` Kay Sievers
@ 2004-11-20 22:27 ` Milu
3 siblings, 0 replies; 5+ messages in thread
From: Milu @ 2004-11-20 22:27 UTC (permalink / raw)
To: linux-hotplug
[-- Attachment #1: Type: text/plain, Size: 636 bytes --]
Dnia 20-11-2004, sob o godzinie 16:53 +0100, Kay Sievers napisał(a):
> Please try without the ub module if the same errors happen.
>
Without ub works much better - everything is right.
I forgot about this driver in kernel when I was moving from devfs to
udev.
> > So for now I should wait for udev handling multi lun devices?
>
> No, udev does only care what sysfs presents and if the driver creates
> the devices in the kernel, udev will handle it well.
OK. This was only driver issue - wrong driver for the device.
Big thanks for help. The problem is now solved.
--
Pozdrawiam / Best Regards
Maciej Milewski
[-- Attachment #2: To jest część listu podpisana cyfrowo --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread