From: Frank Li <Frank.Li@nxp.com>
To: miquel.raynal@bootlin.com
Cc: Frank.Li@nxp.com, alexandre.belloni@bootlin.com,
conor.culhane@silvaco.com, imx@lists.linux.dev, joe@perches.com,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 Resent 2/6] i3c: master: svc: fix wrong data return when IBI happen during start frame
Date: Wed, 18 Oct 2023 11:59:22 -0400 [thread overview]
Message-ID: <20231018155926.3305476-3-Frank.Li@nxp.com> (raw)
In-Reply-To: <20231018155926.3305476-1-Frank.Li@nxp.com>
┌─────┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┌─────
SCL: ┘ └─────┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┘
───┐ ┌─────┐ ┌─────┐ ┌───────────┐
SDA: └───────────────────────┘ └─────┘ └─────┘ └─────
xxx╱ ╲╱ ╲╱ ╲╱ ╲╱ ╲
: xxx╲IBI ╱╲ Addr(0x0a) ╱╲ RW ╱╲NACK╱╲ S ╱
If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately
scheduled, When svc_i3c_master_priv_xfers() initiates the I3C transfer and
attempts to send address 0x7e, the target interprets it as an
IBI handler and returns the target address 0x0a.
However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
with other transfers, resulting in incorrect data being returned.
Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs,
return a failure to the driver.
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: stable@vger.kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Notes:
Change from v1 to v2
- update commit message
- fix typo yeild and falure
drivers/i3c/master/svc-i3c-master.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 8cd708c965085..abebef666b2bb 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1010,6 +1010,9 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
u32 reg;
int ret;
+ /* clean SVC_I3C_MINT_IBIWON w1c bits */
+ writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
+
writel(SVC_I3C_MCTRL_REQUEST_START_ADDR |
xfer_type |
SVC_I3C_MCTRL_IBIRESP_NACK |
@@ -1028,6 +1031,23 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
goto emit_stop;
}
+ /*
+ * According to I3C spec ver 1.1.1, 5.1.2.2.3 Consequence of Controller Starting a Frame
+ * with I3C Target Address.
+ *
+ * The I3C Controller normally should start a Frame, the Address may be arbitrated, and so
+ * the Controller shall monitor to see whether an In-Band Interrupt request, a Controller
+ * Role Request (i.e., Secondary Controller requests to become the Active Controller), or
+ * a Hot-Join Request has been made.
+ *
+ * If missed IBIWON check, the wrong data will be return. When IBIWON happen, return failure
+ * and yield the above events handler.
+ */
+ if (SVC_I3C_MSTATUS_IBIWON(reg)) {
+ ret = -ENXIO;
+ goto emit_stop;
+ }
+
if (rnw)
ret = svc_i3c_master_read(master, in, xfer_len);
else
--
2.34.1
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2023-10-18 15:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 15:59 [PATCH v2 Resent 0/6] i3c: master: svc: collection of bugs fixes Frank Li
2023-10-18 15:59 ` [PATCH v2 Resent 1/6] i3c: master: svc: fix race condition in ibi work thread Frank Li
2023-10-18 15:59 ` Frank Li [this message]
2023-10-18 15:59 ` [PATCH v2 Resent 3/6] i3c: master: svc: fix ibi may not return mandatory data byte Frank Li
2023-10-19 6:29 ` Miquel Raynal
2023-10-18 15:59 ` [PATCH v2 Resent 4/6] i3c: master: svc: fix check wrong status register in irq handler Frank Li
2023-10-18 15:59 ` [PATCH v2 Resent 5/6] i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen Frank Li
2023-10-19 6:31 ` Miquel Raynal
2023-10-18 15:59 ` [PATCH v2 Resent 6/6] i3c: master: svc: fix random hot join failure since timeout error Frank Li
2023-10-19 6:44 ` Miquel Raynal
2023-10-19 15:39 ` Frank Li
2023-10-20 14:06 ` Miquel Raynal
2023-10-20 14:18 ` Frank Li
2023-10-20 14:35 ` Miquel Raynal
2023-10-20 14:47 ` Frank Li
2023-10-20 15:17 ` Frank Li
2023-10-20 15:25 ` Miquel Raynal
2023-10-20 15:20 ` Miquel Raynal
2023-10-20 15:47 ` [PATCH v2 Resent 6/6] i3c: master: svc: fix random hot join failure since timeout errory Frank Li
2023-10-20 17:03 ` Miquel Raynal
2023-10-20 19:58 ` Frank Li
2023-10-23 7:48 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018155926.3305476-3-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor.culhane@silvaco.com \
--cc=imx@lists.linux.dev \
--cc=joe@perches.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox