* [PATCH V2] Intel Lewisburg device IDs for SMBus [not found] <Intel Lewisburg device IDs for SMBus> @ 2015-11-04 19:09 ` Alexandra Yates 2015-11-05 8:45 ` Jean Delvare 0 siblings, 1 reply; 3+ messages in thread From: Alexandra Yates @ 2015-11-04 19:09 UTC (permalink / raw) To: jdelvare, linux-i2c, wsa, corbet; +Cc: Alexandra Yates Adding Intel codename Lewisburg platform device IDs for SMBus. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> --- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 6 ++++++ 3 files changed, 8 insertions(+) diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 6a4b1af..1bba38d 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -32,6 +32,7 @@ Supported adapters: * Intel Sunrise Point-LP (PCH) * Intel DNV (SOC) * Intel Broxton (SOC) + * Intel Lewisburg (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index e24c2b6..7b0aa82 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -126,6 +126,7 @@ config I2C_I801 Sunrise Point-LP (PCH) DNV (SOC) Broxton (SOC) + Lewisburg (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index c306751..76fcef4 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -62,6 +62,8 @@ * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * DNV (SOC) 0x19df 32 hard yes yes yes * Broxton (SOC) 0x5ad4 32 hard yes yes yes + * Lewisburg (PCH) 0xA1A3 32 hard yes yes yes + * Lewisburg Supersku (PCH) 0xA223 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -181,6 +183,8 @@ STATUS_ERROR_FLAGS) /* Older devices have their ID defined in <linux/pci_ids.h> */ +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xA1A3 +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xA223 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 @@ -864,6 +868,8 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, -- 1.9.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH V2] Intel Lewisburg device IDs for SMBus 2015-11-04 19:09 ` [PATCH V2] Intel Lewisburg device IDs for SMBus Alexandra Yates @ 2015-11-05 8:45 ` Jean Delvare 2015-11-05 19:42 ` Alexandra Yates 0 siblings, 1 reply; 3+ messages in thread From: Jean Delvare @ 2015-11-05 8:45 UTC (permalink / raw) To: Alexandra Yates; +Cc: linux-i2c, wsa, corbet Hi Alexandra, On Wed, 4 Nov 2015 11:09:16 -0800, Alexandra Yates wrote: > Adding Intel codename Lewisburg platform device IDs for SMBus. > > Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> > --- > Documentation/i2c/busses/i2c-i801 | 1 + > drivers/i2c/busses/Kconfig | 1 + > drivers/i2c/busses/i2c-i801.c | 6 ++++++ > 3 files changed, 8 insertions(+) > > diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 > index 6a4b1af..1bba38d 100644 > --- a/Documentation/i2c/busses/i2c-i801 > +++ b/Documentation/i2c/busses/i2c-i801 > @@ -32,6 +32,7 @@ Supported adapters: > * Intel Sunrise Point-LP (PCH) > * Intel DNV (SOC) > * Intel Broxton (SOC) > + * Intel Lewisburg (PCH) > Datasheets: Publicly available at the Intel website > > On Intel Patsburg and later chipsets, both the normal host SMBus controller > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index e24c2b6..7b0aa82 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -126,6 +126,7 @@ config I2C_I801 > Sunrise Point-LP (PCH) > DNV (SOC) > Broxton (SOC) > + Lewisburg (PCH) > > This driver can also be built as a module. If so, the module > will be called i2c-i801. > diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c > index c306751..76fcef4 100644 > --- a/drivers/i2c/busses/i2c-i801.c > +++ b/drivers/i2c/busses/i2c-i801.c > @@ -62,6 +62,8 @@ > * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes > * DNV (SOC) 0x19df 32 hard yes yes yes > * Broxton (SOC) 0x5ad4 32 hard yes yes yes > + * Lewisburg (PCH) 0xA1A3 32 hard yes yes yes > + * Lewisburg Supersku (PCH) 0xA223 32 hard yes yes yes It's a bit unfortunate that you used upper-case letters for the hexadecimal numbers when all other entries used lower-case letters. > * > * Features supported by this driver: > * Software PEC no > @@ -181,6 +183,8 @@ > STATUS_ERROR_FLAGS) > > /* Older devices have their ID defined in <linux/pci_ids.h> */ > +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xA1A3 > +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xA223 Same here. Plus, why are you adding the IDs at the top of the list here while you added them at the bottom of the first list... > #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 > #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 > #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 > @@ -864,6 +868,8 @@ static const struct pci_device_id i801_ids[] = { > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, ... and now in the middle of the last list? I would appreciate more consistency. These are all details of course, overall the changes look good, so you can add: Reviewed-by: Jean Delvare <jdelvare@suse.de> -- Jean Delvare SUSE L3 Support ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH V2] Intel Lewisburg device IDs for SMBus 2015-11-05 8:45 ` Jean Delvare @ 2015-11-05 19:42 ` Alexandra Yates 0 siblings, 0 replies; 3+ messages in thread From: Alexandra Yates @ 2015-11-05 19:42 UTC (permalink / raw) To: Jean Delvare; +Cc: linux-i2c, wsa, corbet Hi Jean, On 11/05/2015 12:45 AM, Jean Delvare wrote: > Hi Alexandra, > > On Wed, 4 Nov 2015 11:09:16 -0800, Alexandra Yates wrote: >> Adding Intel codename Lewisburg platform device IDs for SMBus. >> >> Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> >> --- >> Documentation/i2c/busses/i2c-i801 | 1 + >> drivers/i2c/busses/Kconfig | 1 + >> drivers/i2c/busses/i2c-i801.c | 6 ++++++ >> 3 files changed, 8 insertions(+) >> >> diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 >> index 6a4b1af..1bba38d 100644 >> --- a/Documentation/i2c/busses/i2c-i801 >> +++ b/Documentation/i2c/busses/i2c-i801 >> @@ -32,6 +32,7 @@ Supported adapters: >> * Intel Sunrise Point-LP (PCH) >> * Intel DNV (SOC) >> * Intel Broxton (SOC) >> + * Intel Lewisburg (PCH) >> Datasheets: Publicly available at the Intel website >> >> On Intel Patsburg and later chipsets, both the normal host SMBus controller >> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig >> index e24c2b6..7b0aa82 100644 >> --- a/drivers/i2c/busses/Kconfig >> +++ b/drivers/i2c/busses/Kconfig >> @@ -126,6 +126,7 @@ config I2C_I801 >> Sunrise Point-LP (PCH) >> DNV (SOC) >> Broxton (SOC) >> + Lewisburg (PCH) >> >> This driver can also be built as a module. If so, the module >> will be called i2c-i801. >> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c >> index c306751..76fcef4 100644 >> --- a/drivers/i2c/busses/i2c-i801.c >> +++ b/drivers/i2c/busses/i2c-i801.c >> @@ -62,6 +62,8 @@ >> * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes >> * DNV (SOC) 0x19df 32 hard yes yes yes >> * Broxton (SOC) 0x5ad4 32 hard yes yes yes >> + * Lewisburg (PCH) 0xA1A3 32 hard yes yes yes >> + * Lewisburg Supersku (PCH) 0xA223 32 hard yes yes yes > > It's a bit unfortunate that you used upper-case letters for the > hexadecimal numbers when all other entries used lower-case letters. > >> * >> * Features supported by this driver: >> * Software PEC no >> @@ -181,6 +183,8 @@ >> STATUS_ERROR_FLAGS) >> >> /* Older devices have their ID defined in <linux/pci_ids.h> */ >> +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xA1A3 >> +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xA223 > > Same here. Plus, why are you adding the IDs at the top of the list here > while you added them at the bottom of the first list... > >> #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 >> #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 >> #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 >> @@ -864,6 +868,8 @@ static const struct pci_device_id i801_ids[] = { >> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) }, >> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) }, >> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, >> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, >> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, >> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, >> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, >> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, > > ... and now in the middle of the last list? I would appreciate more > consistency. > > These are all details of course, overall the changes look good, so you > can add: > > Reviewed-by: Jean Delvare <jdelvare@suse.de> > Thank you for your review. I sent the V3 of this patch with the changes you suggested. -- Thank you, <Alexandra> ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-11-05 19:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <Intel Lewisburg device IDs for SMBus>
2015-11-04 19:09 ` [PATCH V2] Intel Lewisburg device IDs for SMBus Alexandra Yates
2015-11-05 8:45 ` Jean Delvare
2015-11-05 19:42 ` Alexandra Yates
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox