public inbox for linux-i3c@lists.infradead.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	 Boris Brezillon <boris.brezillon@collabora.com>,
	 Parshuram Thombare <pthombar@cadence.com>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Boris Brezillon <bbrezillon@kernel.org>,
	Arnd Bergmann <arnd@arndb.de>,
	 Miquel Raynal <miquel.raynal@bootlin.com>,
	 Conor Culhane <conor.culhane@silvaco.com>
Cc: linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
	 imx@lists.linux.dev, Frank Li <Frank.Li@nxp.com>,
	stable@kernel.org
Subject: [PATCH v3 11/11] i3c: master: svc: fix possible assignment of the same address to two devices
Date: Mon, 19 Aug 2024 12:02:05 -0400	[thread overview]
Message-ID: <20240819-i3c_fix-v3-11-7d69f7b0a05e@nxp.com> (raw)
In-Reply-To: <20240819-i3c_fix-v3-0-7d69f7b0a05e@nxp.com>

svc_i3c_master_do_daa() {
    ...
    for (i = 0; i < dev_nb; i++) {
        ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
        if (ret)
            goto rpm_out;
    }
}

If two devices (A and B) are detected in DAA and address 0xa is assigned to
device A and 0xb to device B, a failure in i3c_master_add_i3c_dev_locked()
for device A (addr: 0xa) could prevent device B (addr: 0xb) from being
registered on the bus. The I3C stack might still consider 0xb a free
address. If a subsequent Hotjoin occurs, 0xb might be assigned to Device A,
causing both devices A and B to use the same address 0xb, violating the I3C
specification.

The return value for i3c_master_add_i3c_dev_locked() should not be checked
because subsequent steps will scan the entire I3C bus, independent of
whether i3c_master_add_i3c_dev_locked() returns success.

If device A registration fails, there is still a chance to register device
B. i3c_master_add_i3c_dev_locked() can reset DAA if a failure occurs while
retrieving device information.

Cc: stable@kernel.org
Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/i3c/master/svc-i3c-master.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 2010495906eb3..003565fddc261 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -1042,11 +1042,8 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
 		goto rpm_out;
 
 	/* Register all devices who participated to the core */
-	for (i = 0; i < dev_nb; i++) {
-		ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
-		if (ret)
-			goto rpm_out;
-	}
+	for (i = 0; i < dev_nb; i++)
+		i3c_master_add_i3c_dev_locked(m, addrs[i]);
 
 	/* Configure IBI auto-rules */
 	ret = svc_i3c_update_ibirules(master);

-- 
2.34.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  parent reply	other threads:[~2024-08-19 16:03 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-19 16:01 [PATCH v3 00/11] i3c: master: some fix and improvemnt for hotjoin Frank Li
2024-08-19 16:01 ` [PATCH v3 01/11] i3c: master: Remove i3c_dev_disable_ibi_locked(olddev) on device hotjoin Frank Li
2024-08-20  1:34   ` Stanley Chu
2024-08-20 14:45     ` Frank Li
2024-08-23 15:53       ` Miquel Raynal
2024-08-19 16:01 ` [PATCH v3 02/11] i3c: master: Replace hard code 2 with macro I3C_ADDR_SLOT_BITS Frank Li
2024-08-23 15:55   ` Miquel Raynal
2024-08-23 17:57     ` Frank Li
2024-08-26  8:05       ` Miquel Raynal
2024-08-19 16:01 ` [PATCH v3 03/11] i3c: master: Extend address status bit to 4 and add I3C_ADDR_SLOT_EXT_INIT Frank Li
2024-08-23 16:04   ` Miquel Raynal
2024-08-23 17:55     ` Frank Li
2024-08-26  8:04       ` Miquel Raynal
2024-08-26 15:56         ` Frank Li
2024-08-26 16:49           ` Miquel Raynal
2024-08-26 18:55             ` Frank Li
2024-09-02 14:12               ` Miquel Raynal
2024-09-02 18:20                 ` Frank Li
2024-09-03 13:00                   ` Miquel Raynal
2024-09-03 15:06                     ` Frank Li
2024-09-09 20:01                       ` Frank Li
2024-09-16 15:14                         ` Frank Li
2024-08-19 16:01 ` [PATCH v3 04/11] i3c: master: Fix dynamic address leak when 'assigned-address' is present Frank Li
2024-08-19 16:01 ` [PATCH v3 05/11] i3c: master: Fix miss free init_dyn_addr at i3c_master_put_i3c_addrs() Frank Li
2024-08-23 16:07   ` Miquel Raynal
2024-08-19 16:02 ` [PATCH v3 06/11] i3c: master: svc: use repeat start when IBI WIN happens Frank Li
2024-08-23 16:09   ` Miquel Raynal
2024-08-19 16:02 ` [PATCH v3 07/11] i3c: master: svc: manually emit NACK/ACK for hotjoin Frank Li
2024-08-23 16:10   ` Miquel Raynal
2024-08-19 16:02 ` [PATCH v3 08/11] i3c: master: svc: need check IBIWON for dynamtica address assign Frank Li
2024-08-23 16:12   ` Miquel Raynal
2024-08-19 16:02 ` [PATCH v3 09/11] i3c: master: svc: use spinlock_saveirq at svc_i3c_master_ibi_work() Frank Li
2024-08-23 16:19   ` Miquel Raynal
2024-08-23 16:53     ` Frank Li
2024-08-19 16:02 ` [PATCH v3 10/11] i3c: master: svc: wait for Manual ACK/NACK Done before next step Frank Li
2024-08-23 16:22   ` Miquel Raynal
2024-08-23 16:45     ` Frank Li
2024-08-19 16:02 ` Frank Li [this message]
2024-08-23 16:24   ` [PATCH v3 11/11] i3c: master: svc: fix possible assignment of the same address to two devices Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240819-i3c_fix-v3-11-7d69f7b0a05e@nxp.com \
    --to=frank.li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=bbrezillon@kernel.org \
    --cc=boris.brezillon@collabora.com \
    --cc=conor.culhane@silvaco.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=pthombar@cadence.com \
    --cc=stable@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox