[PATCH v8 1/4] i2c: tegra: Do not configure DMA if not supported

[Kartik Rajput <kkartik@nvidia.com>]

On Tegra264, not all I2C controllers have the necessary interface to
GPC DMA, this causes failures when function tegra_i2c_init_dma()
is called.

Ensure that "dmas" device-tree property is present before initializing
DMA in function tegra_i2c_init_dma().

Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
v2 -> v4:
	* Add debug print if DMA is not supported by the I2C controller.
v1 -> v2:
	* Update commit message to clarify that some I2C controllers may
	  not have the necessary interface to GPC DMA.
---
 drivers/i2c/busses/i2c-tegra.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index e533460bccc3..d908e5e3f0af 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -446,6 +446,11 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 	u32 *dma_buf;
 	int err;
 
+	if (!of_property_present(i2c_dev->dev->of_node, "dmas")) {
+		dev_dbg(i2c_dev->dev, "DMA not available, falling back to PIO\n");
+		return 0;
+	}
+
 	if (IS_VI(i2c_dev))
 		return 0;
 
-- 
2.43.0