Re: [PATCH v2] i2c: i801: Fix handling SMBHSTCNT_PEC_EN

[Wolfram Sang <wsa@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1056 bytes --]

On Tue, Jul 27, 2021 at 10:25:25PM +0200, Heiner Kallweit wrote:
> Bit SMBHSTCNT_PEC_EN is used only if software calculates the CRC and
> uses register SMBPEC. This is not supported by the driver, it supports
> hw-calculation of CRC only (using bit SMBAUXSTS_CRCE). The chip spec
> states the following, therefore never set bit SMBHSTCNT_PEC_EN.
> 
> Chapter SMBus CRC Generation and Checking
> If the AAC bit is set in the Auxiliary Control register, the PCH
> automatically calculates and drives CRC at the end of the transmitted
> packet for write cycles, and will check the CRC for read cycles. It will
> not transmit the contents of the PEC register for CRC. The PEC bit must
> not be set in the Host Control register. If this bit is set, unspecified
> behavior will result.
> 
> This patch is based solely on the specification and compile-tested only,
> because I have no PEC-capable devices.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> Tested-by: Jean Delvare <jdelvare@suse.de>

Applied to for-next, thanks!


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]