From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: "Edelhaeuser,
Frank"
<Frank.Edelhaeuser-CBC/uQSf1AZWk0Htik3J/w@public.gmane.org>
Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [PATCH] Add driver for AD7414 i2c temperature sensor
Date: Tue, 12 Feb 2008 17:25:42 +0100 [thread overview]
Message-ID: <20080212172542.210f4a78@hyperion.delvare> (raw)
In-Reply-To: <A42C17A8FF150C4DB98BFD6497D1D00007D35D66-SepvG4MK2K7XgKAwtTS8dDuQPtp/YR6JAL8bYrjMMd8@public.gmane.org>
Hi Frank,
On Fri, 1 Feb 2008 05:34:14 -0800, Edelhaeuser, Frank wrote:
> Signed-off-by: Frank Edelhaeuser <frank.edelhaeuser-CBC/uQSf1AZWk0Htik3J/w@public.gmane.org>
> ---
> diff -Nur a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> --- a/drivers/hwmon/Kconfig 2007-11-11 21:49:02.000000000 +0100
> +++ b/drivers/hwmon/Kconfig 2008-02-01 11:54:48.000000000 +0100
> @@ -57,6 +57,16 @@
> This driver can also be built as a module. If so, the module
> will be called abituguru3.
>
> +config SENSORS_AD7414
> + tristate "Analog Devices AD7414"
> + depends on I2C && EXPERIMENTAL
> + help
> + If you say yes here you get support for the Analog Devices
> + AD7414 temperature monitoring chip.
> +
> + This driver can also be built as a module. If so, the module
> + will be called ad7414.
> +
> config SENSORS_AD7418
> tristate "Analog Devices AD7416, AD7417 and AD7418"
> depends on I2C && EXPERIMENTAL
--> lm-sensors list, please.
--
Jean Delvare
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
prev parent reply other threads:[~2008-02-12 16:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-01 13:34 [PATCH] Add driver for AD7414 i2c temperature sensor Edelhaeuser, Frank
[not found] ` <A42C17A8FF150C4DB98BFD6497D1D00007D35D66-SepvG4MK2K7XgKAwtTS8dDuQPtp/YR6JAL8bYrjMMd8@public.gmane.org>
2008-02-12 16:25 ` Jean Delvare [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080212172542.210f4a78@hyperion.delvare \
--to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
--cc=Frank.Edelhaeuser-CBC/uQSf1AZWk0Htik3J/w@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox