Re: [PATCH v9 1/4] i2c: tegra: Do not configure DMA if not supported

[Jon Hunter <jonathanh@nvidia.com>]

On 01/10/2025 07:47, Kartik Rajput wrote:
> On Tegra264, not all I2C controllers have the necessary interface to
> GPC DMA, this causes failures when function tegra_i2c_init_dma()
> is called.
> 
> Ensure that "dmas" device-tree property is present before initializing
> DMA in function tegra_i2c_init_dma().
> 
> Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
> ---
> v4 -> v9: Moved the condition down to have all dma checks together.
> v2 -> v4:
>          * Add debug print if DMA is not supported by the I2C controller.
> v1 -> v2:
>          * Update commit message to clarify that some I2C controllers may
>            not have the necessary interface to GPC DMA.
> ---
>   drivers/i2c/busses/i2c-tegra.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index e533460bccc3..aa7c0d8c0941 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -449,6 +449,11 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
>   	if (IS_VI(i2c_dev))
>   		return 0;
>   
> +	if (!of_property_present(i2c_dev->dev->of_node, "dmas")) {
> +		dev_dbg(i2c_dev->dev, "DMA not available, falling back to PIO\n");
> +		return 0;
> +	}
> +
>   	if (i2c_dev->hw->has_apb_dma) {
>   		if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
>   			dev_dbg(i2c_dev->dev, "APB DMA support not enabled\n");

What about ACPI based devices?

Jon

-- 
nvpublic