* [PULL REQUEST] i2c-andi-for-7.5-part1
@ 2026-11-15 12:19 Wolfram Sang
0 siblings, 0 replies; only message in thread
From: Wolfram Sang @ 2026-11-15 12:19 UTC (permalink / raw)
To: Andi Shyti; +Cc: linux-i2c
[-- Attachment #1: Type: text/plain, Size: 6317 bytes --]
The following changes since commit 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4:
Linux 7.4-rc1 (2026-11-01 13:26:31 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-andi-for-7.5-part1
for you to fetch changes up to e9b207e83347eaa99491a6ee6c2623019d506bbc:
i2c: dev: clean up registration (2026-11-12 12:01:34 +0100)
----------------------------------------------------------------
i2c-andi-for-7.5-part1
Hi Andi,
here are some patches I reviewed and think are good to go. Feel free to
pull this branch or pick the patches individually or whatever.
Happy hacking,
Wolfram
----------------------------------------------------------------
Aniket Randive (1):
i2c: qcom-geni: Clear stale TX/RX buffer pointers after GPI cleanup
Christian Marangi (2):
dt-bindings: i2c: mt7621: Document an7581 compatible
i2c: mt7621: limit SCL_STRETCH only to Mediatek SoC
Dmitry Guzman (9):
i2c: nomadik: optimize struct layout, change unsigned char into u8
i2c: nomadik: do not try to retransmit I2C message series on errors
i2c: nomadik: return proper fault codes
i2c: nomadik: change print level for fault messages to debug
i2c: nomadik: add quirks max_len=2047 and no_zero_len_read
i2c: nomadik: handle pm_runtime errors
i2c: nomadik: fix race condition with interrupt handler
i2c: nomadik: reduce FIFO flush timeout to avoid long interrupt handling
i2c: designware: return proper fault codes
Frank Li (1):
i2c: use dmaengine_desc_set_callback()
Guangshuo Li (1):
i2c: designware: amdisp: balance genpd on probe failure
Hongliang Wang (2):
dt-bindings: i2c: ls2x-i2c: Add clocks and clock-frequency properties
i2c: ls2x: Add clocks property parsing and adjust bus speed
Jean Delvare (2):
i2c: designware: Use msgs[0] to validate the slave address
i2c: designware: Turn models back to enumerated values
Johan Hovold (3):
i2c: dev: fix blocked adapter deregistration
i2c: dev: drop unnecessary sysfs device lookup
i2c: dev: clean up registration
Tommaso Merciai (1):
dt-bindings: i2c: renesas,riic: Drop clock-frequency from required
Umesh Kumar (1):
i2c: designware: Enable SAR in slave mode for Multiple SAR controllers
Wolfram Sang (1):
MAINTAINERS: add i2c-algo-bit to i2c-gpio driver
with much appreciated quality assurance from
----------------------------------------------------------------
Andy Shevchenko (1):
(Rev.) i2c: designware: Enable SAR in slave mode for Multiple SAR controllers
Bartosz Golaszewski (1):
(Rev.) i2c: dev: drop unnecessary sysfs device lookup
Bin Du (1):
(Test) i2c: designware: amdisp: balance genpd on probe failure
Binbin Zhou (2):
(Rev.) i2c: ls2x: Add clocks property parsing and adjust bus speed
(Rev.) dt-bindings: i2c: ls2x-i2c: Add clocks and clock-frequency properties
Geert Uytterhoeven (1):
(Rev.) dt-bindings: i2c: renesas,riic: Drop clock-frequency from required
Huacai Chen (2):
(Rev.) i2c: ls2x: Add clocks property parsing and adjust bus speed
(Rev.) dt-bindings: i2c: ls2x-i2c: Add clocks and clock-frequency properties
Jarkko Nikula (2):
(Test) i2c: designware: Turn models back to enumerated values
(Test) i2c: designware: Use msgs[0] to validate the slave address
Linus Walleij (7):
(Rev.) i2c: nomadik: reduce FIFO flush timeout to avoid long interrupt handling
(Rev.) i2c: nomadik: fix race condition with interrupt handler
(Rev.) i2c: nomadik: add quirks max_len=2047 and no_zero_len_read
(Rev.) i2c: nomadik: change print level for fault messages to debug
(Rev.) i2c: nomadik: return proper fault codes
(Rev.) i2c: nomadik: do not try to retransmit I2C message series on errors
(Rev.) i2c: nomadik: optimize struct layout, change unsigned char into u8
Mukesh Kumar Savaliya (1):
(Rev.) i2c: use dmaengine_desc_set_callback()
Praveen Talari (1):
(Rev.) i2c: qcom-geni: Clear stale TX/RX buffer pointers after GPI cleanup
Wolfram Sang (9):
(Rev.) i2c: dev: clean up registration
(Rev.) i2c: dev: drop unnecessary sysfs device lookup
(Rev.) i2c: mt7621: limit SCL_STRETCH only to Mediatek SoC
(Rev.) dt-bindings: i2c: mt7621: Document an7581 compatible
(Rev.) i2c: designware: Turn models back to enumerated values
(Rev.) i2c: designware: Use msgs[0] to validate the slave address
(Rev.) i2c: designware: Enable SAR in slave mode for Multiple SAR controllers
(Rev.) dt-bindings: i2c: renesas,riic: Drop clock-frequency from required
(Rev.) i2c: use dmaengine_desc_set_callback()
Xi Ruoyao (1):
(Test) i2c: ls2x: Add clocks property parsing and adjust bus speed
.../devicetree/bindings/i2c/loongson,ls2x-i2c.yaml | 3 +
.../bindings/i2c/mediatek,mt7621-i2c.yaml | 4 +-
.../devicetree/bindings/i2c/renesas,riic.yaml | 1 -
MAINTAINERS | 2 +
drivers/i2c/busses/i2c-at91-master.c | 6 +-
drivers/i2c/busses/i2c-designware-amdisp.c | 6 +-
drivers/i2c/busses/i2c-designware-common.c | 18 ++-
drivers/i2c/busses/i2c-designware-core.h | 7 +-
drivers/i2c/busses/i2c-designware-master.c | 8 +-
drivers/i2c/busses/i2c-imx-lpi2c.c | 3 +-
drivers/i2c/busses/i2c-imx.c | 3 +-
drivers/i2c/busses/i2c-ls2x.c | 44 +++++-
drivers/i2c/busses/i2c-mt7621.c | 25 +++-
drivers/i2c/busses/i2c-mxs.c | 3 +-
drivers/i2c/busses/i2c-nomadik.c | 108 ++++++++------
drivers/i2c/busses/i2c-qcom-geni.c | 10 +-
drivers/i2c/busses/i2c-qup.c | 6 +-
drivers/i2c/busses/i2c-rcar.c | 3 +-
drivers/i2c/busses/i2c-sh_mobile.c | 3 +-
drivers/i2c/busses/i2c-stm32.c | 3 +-
drivers/i2c/busses/i2c-tegra.c | 3 +-
drivers/i2c/i2c-dev.c | 166 +++++++++++++--------
include/linux/designware_i2c.h | 1 +
23 files changed, 283 insertions(+), 153 deletions(-)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-11-15 12:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-15 12:19 [PULL REQUEST] i2c-andi-for-7.5-part1 Wolfram Sang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox