[PATCH] i3c: master: replace sprintf() with sysfs_emit() and sysfs_emit_at()

[PATCH] i3c: master: replace sprintf() with sysfs_emit() and sysfs_emit_at()

[Maxwell Doose]

This patch replaces sprintf() function calls with sysfs_emit() and
sysfs_emit_at() function calls where appropriate. While the current code
is functional, this patch will help harden the driver and help modernize
it. While at it, this patch also adds missing newlines at the end of
some sysfs_emit() (formerly sprintf()) calls.

Signed-off-by: Maxwell Doose <m32285159@gmail.com>
---
 drivers/i3c/master.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 9e6be49bebb2..c0d19eae06b9 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -174,7 +174,7 @@ static ssize_t bcr_show(struct device *dev,
 
 	i3c_bus_normaluse_lock(bus);
 	desc = dev_to_i3cdesc(dev);
-	ret = sprintf(buf, "0x%02x\n", desc->info.bcr);
+	ret = sysfs_emit(buf, "0x%02x\n", desc->info.bcr);
 	i3c_bus_normaluse_unlock(bus);
 
 	return ret;
@@ -191,7 +191,7 @@ static ssize_t dcr_show(struct device *dev,
 
 	i3c_bus_normaluse_lock(bus);
 	desc = dev_to_i3cdesc(dev);
-	ret = sprintf(buf, "0x%02x\n", desc->info.dcr);
+	ret = sysfs_emit(buf, "0x%02x\n", desc->info.dcr);
 	i3c_bus_normaluse_unlock(bus);
 
 	return ret;
@@ -208,7 +208,7 @@ static ssize_t pid_show(struct device *dev,
 
 	i3c_bus_normaluse_lock(bus);
 	desc = dev_to_i3cdesc(dev);
-	ret = sprintf(buf, "%llx\n", desc->info.pid);
+	ret = sysfs_emit(buf, "%llx\n", desc->info.pid);
 	i3c_bus_normaluse_unlock(bus);
 
 	return ret;
@@ -225,7 +225,7 @@ static ssize_t dynamic_address_show(struct device *dev,
 
 	i3c_bus_normaluse_lock(bus);
 	desc = dev_to_i3cdesc(dev);
-	ret = sprintf(buf, "%02x\n", desc->info.dyn_addr);
+	ret = sysfs_emit(buf, "%02x\n", desc->info.dyn_addr);
 	i3c_bus_normaluse_unlock(bus);
 
 	return ret;
@@ -256,7 +256,7 @@ static ssize_t hdrcap_show(struct device *dev,
 		if (!hdrcap_strings[mode])
 			continue;
 
-		ret = sprintf(buf + offset, offset ? " %s" : "%s",
+		ret = sysfs_emit_at(buf, offset, offset ? " %s" : "%s",
 			      hdrcap_strings[mode]);
 		if (ret < 0)
 			goto out;
@@ -264,7 +264,7 @@ static ssize_t hdrcap_show(struct device *dev,
 		offset += ret;
 	}
 
-	ret = sprintf(buf + offset, "\n");
+	ret = sysfs_emit_at(buf, offset, "\n");
 	if (ret < 0)
 		goto out;
 
@@ -290,10 +290,10 @@ static ssize_t modalias_show(struct device *dev,
 	ext = I3C_PID_EXTRA_INFO(devinfo.pid);
 
 	if (I3C_PID_RND_LOWER_32BITS(devinfo.pid))
-		return sprintf(buf, "i3c:dcr%02Xmanuf%04X", devinfo.dcr,
+		return sysfs_emit(buf, "i3c:dcr%02Xmanuf%04X\n", devinfo.dcr,
 			       manuf);
 
-	return sprintf(buf, "i3c:dcr%02Xmanuf%04Xpart%04Xext%04X",
+	return sysfs_emit(buf, "i3c:dcr%02Xmanuf%04Xpart%04Xext%04X\n",
 		       devinfo.dcr, manuf, part, ext);
 }
 static DEVICE_ATTR_RO(modalias);
@@ -578,9 +578,9 @@ static ssize_t mode_show(struct device *dev,
 	if (i3cbus->mode < 0 ||
 	    i3cbus->mode >= ARRAY_SIZE(i3c_bus_mode_strings) ||
 	    !i3c_bus_mode_strings[i3cbus->mode])
-		ret = sprintf(buf, "unknown\n");
+		ret = sysfs_emit(buf, "unknown\n");
 	else
-		ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]);
+		ret = sysfs_emit(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]);
 	i3c_bus_normaluse_unlock(i3cbus);
 
 	return ret;
@@ -595,7 +595,7 @@ static ssize_t current_master_show(struct device *dev,
 	ssize_t ret;
 
 	i3c_bus_normaluse_lock(i3cbus);
-	ret = sprintf(buf, "%d-%llx\n", i3cbus->id,
+	ret = sysfs_emit(buf, "%d-%llx\n", i3cbus->id,
 		      i3cbus->cur_master->info.pid);
 	i3c_bus_normaluse_unlock(i3cbus);
 
@@ -611,7 +611,7 @@ static ssize_t i3c_scl_frequency_show(struct device *dev,
 	ssize_t ret;
 
 	i3c_bus_normaluse_lock(i3cbus);
-	ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c);
+	ret = sysfs_emit(buf, "%ld\n", i3cbus->scl_rate.i3c);
 	i3c_bus_normaluse_unlock(i3cbus);
 
 	return ret;
@@ -626,7 +626,7 @@ static ssize_t i2c_scl_frequency_show(struct device *dev,
 	ssize_t ret;
 
 	i3c_bus_normaluse_lock(i3cbus);
-	ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c);
+	ret = sysfs_emit(buf, "%ld\n", i3cbus->scl_rate.i2c);
 	i3c_bus_normaluse_unlock(i3cbus);
 
 	return ret;
-- 
2.53.0


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH] i3c: master: replace sprintf() with sysfs_emit() and sysfs_emit_at()

[Frank Li]

On Mon, Apr 20, 2026 at 08:10:49PM -0500, Maxwell Doose wrote:
> This patch replaces sprintf() function calls with sysfs_emit() and

Documentation/process/submitting-patches.rst don't prefer use words "this
patch",  Use imperative mood

Replaces sprintf() with sysfs_emit[_at](). Add missing newlines at the end
of some sysfs_emit() (formerly sprintf()) calls.

Frank


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH] i3c: master: replace sprintf() with sysfs_emit() and sysfs_emit_at()

[Maxwell Doose]

On Mon, Apr 20, 2026 at 9:48 PM Frank Li <Frank.li@nxp.com> wrote:
>
> Documentation/process/submitting-patches.rst don't prefer use words "this
> patch",  Use imperative mood
>
> Replaces sprintf() with sysfs_emit[_at](). Add missing newlines at the end
> of some sysfs_emit() (formerly sprintf()) calls.
>

Hi Frank,

Thanks for pointing me in the right direction, I'll make sure to add
these changes for a v2 when I've got the time.

best regards,
maxwell

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c