Re: [PATCH v3 3/4] i2c: jz4780: Use devm_clk_get_enabled() helpers

[Rong Qianfeng <11065417@vivo.com>]

在 2024/8/23 23:33, Andy Shevchenko 写道:
> [Some people who received this message don't often get email from andriy.shevchenko@intel.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> On Fri, Aug 23, 2024 at 11:51:15AM +0800, Rong Qianfeng wrote:
>> The devm_clk_get_enabled() helpers:
>>      - call devm_clk_get()
>>      - call clk_prepare_enable() and register what is needed in order to
>>       call clk_disable_unprepare() when needed, as a managed resource.
>>
>> This simplifies the code and avoids the calls to clk_disable_unprepare().
>>
>> While at it, no more special handling needed here, remove the goto
>> label "err:".
> ...
>
>>        ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
>>                                   &clk_freq);
> (side note: this driver should use i2c_timings and respective I2C core
> APIs instead of this)
Sorry, I didn't fully understand what you meant, it's my problem. I guess
you are suggesting to use an API like i2c_parse_fw_timings() to get the
clock-frequency?


Best Regards,
Qianfeng
>
>>        if (ret) {
>>                dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
>> -             goto err;
>> +             return ret;
> While at it,
>
>                  return dev_err_probe(...);
>
>>        }
>>        i2c->speed = clk_freq / 1000;
> (side note: this should be HZ_PER_KHZ from units.h)
>
>>        if (i2c->speed == 0) {
>>                ret = -EINVAL;
>>                dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
>> -             goto err;
>> +             return ret;
>                  return dev_err_probe(...);
>
>>        }
> ...
>
>>        ret = platform_get_irq(pdev, 0);
>>        if (ret < 0)
>> -             goto err;
>> +             return ret;
>>        i2c->irq = ret;
> I would add a blank line here.
>
>>        ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
>>                               dev_name(&pdev->dev), i2c);
>>        if (ret)
>> -             goto err;
>> +             return ret;
>
> --
> With Best Regards,
> Andy Shevchenko
>
>