Re: [PATCH] hwmon: (nct6683) Add customer ID for ASRock X600DC-ITX

[sashiko-bot@kernel.org]

> From: Samuel Herdman <lk.gzpc0@passmail.com>
> 
> The ASRock X600DC-ITX (BIOS 2.02) has an NCT6686D with customer ID
> 0x165f, which the driver does not know, so it only binds with force=1:
> 
>   nct6683: Found NCT6686D or compatible chip at 0x2e:0xa20
>   nct6683 nct6683.2592: Enabling support for unknown customer ID 0x165f
>   nct6683 nct6683.2592: NCT6686D EC firmware version 1.0 build 12/23/25
> 
> The change:
> 
> Add the customer ID so the driver binds on this board without force=1,
> and add the board to the list of tested boards.
> 
> Tests:
> 
> - With force=1 the readings are plausible: the CPU temperature (AMD TSI
>   Addr 98h) is within a few degrees of k10temp's Tctl, VCC, VSB and
>   AVSB read 3.36 V, VBAT reads 3.2 V, and fan1 reads about 1450 RPM.
> - With the same change applied to v7.3.3 on this board, the driver
>   binds without force=1 and reports temperature and fan readings.
> 
> The patch and this changelog were drafted with an AI coding assistant
> (Claude Code); I reviewed them and ran the tests above on my board.
> 
> Signed-off-by: Samuel Herdman <lk.gzpc0@passmail.com>

Sashiko has reviewed this patch and found no issues.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261114-nct6683-asrock-x600dc-itx-v1-1-cbccf1a627fe@passmail.com?part=1