[PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[Michael Kelley]

pcibios_root_bridge_prepare() currently has code to handle Hyper-V
guest root bridges with the sysdata parent field set to NULL. While
this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
Support root bridge preparation for Hyper-V") was accepted, more
recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
device to PCI device") always sets the sysdata parent field to a
non-NULL value.

No harm is caused by leaving the special case in place, even
though it is no longer needed. But in the interest of overall
code cleanliness, remove it.

Signed-off-by: Michael Kelley <mhklinux@outlook.com>
---
This patch does not just do a revert of 7d40c0f70d92 because
an intervening commit moved the code to a new source code
file.

 drivers/pci/pci-acpi.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 42d545edd7fa..452a90317c58 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -1572,17 +1572,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 		return 0;
 
 	cfg = bridge->bus->sysdata;
-
-	/*
-	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
-	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
-	 * NULL in this case because there is no proper ACPI device.
-	 */
-	if (!cfg->parent)
-		adev = NULL;
-	else
-		adev = to_acpi_device(cfg->parent);
-
+	adev = to_acpi_device(cfg->parent);
 	bus_dev = &bridge->bus->dev;
 
 	ACPI_COMPANION_SET(&bridge->dev, adev);
-- 
2.25.1

Re: [PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[Rafael J. Wysocki (Intel)]

On Tue, Sep 29, 2026 at 8:11 PM Michael Kelley <mhkelley58@gmail.com> wrote:
>
> pcibios_root_bridge_prepare() currently has code to handle Hyper-V
> guest root bridges with the sysdata parent field set to NULL. While
> this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
> Support root bridge preparation for Hyper-V") was accepted, more
> recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
> device to PCI device") always sets the sysdata parent field to a
> non-NULL value.
>
> No harm is caused by leaving the special case in place, even
> though it is no longer needed. But in the interest of overall
> code cleanliness, remove it.
>
> Signed-off-by: Michael Kelley <mhklinux@outlook.com>

Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>

> ---
> This patch does not just do a revert of 7d40c0f70d92 because
> an intervening commit moved the code to a new source code
> file.
>
>  drivers/pci/pci-acpi.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
>
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 42d545edd7fa..452a90317c58 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -1572,17 +1572,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
>                 return 0;
>
>         cfg = bridge->bus->sysdata;
> -
> -       /*
> -        * On Hyper-V there is no corresponding ACPI device for a root bridge,
> -        * therefore ->parent is set as NULL by the driver. And set 'adev' as
> -        * NULL in this case because there is no proper ACPI device.
> -        */
> -       if (!cfg->parent)
> -               adev = NULL;
> -       else
> -               adev = to_acpi_device(cfg->parent);
> -
> +       adev = to_acpi_device(cfg->parent);
>         bus_dev = &bridge->bus->dev;
>
>         ACPI_COMPANION_SET(&bridge->dev, adev);
> --
> 2.25.1
>

RE: [PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[Michael Kelley]

From: Rafael J. Wysocki (Intel) <rafael@kernel.org> Sent: Tuesday, September 29, 2026 11:23 AM
> 
> On Tue, Sep 29, 2026 at 8:11 PM Michael Kelley <mhkelley58@gmail.com> wrote:
> >
> > pcibios_root_bridge_prepare() currently has code to handle Hyper-V
> > guest root bridges with the sysdata parent field set to NULL. While
> > this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
> > Support root bridge preparation for Hyper-V") was accepted, more
> > recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
> > device to PCI device") always sets the sysdata parent field to a
> > non-NULL value.
> >
> > No harm is caused by leaving the special case in place, even
> > though it is no longer needed. But in the interest of overall
> > code cleanliness, remove it.
> >
> > Signed-off-by: Michael Kelley <mhklinux@outlook.com>
> 
> Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>

Is anything else needed for this patch?  I presume it should
be picked up in the PCI tree.

Michael

> 
> > ---
> > This patch does not just do a revert of 7d40c0f70d92 because
> > an intervening commit moved the code to a new source code
> > file.
> >
> >  drivers/pci/pci-acpi.c | 12 +-----------
> >  1 file changed, 1 insertion(+), 11 deletions(-)
> >
> > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > index 42d545edd7fa..452a90317c58 100644
> > --- a/drivers/pci/pci-acpi.c
> > +++ b/drivers/pci/pci-acpi.c
> > @@ -1572,17 +1572,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> >                 return 0;
> >
> >         cfg = bridge->bus->sysdata;
> > -
> > -       /*
> > -        * On Hyper-V there is no corresponding ACPI device for a root bridge,
> > -        * therefore ->parent is set as NULL by the driver. And set 'adev' as
> > -        * NULL in this case because there is no proper ACPI device.
> > -        */
> > -       if (!cfg->parent)
> > -               adev = NULL;
> > -       else
> > -               adev = to_acpi_device(cfg->parent);
> > -
> > +       adev = to_acpi_device(cfg->parent);
> >         bus_dev = &bridge->bus->dev;
> >
> >         ACPI_COMPANION_SET(&bridge->dev, adev);
> > --
> > 2.25.1
> >

Re: [PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[Rafael J. Wysocki (Intel)]

On Thu, Oct 22, 2026 at 7:14 PM Michael Kelley <mhklinux@outlook.com> wrote:
>
> From: Rafael J. Wysocki (Intel) <rafael@kernel.org> Sent: Tuesday, September 29, 2026 11:23 AM
> >
> > On Tue, Sep 29, 2026 at 8:11 PM Michael Kelley <mhkelley58@gmail.com> wrote:
> > >
> > > pcibios_root_bridge_prepare() currently has code to handle Hyper-V
> > > guest root bridges with the sysdata parent field set to NULL. While
> > > this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
> > > Support root bridge preparation for Hyper-V") was accepted, more
> > > recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
> > > device to PCI device") always sets the sysdata parent field to a
> > > non-NULL value.
> > >
> > > No harm is caused by leaving the special case in place, even
> > > though it is no longer needed. But in the interest of overall
> > > code cleanliness, remove it.
> > >
> > > Signed-off-by: Michael Kelley <mhklinux@outlook.com>
> >
> > Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
>
> Is anything else needed for this patch?  I presume it should
> be picked up in the PCI tree.

Right.

I can pick it up, but then I'd rather have an ACK from Bjorn.  Or we
can try asking directly:

Bjorn, if you have any objections or concerns regarding this, please
let me know.

> >
> > > ---
> > > This patch does not just do a revert of 7d40c0f70d92 because
> > > an intervening commit moved the code to a new source code
> > > file.
> > >
> > >  drivers/pci/pci-acpi.c | 12 +-----------
> > >  1 file changed, 1 insertion(+), 11 deletions(-)
> > >
> > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > > index 42d545edd7fa..452a90317c58 100644
> > > --- a/drivers/pci/pci-acpi.c
> > > +++ b/drivers/pci/pci-acpi.c
> > > @@ -1572,17 +1572,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> > >                 return 0;
> > >
> > >         cfg = bridge->bus->sysdata;
> > > -
> > > -       /*
> > > -        * On Hyper-V there is no corresponding ACPI device for a root bridge,
> > > -        * therefore ->parent is set as NULL by the driver. And set 'adev' as
> > > -        * NULL in this case because there is no proper ACPI device.
> > > -        */
> > > -       if (!cfg->parent)
> > > -               adev = NULL;
> > > -       else
> > > -               adev = to_acpi_device(cfg->parent);
> > > -
> > > +       adev = to_acpi_device(cfg->parent);
> > >         bus_dev = &bridge->bus->dev;
> > >
> > >         ACPI_COMPANION_SET(&bridge->dev, adev);
> > > --
> > > 2.25.1
> > >
>

Re: [PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[sashiko-bot]

> pcibios_root_bridge_prepare() currently has code to handle Hyper-V
> guest root bridges with the sysdata parent field set to NULL. While
> this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
> Support root bridge preparation for Hyper-V") was accepted, more
> recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
> device to PCI device") always sets the sysdata parent field to a
> non-NULL value.
> 
> No harm is caused by leaving the special case in place, even
> though it is no longer needed. But in the interest of overall
> code cleanliness, remove it.
> 
> Signed-off-by: Michael Kelley <mhklinux@outlook.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260929181056.4746-1-mhklinux@outlook.com?part=1

Re: [PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[Saurabh Singh Sengar]

On Tue, Sep 29, 2026 at 11:10:56AM -0700, Michael Kelley wrote:
> pcibios_root_bridge_prepare() currently has code to handle Hyper-V
> guest root bridges with the sysdata parent field set to NULL. While
> this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
> Support root bridge preparation for Hyper-V") was accepted, more
> recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
> device to PCI device") always sets the sysdata parent field to a
> non-NULL value.
> 
> No harm is caused by leaving the special case in place, even
> though it is no longer needed. But in the interest of overall
> code cleanliness, remove it.
> 
> Signed-off-by: Michael Kelley <mhklinux@outlook.com>
> ---
> This patch does not just do a revert of 7d40c0f70d92 because
> an intervening commit moved the code to a new source code
> file.
> 
>  drivers/pci/pci-acpi.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 42d545edd7fa..452a90317c58 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -1572,17 +1572,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
>  		return 0;
>  
>  	cfg = bridge->bus->sysdata;
> -
> -	/*
> -	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
> -	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
> -	 * NULL in this case because there is no proper ACPI device.
> -	 */
> -	if (!cfg->parent)
> -		adev = NULL;
> -	else
> -		adev = to_acpi_device(cfg->parent);
> -
> +	adev = to_acpi_device(cfg->parent);
>  	bus_dev = &bridge->bus->dev;
>  
>  	ACPI_COMPANION_SET(&bridge->dev, adev);
> -- 
> 2.25.1
>

I was trying to find a case where any new driver would have started using the NULL case
but couldn't find any.

Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> 

Re: [PATCH 1/1] PCI/ACPI: Remove Hyper-V special case in pcibios_root_bridge_prepare()

[Bjorn Helgaas]

On Tue, Sep 29, 2026 at 11:10:56AM -0700, Michael Kelley wrote:
> pcibios_root_bridge_prepare() currently has code to handle Hyper-V
> guest root bridges with the sysdata parent field set to NULL. While
> this special case existed when commit 7d40c0f70d92 ("arm64: PCI:
> Support root bridge preparation for Hyper-V") was accepted, more
> recent commit 8d21732475c6 ("PCI: hv: Propagate coherence from VMbus
> device to PCI device") always sets the sysdata parent field to a
> non-NULL value.
> 
> No harm is caused by leaving the special case in place, even
> though it is no longer needed. But in the interest of overall
> code cleanliness, remove it.
> 
> Signed-off-by: Michael Kelley <mhklinux@outlook.com>

Applied to pci/pending/controller/hv for v7.5, thanks!  The branch
will be renamed and rebased to v7.4-rc1 after that is tagged.

> ---
> This patch does not just do a revert of 7d40c0f70d92 because
> an intervening commit moved the code to a new source code
> file.
> 
>  drivers/pci/pci-acpi.c | 12 +-----------
>  1 file changed, 1 insertion(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 42d545edd7fa..452a90317c58 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -1572,17 +1572,7 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
>  		return 0;
>  
>  	cfg = bridge->bus->sysdata;
> -
> -	/*
> -	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
> -	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
> -	 * NULL in this case because there is no proper ACPI device.
> -	 */
> -	if (!cfg->parent)
> -		adev = NULL;
> -	else
> -		adev = to_acpi_device(cfg->parent);
> -
> +	adev = to_acpi_device(cfg->parent);
>  	bus_dev = &bridge->bus->dev;
>  
>  	ACPI_COMPANION_SET(&bridge->dev, adev);
> -- 
> 2.25.1
>