Linux I2C development
 help / color / mirror / Atom feed
From: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
To: akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org
Cc: seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
Subject: Re: [patch 1/1] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs
Date: Thu, 21 Aug 2008 08:44:46 +0200	[thread overview]
Message-ID: <20080821084446.6cdb11d3@hyperion.delvare> (raw)
In-Reply-To: <200808202345.m7KNjRBv005585-AB4EexQrvXRQetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>

Hi Andrew,

On Wed, 20 Aug 2008 16:45:26 -0700, akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org wrote:
> From: Seth Heasley <seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> 
> Add the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
> 
> Signed-off-by: Seth Heasley <seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> Cc: Jean Delvare <khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>
> Signed-off-by: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
> ---
> 
>  drivers/i2c/busses/Kconfig    |    1 +
>  drivers/i2c/busses/i2c-i801.c |    3 +++
>  2 files changed, 4 insertions(+)

I have this patch in my tree already, but I can't export it, because it
depends on a pci_ids.h patch which is not yet in Linus' tree.

> 
> diff -puN drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids drivers/i2c/busses/Kconfig
> --- a/drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> +++ a/drivers/i2c/busses/Kconfig
> @@ -97,6 +97,7 @@ config I2C_I801
>  	    ICH9
>  	    Tolapai
>  	    ICH10
> +	    PCH
>  
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-i801.
> diff -puN drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids drivers/i2c/busses/i2c-i801.c
> --- a/drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> +++ a/drivers/i2c/busses/i2c-i801.c
> @@ -41,6 +41,7 @@
>    Tolapai               0x5032     32     hard     yes     yes     yes
>    ICH10                 0x3a30     32     hard     yes     yes     yes
>    ICH10                 0x3a60     32     hard     yes     yes     yes
> +  PCH                   0x3b30     32     hard     yes     yes     yes
>  
>    Features supported by this driver:
>    Software PEC                     no
> @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] =
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
>  	{ 0, }
>  };
>  
> @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct p
>  	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
>  	case PCI_DEVICE_ID_INTEL_ICH10_4:
>  	case PCI_DEVICE_ID_INTEL_ICH10_5:
> +	case PCI_DEVICE_ID_INTEL_PCH_2:
>  		i801_features |= FEATURE_I2C_BLOCK_READ;
>  		/* fall through */
>  	case PCI_DEVICE_ID_INTEL_82801DB_3:
> _


-- 
Jean Delvare

_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c

  parent reply	other threads:[~2008-08-21  6:44 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-20 23:45 [patch 1/1] i2c-i801: SMBus patch for Intel Ibex Peak DeviceIDs akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b
     [not found] ` <200808202345.m7KNjRBv005585-AB4EexQrvXRQetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org>
2008-08-21  6:44   ` Jean Delvare [this message]
     [not found]     ` <20080821084446.6cdb11d3-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-08-21  6:55       ` Andrew Morton
     [not found]         ` <20080820235541.da8f690c.akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
2008-08-21  7:05           ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080821084446.6cdb11d3@hyperion.delvare \
    --to=khali-puyad+kwke1g9huczpvpmw@public.gmane.org \
    --cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
    --cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    --cc=seth.heasley-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox