[PATCH] i2c: hisi: Only handle the interrupt of the driver's transfer

[Yicong Yang <yangyicong@huawei.com>]

From: Yicong Yang <yangyicong@hisilicon.com>

The controller may be shared with other port, for example the firmware.
Handle the interrupt from other sources will cause crash since some
data are not initialized. So only handle the interrupt of the driver's
transfer and discard others.

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
---
 drivers/i2c/busses/i2c-hisi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/i2c/busses/i2c-hisi.c b/drivers/i2c/busses/i2c-hisi.c
index e067671b3ce2..8328da4bc3ec 100644
--- a/drivers/i2c/busses/i2c-hisi.c
+++ b/drivers/i2c/busses/i2c-hisi.c
@@ -330,6 +330,14 @@ static irqreturn_t hisi_i2c_irq(int irq, void *context)
 	struct hisi_i2c_controller *ctlr = context;
 	u32 int_stat;
 
+	/*
+	 * Don't handle the interrupt if cltr->completion is NULL. We may
+	 * reach here because the interrupt is spurious or the transfer is
+	 * started by another port rather than us.
+	 */
+	if (!ctlr->completion)
+		return IRQ_NONE;
+
 	int_stat = readl(ctlr->iobase + HISI_I2C_INT_MSTAT);
 	hisi_i2c_clear_int(ctlr, int_stat);
 	if (!(int_stat & HISI_I2C_INT_ALL))
-- 
2.24.0