Re: [PATCH 2/3] k10temp: Remove residues of current and voltage

[Guenter Roeck <linux@roeck-us.net>]

On Thu, Sep 02, 2021 at 11:11:54PM +0530, Naveen Krishna Chatradhi wrote:
> From: suma hegde <suma.hegde@amd.com>
> 
> Commit id "b00647c46c9d7f6ee1ff6aaf335906101755e614",
> adds reporting current and voltage to k10temp.c
> 
> The commit id "0a4e668b5d52eed8026f5d717196b02b55fb2dc6",
> removed reporting current and voltage from k10temp.c
> 
> The curr and in(voltage) entries are not removed from
> "k10temp_info" structure. Removing those residue entries.
> while at it, update k10temp driver documentation
> 
> Signed-off-by: suma hegde <suma.hegde@amd.com>
> Cc: Guenter Roeck <linux@roeck-us.net>

Applied.

> ---
> This is an unrelated change, should we submit this seperately or drop this for now?
> 
Guess the above answers your question.

Thanks,
Guenter

>  Documentation/hwmon/k10temp.rst | 17 -----------------
>  drivers/hwmon/k10temp.c         |  6 ------
>  2 files changed, 23 deletions(-)
> 
> diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst
> index 8557e26281c3..91b99adc6c48 100644
> --- a/Documentation/hwmon/k10temp.rst
> +++ b/Documentation/hwmon/k10temp.rst
> @@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report
>  Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported
>  as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU
>  variant.
> -
> -Various Family 17h and 18h CPUs report voltage and current telemetry
> -information. The following attributes may be reported.
> -
> -Attribute	Label	Description
> -===============	=======	================
> -in0_input	Vcore	Core voltage
> -in1_input	Vsoc	SoC voltage
> -curr1_input	Icore	Core current
> -curr2_input	Isoc	SoC current
> -===============	=======	================
> -
> -Current values are raw (unscaled) as reported by the CPU. Core current is
> -reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A
> -/ LSB. The real current is board specific. Reported currents should be seen
> -as rough guidance, and should be scaled using sensors3.conf as appropriate
> -for a given board.
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index 38bc35ac8135..3618a924e78e 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -362,12 +362,6 @@ static const struct hwmon_channel_info *k10temp_info[] = {
>  			   HWMON_T_INPUT | HWMON_T_LABEL,
>  			   HWMON_T_INPUT | HWMON_T_LABEL,
>  			   HWMON_T_INPUT | HWMON_T_LABEL),
> -	HWMON_CHANNEL_INFO(in,
> -			   HWMON_I_INPUT | HWMON_I_LABEL,
> -			   HWMON_I_INPUT | HWMON_I_LABEL),
> -	HWMON_CHANNEL_INFO(curr,
> -			   HWMON_C_INPUT | HWMON_C_LABEL,
> -			   HWMON_C_INPUT | HWMON_C_LABEL),
>  	NULL
>  };
>