From: Kartik Rajput <kkartik@nvidia.com>
To: <akhilrajeev@nvidia.com>, <andi.shyti@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<ldewangan@nvidia.com>, <digetx@gmail.com>,
<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kkartik@nvidia.com>
Subject: [PATCH v8 2/4] i2c: tegra: Add HS mode support
Date: Wed, 17 Sep 2025 14:26:48 +0530 [thread overview]
Message-ID: <20250917085650.594279-3-kkartik@nvidia.com> (raw)
In-Reply-To: <20250917085650.594279-1-kkartik@nvidia.com>
From: Akhil R <akhilrajeev@nvidia.com>
Add support for HS (High Speed) mode transfers, which is supported by
Tegra194 onwards.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
v3 -> v5:
* Set has_hs_mode_support to false for unsupported SoCs.
v2 -> v3:
* Document tlow_hs_mode and thigh_hs_mode.
v1 -> v2:
* Document has_hs_mode_support.
* Add a check to set the frequency to fastmode+ if the device
does not support HS mode but the requested frequency is more
than fastmode+.
---
drivers/i2c/busses/i2c-tegra.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index d908e5e3f0af..6f816de8b3af 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -91,6 +91,7 @@
#define I2C_HEADER_IE_ENABLE BIT(17)
#define I2C_HEADER_REPEAT_START BIT(16)
#define I2C_HEADER_CONTINUE_XFER BIT(15)
+#define I2C_HEADER_HS_MODE BIT(22)
#define I2C_HEADER_SLAVE_ADDR_SHIFT 1
#define I2C_BUS_CLEAR_CNFG 0x084
@@ -198,6 +199,8 @@ enum msg_end_type {
* @thigh_std_mode: High period of the clock in standard mode.
* @tlow_fast_fastplus_mode: Low period of the clock in fast/fast-plus modes.
* @thigh_fast_fastplus_mode: High period of the clock in fast/fast-plus modes.
+ * @tlow_hs_mode: Low period of the clock in HS mode.
+ * @thigh_hs_mode: High period of the clock in HS mode.
* @setup_hold_time_std_mode: Setup and hold time for start and stop conditions
* in standard mode.
* @setup_hold_time_fast_fast_plus_mode: Setup and hold time for start and stop
@@ -206,6 +209,7 @@ enum msg_end_type {
* in HS mode.
* @has_interface_timing_reg: Has interface timing register to program the tuned
* timing settings.
+ * @has_hs_mode_support: Has support for high speed (HS) mode transfers.
*/
struct tegra_i2c_hw_feature {
bool has_continue_xfer_support;
@@ -226,10 +230,13 @@ struct tegra_i2c_hw_feature {
u32 thigh_std_mode;
u32 tlow_fast_fastplus_mode;
u32 thigh_fast_fastplus_mode;
+ u32 tlow_hs_mode;
+ u32 thigh_hs_mode;
u32 setup_hold_time_std_mode;
u32 setup_hold_time_fast_fast_plus_mode;
u32 setup_hold_time_hs_mode;
bool has_interface_timing_reg;
+ bool has_hs_mode_support;
};
/**
@@ -717,6 +724,20 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
+ /* Write HS mode registers. These will get used only for HS mode*/
+ if (i2c_dev->hw->has_hs_mode_support) {
+ tlow = i2c_dev->hw->tlow_hs_mode;
+ thigh = i2c_dev->hw->thigh_hs_mode;
+ tsu_thd = i2c_dev->hw->setup_hold_time_hs_mode;
+
+ val = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, thigh) |
+ FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, tlow);
+ i2c_writel(i2c_dev, val, I2C_HS_INTERFACE_TIMING_0);
+ i2c_writel(i2c_dev, tsu_thd, I2C_HS_INTERFACE_TIMING_1);
+ } else if (t->bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ) {
+ t->bus_freq_hz = I2C_MAX_FAST_MODE_PLUS_FREQ;
+ }
+
clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);
err = clk_set_rate(i2c_dev->div_clk,
@@ -1214,6 +1235,9 @@ static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
if (msg->flags & I2C_M_RD)
packet_header |= I2C_HEADER_READ;
+ if (i2c_dev->timings.bus_freq_hz > I2C_MAX_FAST_MODE_PLUS_FREQ)
+ packet_header |= I2C_HEADER_HS_MODE;
+
if (i2c_dev->dma_mode && !i2c_dev->msg_read)
*dma_buf++ = packet_header;
else
@@ -1502,6 +1526,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = false,
+ .has_hs_mode_support = false,
};
static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -1527,6 +1552,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = false,
+ .has_hs_mode_support = false,
};
static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -1552,6 +1578,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = false,
+ .has_hs_mode_support = false,
};
static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -1577,6 +1604,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0x0,
.setup_hold_time_hs_mode = 0x0,
.has_interface_timing_reg = true,
+ .has_hs_mode_support = false,
};
static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
@@ -1602,6 +1630,7 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0,
.setup_hold_time_hs_mode = 0,
.has_interface_timing_reg = true,
+ .has_hs_mode_support = false,
};
static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
@@ -1627,6 +1656,7 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
.setup_hold_time_fast_fast_plus_mode = 0,
.setup_hold_time_hs_mode = 0,
.has_interface_timing_reg = true,
+ .has_hs_mode_support = false,
};
static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
@@ -1648,10 +1678,13 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
.thigh_std_mode = 0x7,
.tlow_fast_fastplus_mode = 0x2,
.thigh_fast_fastplus_mode = 0x2,
+ .tlow_hs_mode = 0x8,
+ .thigh_hs_mode = 0x3,
.setup_hold_time_std_mode = 0x08080808,
.setup_hold_time_fast_fast_plus_mode = 0x02020202,
.setup_hold_time_hs_mode = 0x090909,
.has_interface_timing_reg = true,
+ .has_hs_mode_support = true,
};
static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
--
2.43.0
next prev parent reply other threads:[~2025-09-17 8:57 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-17 8:56 [PATCH v8 0/4] Add I2C support for Tegra264 Kartik Rajput
2025-09-17 8:56 ` [PATCH v8 1/4] i2c: tegra: Do not configure DMA if not supported Kartik Rajput
2025-09-17 14:08 ` Jon Hunter
2025-09-18 7:10 ` Kartik Rajput
2025-09-17 8:56 ` Kartik Rajput [this message]
2025-09-17 13:59 ` [PATCH v8 2/4] i2c: tegra: Add HS mode support Jon Hunter
2025-09-18 10:04 ` Akhil R
2025-09-18 10:21 ` Jon Hunter
2025-09-18 11:16 ` Akhil R
2025-09-18 12:55 ` Jon Hunter
2025-09-18 17:12 ` Akhil R
2025-09-18 17:33 ` Jon Hunter
2025-09-17 8:56 ` [PATCH v8 3/4] i2c: tegra: Add support for SW mutex register Kartik Rajput
2025-09-17 8:56 ` [PATCH v8 4/4] i2c: tegra: Add Tegra264 support Kartik Rajput
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917085650.594279-3-kkartik@nvidia.com \
--to=kkartik@nvidia.com \
--cc=akhilrajeev@nvidia.com \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=ldewangan@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox