From: akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org
To: khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org
Cc: seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: [patch 1/1] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs
Date: Wed, 20 Aug 2008 16:45:26 -0700 [thread overview]
Message-ID: <200808202345.m7KNjRBv005585@imap1.linux-foundation.org> (raw)
From: Seth Heasley <seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Add the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
Signed-off-by: Seth Heasley <seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
---
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 3 +++
2 files changed, 4 insertions(+)
diff -puN drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
+++ a/drivers/i2c/busses/Kconfig
@@ -97,6 +97,7 @@ config I2C_I801
ICH9
Tolapai
ICH10
+ PCH
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff -puN drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids drivers/i2c/busses/i2c-i801.c
--- a/drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
+++ a/drivers/i2c/busses/i2c-i801.c
@@ -41,6 +41,7 @@
Tolapai 0x5032 32 hard yes yes yes
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
+ PCH 0x3b30 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] =
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
{ 0, }
};
@@ -599,6 +601,7 @@ static int __devinit i801_probe(struct p
case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
case PCI_DEVICE_ID_INTEL_ICH10_4:
case PCI_DEVICE_ID_INTEL_ICH10_5:
+ case PCI_DEVICE_ID_INTEL_PCH_2:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
_
_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c
next reply other threads:[~2008-08-20 23:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-20 23:45 akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b [this message]
[not found] ` <200808202345.m7KNjRBv005585-AB4EexQrvXRQetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-08-21 6:44 ` [patch 1/1] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs Jean Delvare
[not found] ` <20080821084446.6cdb11d3-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-08-21 6:55 ` Andrew Morton
[not found] ` <20080820235541.da8f690c.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2008-08-21 7:05 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200808202345.m7KNjRBv005585@imap1.linux-foundation.org \
--to=akpm-de/tnxtf+jlsfhdxvbkv3wd2fqjk+8+b@public.gmane.org \
--cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox