Linux Hardware Monitor development
 help / color / mirror / Atom feed
From: Akshay Gupta <akshay.gupta@amd.com>
To: <linux-hwmon@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <linux@roeck-us.net>, <gregkh@linuxfoundation.org>,
	<arnd@arndb.de>, <naveenkrishna.chatradhi@amd.com>,
	Akshay Gupta <akshay.gupta@amd.com>
Subject: [PATCH v3 4/8] misc: amd-sbi: Add support for mailbox error codes
Date: Wed, 14 Aug 2024 09:59:49 +0000	[thread overview]
Message-ID: <20240814095954.2359863-5-akshay.gupta@amd.com> (raw)
In-Reply-To: <20240814095954.2359863-1-akshay.gupta@amd.com>

APML mailbox protocol returns additional error codes written by
SMU firmware in the out-bound register 0x37. These errors include,
invalid core, message not supported over platform and
others. This additional error codes can be used to provide more
details to userspace.

Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
---
Changes since v1:
- bifurcated from previous patch 5

 drivers/misc/amd-sbi/rmi-core.c | 12 +++++++++++-
 include/uapi/misc/amd-apml.h    |  4 ++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/amd-sbi/rmi-core.c b/drivers/misc/amd-sbi/rmi-core.c
index 2a59a3501f34..a6364337dc5e 100644
--- a/drivers/misc/amd-sbi/rmi-core.c
+++ b/drivers/misc/amd-sbi/rmi-core.c
@@ -27,13 +27,15 @@
 int rmi_mailbox_xfer(struct sbrmi_data *data,
 		     struct apml_message *msg)
 {
-	unsigned int bytes;
+	unsigned int bytes, ec;
 	int i, ret, retry = 10;
 	int sw_status;
 	u8 byte;
 
 	mutex_lock(&data->lock);
 
+	msg->fw_ret_code = 0;
+
 	/* Indicate firmware a command is to be serviced */
 	ret = regmap_write(data->regmap, SBRMI_INBNDMSG7, START_CMD);
 	if (ret < 0)
@@ -85,6 +87,9 @@ int rmi_mailbox_xfer(struct sbrmi_data *data,
 		goto exit_unlock;
 	}
 
+	ret = regmap_read(data->regmap, SBRMI_OUTBNDMSG7, &ec);
+	if (ret || ec)
+		goto exit_clear_alert;
 	/*
 	 * For a read operation, the initiator (BMC) reads the firmware
 	 * response Command Data Out[31:0] from SBRMI::OutBndMsg_inst[4:1]
@@ -100,12 +105,17 @@ int rmi_mailbox_xfer(struct sbrmi_data *data,
 		}
 	}
 
+exit_clear_alert:
 	/*
 	 * BMC must write 1'b1 to SBRMI::Status[SwAlertSts] to clear the
 	 * ALERT to initiator
 	 */
 	ret = regmap_write(data->regmap, SBRMI_STATUS,
 			   sw_status | SW_ALERT_MASK);
+	if (ec) {
+		ret = -EPROTOTYPE;
+		msg->fw_ret_code = ec;
+	}
 exit_unlock:
 	mutex_unlock(&data->lock);
 	return ret;
diff --git a/include/uapi/misc/amd-apml.h b/include/uapi/misc/amd-apml.h
index ae597942e172..b2d711d422cb 100644
--- a/include/uapi/misc/amd-apml.h
+++ b/include/uapi/misc/amd-apml.h
@@ -38,6 +38,10 @@ struct apml_message {
 		__u32 mb_in[2];
 		__u8 reg_in[8];
 	} data_in;
+	/*
+	 * Error code is returned in case of soft mailbox
+	 */
+	__u32 fw_ret_code;
 } __attribute__((packed));
 
 /* ioctl command for mailbox msgs using generic _IOWR */
-- 
2.44.0


  parent reply	other threads:[~2024-08-14 10:00 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-14  9:59 [PATCH v3 0/8] misc: Add AMD side band interface(SBI) functionality Akshay Gupta
2024-08-14  9:59 ` [PATCH v3 1/8] hwmon/misc: amd-sbi: Move core sbrmi from hwmon to misc Akshay Gupta
2024-08-14 13:35   ` Guenter Roeck
2024-08-14  9:59 ` [PATCH v3 2/8] misc: amd-sbi: Use regmap subsystem Akshay Gupta
2024-08-14  9:59 ` [PATCH v3 3/8] misc: amd-sbi: Add support for AMD_SBI IOCTL Akshay Gupta
2024-08-14  9:59 ` Akshay Gupta [this message]
2024-08-14  9:59 ` [PATCH v3 5/8] misc: amd-sbi: Add support for CPUID protocol Akshay Gupta
2024-08-19 10:27   ` Arnd Bergmann
2024-08-21 14:11     ` Gupta, Akshay
2024-08-14  9:59 ` [PATCH v3 6/8] misc: amd-sbi: Add support for MCA register protocol Akshay Gupta
2024-08-14  9:59 ` [PATCH v3 7/8] misc: amd-sbi: Add supoort for register xfer Akshay Gupta
2024-08-14  9:59 ` [PATCH v3 8/8] misc: amd-sbi: Add document for AMD SB IOCTL description Akshay Gupta
2024-08-14 10:33   ` Greg KH
2024-08-19 10:15     ` Gupta, Akshay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240814095954.2359863-5-akshay.gupta@amd.com \
    --to=akshay.gupta@amd.com \
    --cc=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=naveenkrishna.chatradhi@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox