From: Vladimir Zapolskiy <vz@kernel.org>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>,
Robert Foss <rfoss@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>
Cc: Andi Shyti <andi.shyti@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-i2c@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states
Date: Thu, 5 Nov 2026 01:05:29 +0200 [thread overview]
Message-ID: <20261104230529.3040285-4-vz@kernel.org> (raw)
In-Reply-To: <20261104230529.3040285-1-vz@kernel.org>
Add pinctrl states of six camera sensor MCLK output pins found on
Qualcomm SM8350 SoC.
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 84 ++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 41dff3736061..437ceaa28fbd 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3431,6 +3431,90 @@ tlmm: pinctrl@f100000 {
gpio-ranges = <&tlmm 0 0 204>;
wakeup-parent = <&pdc>;
+ cam_mclk0_default: cam-mclk0-default-state {
+ pins = "gpio100";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk0_sleep: cam-mclk0-sleep-state {
+ pins = "gpio100";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk1_default: cam-mclk1-default-state {
+ pins = "gpio101";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk1_sleep: cam-mclk1-sleep-state {
+ pins = "gpio101";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk2_default: cam-mclk2-default-state {
+ pins = "gpio102";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk2_sleep: cam-mclk2-sleep-state {
+ pins = "gpio102";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk3_default: cam-mclk3-default-state {
+ pins = "gpio103";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk3_sleep: cam-mclk3-sleep-state {
+ pins = "gpio103";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk4_default: cam-mclk4-default-state {
+ pins = "gpio104";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk4_sleep: cam-mclk4-sleep-state {
+ pins = "gpio104";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk5_default: cam-mclk5-default-state {
+ pins = "gpio105";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk5_sleep: cam-mclk5-sleep-state {
+ pins = "gpio105";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
cci0_0_default: cci0-0-default-state {
/* SDA, SCL */
pins = "gpio107", "gpio108";
--
2.51.0
next prev parent reply other threads:[~2026-11-04 23:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 23:05 [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins Vladimir Zapolskiy
2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy
2026-11-05 8:38 ` Loic Poulain
2026-11-04 23:05 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes Vladimir Zapolskiy
2026-11-05 8:37 ` Loic Poulain
2026-11-04 23:05 ` Vladimir Zapolskiy [this message]
2026-11-05 8:56 ` [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104230529.3040285-4-vz@kernel.org \
--to=vz@kernel.org \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox