[PATCH 1/2] dt-bindings: hwmon: (pmbus/adp1050): Support adp1051 and adp1055: add bindings.

[Alexis Cezar Torreno <alexisczezar.torreno@analog.com>]

Add dt-bindings for adp1051 and adp1055 pmbus.
ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature

Signed-off-by: Alexis Cezar Torreno <alexisczezar.torreno@analog.com>
---
 .../devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
index 10c2204bc3df..88aaa29b3bd1 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
@@ -10,16 +10,24 @@ maintainers:
   - Radu Sabau <radu.sabau@analog.com>
 
 description: |
-   The ADP1050 is used to monitor system voltages, currents and temperatures.
+   The ADP1050 and similar devices are used to monitor system voltages,
+   currents, power, and temperatures.
+
    Through the PMBus interface, the ADP1050 targets isolated power supplies
    and has four individual monitors for input/output voltage, input current
    and temperature.
    Datasheet:
      https://www.analog.com/en/products/adp1050.html
+     https://www.analog.com/en/products/adp1051.html
+     https://www.analog.com/en/products/adp1055.html
 
 properties:
+
   compatible:
-    const: adi,adp1050
+    enum:
+      - adi,adp1050
+      - adi,adp1051
+      - adi,adp1055
 
   reg:
     maxItems: 1
-- 
2.34.1