Re: [PATCH v2 5/9] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE

[Jean Delvare <jdelvare@suse.de>]

On Fri, 06 Aug 2021 23:15:51 +0200, Heiner Kallweit wrote:
> do_pci_enable_device() takes care that PCI_COMMAND_INTX_DISABLE
> is cleared if a legacy interrupt is used.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
>  drivers/i2c/busses/i2c-i801.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index f56060fcf..7fa06b85f 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -1827,19 +1827,12 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  		priv->features &= ~FEATURE_IRQ;
>  
>  	if (priv->features & FEATURE_IRQ) {
> -		u16 pcictl, pcists;
> +		u16 pcists;
>  
>  		/* Complain if an interrupt is already pending */
>  		pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
>  		if (pcists & PCI_STATUS_INTERRUPT)
>  			dev_warn(&dev->dev, "An interrupt is pending!\n");
> -
> -		/* Check if interrupts have been disabled */
> -		pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pcictl);
> -		if (pcictl & PCI_COMMAND_INTX_DISABLE) {
> -			dev_info(&dev->dev, "Interrupts are disabled\n");
> -			priv->features &= ~FEATURE_IRQ;
> -		}
>  	}
>  
>  	if (priv->features & FEATURE_IRQ) {

Reviewed-by: Jean Delvare <jdelvare@suse.de>

As said before, I'm not sure, but let's apply that and see if anybody
complains.

-- 
Jean Delvare
SUSE L3 Support