* [PATCH] arm64: dts: actions: s700: Add I2C controller nodes @ 2018-11-13 13:32 Parthiban Nallathambi 2018-11-15 11:12 ` Manivannan Sadhasivam 0 siblings, 1 reply; 3+ messages in thread From: Parthiban Nallathambi @ 2018-11-13 13:32 UTC (permalink / raw) To: afaerber, manivannan.sadhasivam, robh+dt, mark.rutland, wsa Cc: linux-arm-kernel, devicetree, linux-kernel, linux-i2c, Parthiban Nallathambi Add I2C controller nodes for Actions Semiconductor S700 SoC. Signed-off-by: Parthiban Nallathambi <pn@denx.de> --- arch/arm64/boot/dts/actions/s700.dtsi | 40 +++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi index 192c7b39c8c1..573c844d7afe 100644 --- a/arch/arm64/boot/dts/actions/s700.dtsi +++ b/arch/arm64/boot/dts/actions/s700.dtsi @@ -174,6 +174,46 @@ #clock-cells = <1>; }; + i2c0: i2c@e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e017c000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017c000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sps: power-controller@e01b0100 { compatible = "actions,s700-sps"; reg = <0x0 0xe01b0100 0x0 0x100>; -- 2.17.2 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: actions: s700: Add I2C controller nodes 2018-11-13 13:32 [PATCH] arm64: dts: actions: s700: Add I2C controller nodes Parthiban Nallathambi @ 2018-11-15 11:12 ` Manivannan Sadhasivam 2018-11-15 12:51 ` Parthiban Nallathambi 0 siblings, 1 reply; 3+ messages in thread From: Manivannan Sadhasivam @ 2018-11-15 11:12 UTC (permalink / raw) To: Parthiban Nallathambi Cc: afaerber, robh+dt, mark.rutland, wsa, linux-arm-kernel, devicetree, linux-kernel, linux-i2c Hi Parthiban, On Tue, Nov 13, 2018 at 02:32:35PM +0100, Parthiban Nallathambi wrote: > Add I2C controller nodes for Actions Semiconductor S700 SoC. > > Signed-off-by: Parthiban Nallathambi <pn@denx.de> > --- > arch/arm64/boot/dts/actions/s700.dtsi | 40 +++++++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi > index 192c7b39c8c1..573c844d7afe 100644 > --- a/arch/arm64/boot/dts/actions/s700.dtsi > +++ b/arch/arm64/boot/dts/actions/s700.dtsi > @@ -174,6 +174,46 @@ > #clock-cells = <1>; > }; > > + i2c0: i2c@e0170000 { > + compatible = "actions,s900-i2c"; Why don't you add a compatible for S700? Also, please add the pinctrl nodes for these busses and enable the ones exposed on board. These could go in a separate patch. Thanks, Mani > + reg = <0 0xe0170000 0 0x1000>; > + clocks = <&cmu CLK_I2C0>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c1: i2c@e0174000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0174000 0 0x1000>; > + clocks = <&cmu CLK_I2C1>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c2: i2c@e0178000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe0178000 0 0x1000>; > + clocks = <&cmu CLK_I2C2>; > + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + i2c3: i2c@e017c000 { > + compatible = "actions,s900-i2c"; > + reg = <0 0xe017c000 0 0x1000>; > + clocks = <&cmu CLK_I2C3>; > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > sps: power-controller@e01b0100 { > compatible = "actions,s700-sps"; > reg = <0x0 0xe01b0100 0x0 0x100>; > -- > 2.17.2 > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: dts: actions: s700: Add I2C controller nodes 2018-11-15 11:12 ` Manivannan Sadhasivam @ 2018-11-15 12:51 ` Parthiban Nallathambi 0 siblings, 0 replies; 3+ messages in thread From: Parthiban Nallathambi @ 2018-11-15 12:51 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: pn, afaerber, robh+dt, mark.rutland, wsa, linux-arm-kernel, devicetree, linux-kernel, linux-i2c On 11/15/18 12:12 PM, Manivannan Sadhasivam wrote: > Hi Parthiban, > > On Tue, Nov 13, 2018 at 02:32:35PM +0100, Parthiban Nallathambi wrote: >> Add I2C controller nodes for Actions Semiconductor S700 SoC. >> >> Signed-off-by: Parthiban Nallathambi <pn@denx.de> >> --- >> arch/arm64/boot/dts/actions/s700.dtsi | 40 +++++++++++++++++++++++++++ >> 1 file changed, 40 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi >> index 192c7b39c8c1..573c844d7afe 100644 >> --- a/arch/arm64/boot/dts/actions/s700.dtsi >> +++ b/arch/arm64/boot/dts/actions/s700.dtsi >> @@ -174,6 +174,46 @@ >> #clock-cells = <1>; >> }; >> >> + i2c0: i2c@e0170000 { >> + compatible = "actions,s900-i2c"; > > Why don't you add a compatible for S700? Also, please add the pinctrl > nodes for these busses and enable the ones exposed on board. These could > go in a separate patch. Makes sense as pinctrl is already fine. Will do in v2 as series! Thanks, Parthi > > Thanks, > Mani > >> + reg = <0 0xe0170000 0 0x1000>; >> + clocks = <&cmu CLK_I2C0>; >> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + i2c1: i2c@e0174000 { >> + compatible = "actions,s900-i2c"; >> + reg = <0 0xe0174000 0 0x1000>; >> + clocks = <&cmu CLK_I2C1>; >> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + i2c2: i2c@e0178000 { >> + compatible = "actions,s900-i2c"; >> + reg = <0 0xe0178000 0 0x1000>; >> + clocks = <&cmu CLK_I2C2>; >> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + i2c3: i2c@e017c000 { >> + compatible = "actions,s900-i2c"; >> + reg = <0 0xe017c000 0 0x1000>; >> + clocks = <&cmu CLK_I2C3>; >> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> sps: power-controller@e01b0100 { >> compatible = "actions,s700-sps"; >> reg = <0x0 0xe01b0100 0x0 0x100>; >> -- >> 2.17.2 >> > -- Thanks, Parthiban N DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-22 Fax: (+49)-8142-66989-80 Email: pn@denx.de ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-15 12:51 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-11-13 13:32 [PATCH] arm64: dts: actions: s700: Add I2C controller nodes Parthiban Nallathambi 2018-11-15 11:12 ` Manivannan Sadhasivam 2018-11-15 12:51 ` Parthiban Nallathambi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox