RE: [PATCH v16 2/3] i2c: aspeed: support AST2600 i2c new register mode driver

[Ryan Chen <ryan_chen@aspeedtech.com>]

> Subject: Re: [PATCH v16 2/3] i2c: aspeed: support AST2600 i2c new register
> mode driver
> 
> On Mo, 2025-02-24 at 13:59 +0800, Ryan Chen wrote:
> > Add i2c new register mode driver to support AST2600 i2c new register
> > mode. AST2600 i2c controller have legacy and new register mode. The
> > new register mode have global register support 4 base clock for scl
> > clock selection, and new clock divider mode. The new register mode
> > have separate register set to control i2c controller and target. This
> > patch is for i2c controller mode driver.
> >
> > Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
> > ---
> >  drivers/i2c/busses/Kconfig       |   11 +
> >  drivers/i2c/busses/Makefile      |    1 +
> >  drivers/i2c/busses/i2c-ast2600.c | 1036
> > ++++++++++++++++++++++++++++++
> >  3 files changed, 1048 insertions(+)
> >  create mode 100644 drivers/i2c/busses/i2c-ast2600.c
> >
> [...]
> > diff --git a/drivers/i2c/busses/i2c-ast2600.c
> > b/drivers/i2c/busses/i2c-ast2600.c
> > new file mode 100644
> > index 000000000000..bfac507693dd
> > --- /dev/null
> > +++ b/drivers/i2c/busses/i2c-ast2600.c
> > @@ -0,0 +1,1036 @@
> [...]
> > +static int ast2600_i2c_probe(struct platform_device *pdev) {
> > +	struct device *dev = &pdev->dev;
> > +	struct ast2600_i2c_bus *i2c_bus;
> > +	struct resource *res;
> > +	u32 global_ctrl;
> > +	int ret;
> > +
> > +	i2c_bus = devm_kzalloc(dev, sizeof(*i2c_bus), GFP_KERNEL);
> > +	if (!i2c_bus)
> > +		return -ENOMEM;
> > +
> > +	i2c_bus->reg_base = devm_platform_ioremap_resource(pdev, 0);
> > +	if (IS_ERR(i2c_bus->reg_base))
> > +		return PTR_ERR(i2c_bus->reg_base);
> > +
> > +	i2c_bus->rst = devm_reset_control_get_shared(dev, NULL);
> > +	if (IS_ERR(i2c_bus->rst))
> > +		return dev_err_probe(dev, PTR_ERR(i2c_bus->rst), "Missing reset
> > +ctrl\n");
> > +
> > +	reset_control_deassert(i2c_bus->rst);
> 
> No reset_control_assert() in the error paths below? You could get that and
> simplify this by using devm_reset_control_get_shared_deasserted().
> 
Sorry, devm_reset_control_get_shared_deasserted is new for me.
Do you mean modify by following 

i2c_bus->rst = devm_reset_control_get_shared_deasserted(dev, NULL);
if (IS_ERR(i2c_bus->rst))
    return dev_err_probe(dev, PTR_ERR(i2c_bus->rst), "Missing reset ctrl\n");

- reset_control_deassert(i2c_bus->rst);

> regards
> Philipp