* [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA @ 2017-11-15 19:54 Compostella, Jeremy 2017-11-27 18:38 ` Wolfram Sang 2018-01-15 17:59 ` Wolfram Sang 0 siblings, 2 replies; 6+ messages in thread From: Compostella, Jeremy @ 2017-11-15 19:54 UTC (permalink / raw) To: Wolfram Sang; +Cc: linux-i2c On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes data out of the msgbuf1 boundary. It is possible from a user application to run into that issue by call the I2C_SMBUS ioctl with data.block[0] greater than I2C_SMBUS_BLOCK_MAX + 1. Call Trace: [<ffffffff8139f695>] dump_stack+0x67/0x92 [<ffffffff811802a4>] panic+0xc5/0x1eb [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> --- drivers/i2c/i2c-core-smbus.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 10f00a8..f0be621 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -398,6 +398,12 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, case I2C_SMBUS_I2C_BLOCK_DATA: if (read_write == I2C_SMBUS_READ) { msg[1].len = data->block[0]; + if (msg[1].len > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, + "Invalid block read size %d\n", + data->block[0]); + return -EINVAL; + } } else { msg[0].len = data->block[0] + 1; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { -- 2.9.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA 2017-11-15 19:54 [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA Compostella, Jeremy @ 2017-11-27 18:38 ` Wolfram Sang 2017-11-27 19:14 ` Compostella, Jeremy 2018-01-15 17:59 ` Wolfram Sang 1 sibling, 1 reply; 6+ messages in thread From: Wolfram Sang @ 2017-11-27 18:38 UTC (permalink / raw) To: Compostella, Jeremy; +Cc: linux-i2c [-- Attachment #1: Type: text/plain, Size: 765 bytes --] On Wed, Nov 15, 2017 at 12:54:09PM -0700, Compostella, Jeremy wrote: > On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is > greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes > data out of the msgbuf1 boundary. > > It is possible from a user application to run into that issue by call > the I2C_SMBUS ioctl with data.block[0] greater than > I2C_SMBUS_BLOCK_MAX + 1. From Documentation/i2c/dev-interface: ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args) Not meant to be called directly; instead, use the access functions below. Maybe we should add this info to the include file as well? But I guess we still shouldn't OOPS on this misuse... Will think about it... Regards, Wolfram [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA 2017-11-27 18:38 ` Wolfram Sang @ 2017-11-27 19:14 ` Compostella, Jeremy 0 siblings, 0 replies; 6+ messages in thread From: Compostella, Jeremy @ 2017-11-27 19:14 UTC (permalink / raw) To: Wolfram Sang; +Cc: linux-i2c Wolfram Sang <wsa@the-dreams.de> writes: > On Wed, Nov 15, 2017 at 12:54:09PM -0700, Compostella, Jeremy wrote: > > On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is > > greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes > > data out of the msgbuf1 boundary. > > > > It is possible from a user application to run into that issue by call > > the I2C_SMBUS ioctl with data.block[0] greater than > > I2C_SMBUS_BLOCK_MAX + 1. > From Documentation/i2c/dev-interface: > ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args) > Not meant to be called directly; instead, use the access functions > below. > Maybe we should add this info to the include file as well? > But I guess we still shouldn't OOPS on this misuse... I read that part of the documentation too. But still, I really think this is an issue as there should not exist a so easy to corrupt the Kernel stack. Thanks, Jeremy ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA 2017-11-15 19:54 [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA Compostella, Jeremy 2017-11-27 18:38 ` Wolfram Sang @ 2018-01-15 17:59 ` Wolfram Sang 2018-01-16 19:42 ` Compostella, Jeremy 1 sibling, 1 reply; 6+ messages in thread From: Wolfram Sang @ 2018-01-15 17:59 UTC (permalink / raw) To: Compostella, Jeremy; +Cc: linux-i2c [-- Attachment #1: Type: text/plain, Size: 2914 bytes --] On Wed, Nov 15, 2017 at 12:54:09PM -0700, Compostella, Jeremy wrote: > On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is > greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes greater or equal? > data out of the msgbuf1 boundary. > > It is possible from a user application to run into that issue by call > the I2C_SMBUS ioctl with data.block[0] greater than > I2C_SMBUS_BLOCK_MAX + 1. ditto? > > Call Trace: > [<ffffffff8139f695>] dump_stack+0x67/0x92 > [<ffffffff811802a4>] panic+0xc5/0x1eb > [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 > [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 > [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 > [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 > [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 > [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 > [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 > [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 > [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a > > Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> > --- > drivers/i2c/i2c-core-smbus.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c > index 10f00a8..f0be621 100644 > --- a/drivers/i2c/i2c-core-smbus.c > +++ b/drivers/i2c/i2c-core-smbus.c > @@ -398,6 +398,12 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > case I2C_SMBUS_I2C_BLOCK_DATA: > if (read_write == I2C_SMBUS_READ) { > msg[1].len = data->block[0]; > + if (msg[1].len > I2C_SMBUS_BLOCK_MAX) { > + dev_err(&adapter->dev, > + "Invalid block read size %d\n", > + data->block[0]); > + return -EINVAL; > + } Basically good, yet to make the code easier to read I'd suggest something like this? Untested, wanted to hear your opinion first. drivers/i2c/i2c-core-smbus.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 4bb9927afd0106..5fc5ddd965434f 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -397,16 +397,16 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, the underlying bus driver */ break; case I2C_SMBUS_I2C_BLOCK_DATA: + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, "Invalid block size %d\n", + data->block[0]); + return -EINVAL; + } + if (read_write == I2C_SMBUS_READ) { msg[1].len = data->block[0]; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } for (i = 1; i <= data->block[0]; i++) msgbuf0[i] = data->block[i]; } [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA 2018-01-15 17:59 ` Wolfram Sang @ 2018-01-16 19:42 ` Compostella, Jeremy 2018-01-17 14:37 ` Wolfram Sang 0 siblings, 1 reply; 6+ messages in thread From: Compostella, Jeremy @ 2018-01-16 19:42 UTC (permalink / raw) To: Wolfram Sang; +Cc: linux-i2c [-- Attachment #1: Type: text/plain, Size: 2744 bytes --] Hi Wolfram, > On Wed, Nov 15, 2017 at 12:54:09PM -0700, Compostella, Jeremy wrote: > > On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is > > greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes > greater or equal? > > data out of the msgbuf1 boundary. > > > > It is possible from a user application to run into that issue by call > > the I2C_SMBUS ioctl with data.block[0] greater than > > I2C_SMBUS_BLOCK_MAX + 1. > ditto? Actually, this is a bit more complicated. Theoretically it should be "greater than I2C_SMBUS_BLOCK_MAX". The documentation (Documentation/i2c/dev-interface) says "The block buffers need not be longer than 32 bytes". However, in practice, The i2c_smbus_xfer_emulated() function defines: unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; It uses the first element to store the requested length. Therefore, in practice, we hit the issue with "greater than I2C_SMBUS_BLOCK_MAX + 1". > Basically good, yet to make the code easier to read I'd suggest > something like this? Untested, wanted to hear your opinion first. > drivers/i2c/i2c-core-smbus.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c > index 4bb9927afd0106..5fc5ddd965434f 100644 > --- a/drivers/i2c/i2c-core-smbus.c > +++ b/drivers/i2c/i2c-core-smbus.c > @@ -397,16 +397,16 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, > the underlying bus driver */ > break; > case I2C_SMBUS_I2C_BLOCK_DATA: > + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { > + dev_err(&adapter->dev, "Invalid block size %d\n", > + data->block[0]); > + return -EINVAL; > + } > + > if (read_write == I2C_SMBUS_READ) { > msg[1].len = data->block[0]; > } else { > msg[0].len = data->block[0] + 1; > - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { > - dev_err(&adapter->dev, > - "Invalid block write size %d\n", > - data->block[0]); > - return -EINVAL; > - } > for (i = 1; i <= data->block[0]; i++) > msgbuf0[i] = data->block[i]; > } This is a better option, I think I have made such a version at some points but did not want to touch the other case for some reasons that I cannot remember now :/ I have a added a little c ternary instruction to keep the same level of debug/error information. If you don't like it we can remove it. I have updated, tested and attached the new version to this email. I also improved the commit message by adding some information about what is expected by the documentation. I don't know what is the process to update the patch to the mailing list. Should I send a new email with the new patch instead ? Thanks, Jeremy [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA --] [-- Type: text/x-patch, Size: 2372 bytes --] >From 72c6683ac2e25304ec01e8fe2974abe744a129a0 Mon Sep 17 00:00:00 2001 From: Jeremy Compostella <jeremy.compostella@intel.com> Date: Wed, 15 Nov 2017 12:31:44 -0700 Subject: [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes data out of the msgbuf1 array boundary. It is possible from a user application to run into that issue by calling the I2C_SMBUS ioctl with data.block[0] greater than I2C_SMBUS_BLOCK_MAX + 1. This patch makes the code compliant with Documentation/i2c/dev-interface by raising an error when the requested size is larger than 32 bytes. Call Trace: [<ffffffff8139f695>] dump_stack+0x67/0x92 [<ffffffff811802a4>] panic+0xc5/0x1eb [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> --- drivers/i2c/i2c-core-smbus.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index 10f00a8..e54a9b8 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -396,16 +396,17 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, the underlying bus driver */ break; case I2C_SMBUS_I2C_BLOCK_DATA: + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, "Invalid block %s size %d\n", + read_write == I2C_SMBUS_READ ? "read" : "write", + data->block[0]); + return -EINVAL; + } + if (read_write == I2C_SMBUS_READ) { msg[1].len = data->block[0]; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } for (i = 1; i <= data->block[0]; i++) msgbuf0[i] = data->block[i]; } -- 2.9.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA 2018-01-16 19:42 ` Compostella, Jeremy @ 2018-01-17 14:37 ` Wolfram Sang 0 siblings, 0 replies; 6+ messages in thread From: Wolfram Sang @ 2018-01-17 14:37 UTC (permalink / raw) To: Compostella, Jeremy; +Cc: linux-i2c [-- Attachment #1: Type: text/plain, Size: 1304 bytes --] Hi Jeremy, > unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; > > It uses the first element to store the requested length. Therefore, > in practice, we hit the issue with "greater than I2C_SMBUS_BLOCK_MAX + > 1". Right, there is one extra byte reserved for PEC. So, the actual buffer overflow will happen at I2C_SMBUS_BLOCK_MAX + 1 since I2C_SMBUS_I2C_BLOCK_DATA does not have PEC. > I have a added a little c ternary instruction to keep the same level > of debug/error information. If you don't like it we can remove it. I like it. I just didn't include it in my proof of concept. > I have updated, tested and attached the new version to this email. I Very good, thank you! > also improved the commit message by adding some information about what > is expected by the documentation. I don't know what is the process to > update the patch to the mailing list. Should I send a new email with > the new patch instead ? Technically, yes. Usually, resend it as [PATCH v2] with a small changelog what changed since last version. Just dig the mail archive for examples. However, since I really want this in v4.15, I picked this patch from the attachment and have applied it to i2c/for-current and attached the stable-tag. Thank you very much! Wolfram [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-01-17 14:37 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2017-11-15 19:54 [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA Compostella, Jeremy 2017-11-27 18:38 ` Wolfram Sang 2017-11-27 19:14 ` Compostella, Jeremy 2018-01-15 17:59 ` Wolfram Sang 2018-01-16 19:42 ` Compostella, Jeremy 2018-01-17 14:37 ` Wolfram Sang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox