* [PATCH 1/3] [I2C]: add AD5252 chip driver
[not found] ` <1201687796-987-1-git-send-email-bryan.wu-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
@ 2008-01-30 10:09 ` Bryan Wu
2008-01-30 10:09 ` [PATCH 2/3] [I2C] add PCA9543 " Bryan Wu
2008-01-30 10:09 ` [PATCH 3/3] [I2C] ID: add I2C Blackfin HW ID Bryan Wu
2 siblings, 0 replies; 6+ messages in thread
From: Bryan Wu @ 2008-01-30 10:09 UTC (permalink / raw)
To: khali-PUYAD+kWke1g9hUCZPvPmw, i2c-GZX6beZjE8VD60Wz+7aTrA; +Cc: Bryan Wu
Signed-off-by: Bryan Wu <bryan.wu-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
---
drivers/i2c/chips/Kconfig | 7 ++
drivers/i2c/chips/Makefile | 1 +
drivers/i2c/chips/ad5252.c | 252 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c-id.h | 1 +
4 files changed, 261 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/chips/ad5252.c
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index bd7082c..bb8c253 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -14,6 +14,13 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
+config SENSORS_AD5252
+ tristate "Analog Devices AD5252 and AD5251 Digital Potentiometers"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Analog Devices and AD5252
+ AD5251 chips.
+
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 501f00c..a1e1f5f 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -2,6 +2,7 @@
# Makefile for miscellaneous I2C chip drivers.
#
+obj-$(CONFIG_SENSORS_AD5252) += ad5252.o
obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
diff --git a/drivers/i2c/chips/ad5252.c b/drivers/i2c/chips/ad5252.c
new file mode 100644
index 0000000..188795a
--- /dev/null
+++ b/drivers/i2c/chips/ad5252.c
@@ -0,0 +1,252 @@
+/*
+ ad5252.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+
+ Driver for dual digitally controlled potentiometers
+
+ Copyright (c) 2006 Michael Hennerich <hennerich-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org>
+
+ derived from pcf8547.c
+
+ Copyright (c) 2000 Frodo Looijaard <frodol-B0qZmFHriGg@public.gmane.org>,
+ Philip Edelbrock <phil-KXOFo5pg7o1l57MIdRCFDg@public.gmane.org>,
+ Dan Eaton <dan.eaton-RtyX3GHucphnQYSypqKXDg@public.gmane.org>
+ Ported to Linux 2.6 by Aurelien Jarno <aurel32-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org> with
+ the help of Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
+
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(ad5252);
+
+/* Initial values */
+#define AD5252_INIT 128 /* Wiper in middle position */
+/* Each client has this additional data */
+struct ad5252_data {
+ struct i2c_client client;
+
+ u8 read, write; /* Register values */
+};
+
+static int ad5252_attach_adapter(struct i2c_adapter *adapter);
+static int ad5252_detect(struct i2c_adapter *adapter, int address, int kind);
+static int ad5252_detach_client(struct i2c_client *client);
+static void ad5252_init_client(struct i2c_client *client);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ad5252_driver = {
+ .driver = {
+ .name = "ad5252",
+ },
+ .id = I2C_DRIVERID_AD5252,
+ .attach_adapter = ad5252_attach_adapter,
+ .detach_client = ad5252_detach_client,
+};
+
+/* following are the sysfs callback functions */
+static ssize_t show_read_w1(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%u\n", i2c_smbus_read_byte_data(client,0x1));
+}
+
+static DEVICE_ATTR(read_w1, S_IRUGO, show_read_w1, NULL);
+
+static ssize_t show_read_w3(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%u\n", i2c_smbus_read_byte_data(client,0x3));
+}
+
+static DEVICE_ATTR(read_w3, S_IRUGO, show_read_w3, NULL);
+
+static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct ad5252_data *data = i2c_get_clientdata(to_i2c_client(dev));
+ return sprintf(buf, "%u\n", data->write);
+}
+
+static ssize_t set_write_w1(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ad5252_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ if (val > 0xff)
+ return -EINVAL;
+
+ data->write = val;
+
+ i2c_smbus_write_byte_data(client,0x1, data->write);
+ return count;
+}
+
+static DEVICE_ATTR(write_w1, S_IWUSR | S_IRUGO, show_write, set_write_w1);
+
+static ssize_t set_write_w3(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ad5252_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ if (val > 0xff)
+ return -EINVAL;
+
+ data->write = val;
+
+ i2c_smbus_write_byte_data(client,0x3, data->write);
+ return count;
+}
+
+static DEVICE_ATTR(write_w3, S_IWUSR | S_IRUGO, show_write, set_write_w3);
+
+/*
+ * Real code
+ */
+
+static int ad5252_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, ad5252_detect);
+}
+
+/* This function is called by i2c_detect */
+int ad5252_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct ad5252_data *data;
+ int err = 0;
+ const char *client_name = "";
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet. */
+ if (!(data = kzalloc(sizeof(struct ad5252_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &ad5252_driver;
+ new_client->flags = 0;
+
+ /* Determine the chip type */
+ if (kind <= 0) {
+ if (address >= 0x2c && address <= 0x2f)
+ kind = ad5252;
+
+ }
+
+ client_name = "ad5252";
+
+ /* Fill in the remaining client fields and put it into the global list */
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+
+ /*FIXME: Don't know why there needs to be a delay !!!*/
+ udelay(100);
+
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_free;
+
+ /* Initialize the AD5252 chip */
+ ad5252_init_client(new_client);
+
+ /* Register sysfs hooks */
+ err = device_create_file(&new_client->dev, &dev_attr_read_w1);
+ err |= device_create_file(&new_client->dev, &dev_attr_read_w3);
+ err |= device_create_file(&new_client->dev, &dev_attr_write_w1);
+ err |= device_create_file(&new_client->dev, &dev_attr_write_w3);
+
+ if (err)
+ printk(KERN_WARNING "AD5252: failed to register sysfs hooks\n");
+
+ printk(KERN_INFO "AD5252 Attached\n");
+ return 0;
+
+/* OK, this is not exactly good programming practice, usually. But it is
+ very code-efficient in this case. */
+
+ exit_free:
+ kfree(data);
+ exit:
+ printk(KERN_INFO "AD5252 attaching failed\n");
+ return err;
+}
+
+static int ad5252_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev,
+ "Client deregistration failed, client not detached.\n");
+ return err;
+ }
+
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+/* Called when we have found a new AD5252. */
+static void ad5252_init_client(struct i2c_client *client)
+{
+ //struct ad5252_data *data = i2c_get_clientdata(client);
+ //data->write = AD5252_INIT;
+ //i2c_smbus_write_byte_data(client,0x1, data->write);
+ //i2c_smbus_write_byte_data(client,0x3, data->write);
+}
+
+static int __init ad5252_init(void)
+{
+ return i2c_add_driver(&ad5252_driver);
+}
+
+static void __exit ad5252_exit(void)
+{
+ i2c_del_driver(&ad5252_driver);
+}
+
+
+MODULE_AUTHOR
+ ("Michael Hennerich <hennerich-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org>, "
+ "Frodo Looijaard <frodol-B0qZmFHriGg@public.gmane.org>, "
+ "Philip Edelbrock <phil-KXOFo5pg7o1l57MIdRCFDg@public.gmane.org>, "
+ "Dan Eaton <dan.eaton-RtyX3GHucphnQYSypqKXDg@public.gmane.org> "
+ "and Aurelien Jarno <aurelien-rXXEIb44qovR7s880joybQ@public.gmane.org>");
+MODULE_DESCRIPTION("AD5252 digital potentiometer driver");
+MODULE_LICENSE("GPL");
+
+module_init(ad5252_init);
+module_exit(ad5252_exit);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index f922b06..67d639d 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -133,6 +133,7 @@
#define I2C_DRIVERID_FSCHER 1046
#define I2C_DRIVERID_W83L785TS 1047
#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */
+#define I2C_DRIVERID_AD5252 1049
/*
* ---- Adapter types ----------------------------------------------------
--
1.5.3.4
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/3] [I2C] add PCA9543 chip driver
[not found] ` <1201687796-987-1-git-send-email-bryan.wu-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
2008-01-30 10:09 ` [PATCH 1/3] [I2C]: add AD5252 chip driver Bryan Wu
@ 2008-01-30 10:09 ` Bryan Wu
2008-01-30 10:09 ` [PATCH 3/3] [I2C] ID: add I2C Blackfin HW ID Bryan Wu
2 siblings, 0 replies; 6+ messages in thread
From: Bryan Wu @ 2008-01-30 10:09 UTC (permalink / raw)
To: khali-PUYAD+kWke1g9hUCZPvPmw, i2c-GZX6beZjE8VD60Wz+7aTrA; +Cc: Bryan Wu
Signed-off-by: Bryan Wu <bryan.wu-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
---
drivers/i2c/chips/Kconfig | 13 +++
drivers/i2c/chips/Makefile | 1 +
drivers/i2c/chips/pca9543.c | 212 +++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c-id.h | 1 +
4 files changed, 227 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/chips/pca9543.c
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index bb8c253..9f05f6f 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -60,6 +60,19 @@ config PCF8575
This device is hard to detect and is rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PCA9543
+ tristate "Philips PCA9543 bi-directional translating switch"
+ depends on I2C && EXPERIMENTAL
+ default n
+ help
+ If you say yes here you get support for Philips PCA9543.
+
+ This driver can also be built as a module. If so, the module
+ will be called pca9543.
+
+ These devices are hard to detect and rarely found on mainstream
+ hardware. If unsure, say N.
+
config SENSORS_PCA9539
tristate "Philips PCA9539 16-bit I/O port"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index a1e1f5f..d5a1d98 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
+obj-$(CONFIG_SENSORS_PCA9543) += pca9543.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
diff --git a/drivers/i2c/chips/pca9543.c b/drivers/i2c/chips/pca9543.c
new file mode 100644
index 0000000..dc19638
--- /dev/null
+++ b/drivers/i2c/chips/pca9543.c
@@ -0,0 +1,212 @@
+/*
+ pca9543.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 2000 Frodo Looijaard <frodol-B0qZmFHriGg@public.gmane.org>,
+ Philip Edelbrock <phil-KXOFo5pg7o1l57MIdRCFDg@public.gmane.org>,
+ Dan Eaton <dan.eaton-RtyX3GHucphnQYSypqKXDg@public.gmane.org>
+ Ported to Linux 2.6 by Aurelien Jarno <aurel32-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org> with
+ the help of Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
+
+ Copyright (C) 2007 Michael Hennerich, Analog Devices Inc.
+ <hennerich-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org>
+ based on the pcf8574.c
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/* A few notes about the PCA9543:
+
+* The PCA9543 is a bi-directional translating switch, controlled by the
+ I2C bus. The SCL/SDA upstream pair fans out to two downstream
+ pairs, or channels. Any individual SCx/SDx channels or combination
+ of channels can be selected, determined by the contents of the
+ programmable control register. Two interrupt inputs, INT0 to INT3,
+ one for each of the downstream pairs, are provided. One interrupt
+ output INT, which acts as an AND of the two interrupt inputs, is
+ provided.
+
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x70,0x71, 0x72, 0x73, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(pca9543);
+
+
+/* Each client has this additional data */
+struct pca9543_data {
+ struct i2c_client client;
+
+ u8 write; /* Remember last written value */
+};
+
+static int pca9543_attach_adapter(struct i2c_adapter *adapter);
+static int pca9543_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pca9543_detach_client(struct i2c_client *client);
+
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pca9543_driver = {
+ .driver = {
+ .name = "pca9543",
+ },
+ .id = I2C_DRIVERID_PCF8574,
+ .attach_adapter = pca9543_attach_adapter,
+ .detach_client = pca9543_detach_client,
+};
+
+/* following are the sysfs callback functions */
+static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
+}
+
+static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
+
+static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pca9543_data *data = i2c_get_clientdata(to_i2c_client(dev));
+ return sprintf(buf, "%u\n", data->write);
+}
+
+static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pca9543_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ if (val > 0xff)
+ return -EINVAL;
+
+ data->write = val;
+ i2c_smbus_write_byte(client, data->write);
+ return count;
+}
+
+static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
+
+static struct attribute *pca9543_attributes[] = {
+ &dev_attr_read.attr,
+ &dev_attr_write.attr,
+ NULL
+};
+
+static const struct attribute_group pca9543_attr_group = {
+ .attrs = pca9543_attributes,
+};
+
+/*
+ * Real code
+ */
+
+static int pca9543_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, pca9543_detect);
+}
+
+/* This function is called by i2c_probe */
+static int pca9543_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *new_client;
+ struct pca9543_data *data;
+ int err = 0;
+ const char *client_name = "pca9543";
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet. */
+ if (!(data = kzalloc(sizeof(struct pca9543_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &pca9543_driver;
+ new_client->flags = 0;
+
+ /* Now, we would do the remaining detection. But the PCF8574 is plainly
+ impossible to detect! Stupid chip. */
+
+ /* Fill in the remaining client fields and put it into the global list */
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_free;
+
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&new_client->dev.kobj, &pca9543_attr_group);
+ if (err)
+ goto exit_detach;
+ return 0;
+
+ exit_detach:
+ i2c_detach_client(new_client);
+ exit_free:
+ kfree(data);
+ exit:
+ return err;
+}
+
+static int pca9543_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ sysfs_remove_group(&client->dev.kobj, &pca9543_attr_group);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+
+static int __init pca9543_init(void)
+{
+ return i2c_add_driver(&pca9543_driver);
+}
+
+static void __exit pca9543_exit(void)
+{
+ i2c_del_driver(&pca9543_driver);
+}
+
+
+MODULE_AUTHOR
+ ("Frodo Looijaard <frodol-B0qZmFHriGg@public.gmane.org>, "
+ "Philip Edelbrock <phil-KXOFo5pg7o1l57MIdRCFDg@public.gmane.org>, "
+ "Dan Eaton <dan.eaton-RtyX3GHucphnQYSypqKXDg@public.gmane.org> "
+ "and Aurelien Jarno <aurelien-rXXEIb44qovR7s880joybQ@public.gmane.org>"
+ "Michael Hennerich <hennerich-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org>");
+MODULE_DESCRIPTION("PCA9543 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pca9543_init);
+module_exit(pca9543_exit);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 67d639d..6748bd2 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -134,6 +134,7 @@
#define I2C_DRIVERID_W83L785TS 1047
#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */
#define I2C_DRIVERID_AD5252 1049
+#define I2C_DRIVERID_PCF8575 1050
/*
* ---- Adapter types ----------------------------------------------------
--
1.5.3.4
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
^ permalink raw reply related [flat|nested] 6+ messages in thread