[PATCH v5 0/5] Add microchip sama7d65 SoC I3C support

[PATCH v5 0/5] Add microchip sama7d65 SoC I3C support

[Manikandan Muralidharan]

Add support for microchip sama7d65 SoC I3C master only IP which is
based on mipi-i3c-hci from synopsys implementing version 1.0
specification. The platform specific changes are integrated in the
mipi-i3c-hci driver using existing quirks

I3C in master mode supports up to 12.5MHz, SDR mode data transfer in
mixed bus mode (I2C and I3C target devices on same i3c bus).

Durai Manickam KR (3):
  clk: at91: sama7d65: add peripheral clock for I3C
  ARM: dts: microchip: add I3C controller
  ARM: configs: at91: sama7: add sama7d65 i3c-hci

Manikandan Muralidharan (2):
  dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
  i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the
    required quirk

 .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 27 ++++++++++++++++---
 arch/arm/boot/dts/microchip/sama7d65.dtsi     |  8 ++++++
 arch/arm/configs/sama7_defconfig              |  2 ++
 drivers/clk/at91/sama7d65.c                   |  1 +
 drivers/i3c/master/mipi-i3c-hci/core.c        | 10 +++++++
 5 files changed, 44 insertions(+), 4 deletions(-)

-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v5 1/5] dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible

[Manikandan Muralidharan]

Add the microchip,sama7d65-i3c-hci compatible string to the MIPI I3C
HCI binding. The Microchip SAMA7D65 I3C controller is based on the
MIPI HCI specification but requires two clocks, so add a conditional
constraint when this compatible is present.

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
Changes in v5:
- drop min/maxItems around clock
- use else clause
- cosmetic fixes

Changes in v4:
- Define and describe the clock in the top-level properties
---
 .../devicetree/bindings/i3c/mipi-i3c-hci.yaml | 27 ++++++++++++++++---
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
index 39bb1a1784c9..d488fb420945 100644
--- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -9,9 +9,6 @@ title: MIPI I3C HCI
 maintainers:
   - Nicolas Pitre <npitre@baylibre.com>
 
-allOf:
-  - $ref: /schemas/i3c/i3c.yaml#
-
 description: |
   MIPI I3C Host Controller Interface
 
@@ -28,9 +25,17 @@ description: |
 
 properties:
   compatible:
-    const: mipi-i3c-hci
+    enum:
+      - mipi-i3c-hci
+      - microchip,sama7d65-i3c-hci
   reg:
     maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral bus clock
+      - description: System Generic clock
+
   interrupts:
     maxItems: 1
 
@@ -39,6 +44,20 @@ required:
   - reg
   - interrupts
 
+allOf:
+  - $ref: /schemas/i3c/i3c.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,sama7d65-i3c-hci
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
 unevaluatedProperties: false
 
 examples:
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v5 2/5] clk: at91: sama7d65: add peripheral clock for I3C

[Manikandan Muralidharan]

From: Durai Manickam KR <durai.manickamkr@microchip.com>

Add peripheral clock description for I3C.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
changes in v3:
- Fixed indentation issues
---
 drivers/clk/at91/sama7d65.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/at91/sama7d65.c b/drivers/clk/at91/sama7d65.c
index 7dee2b160ffb..ba8ff413fa2c 100644
--- a/drivers/clk/at91/sama7d65.c
+++ b/drivers/clk/at91/sama7d65.c
@@ -677,6 +677,7 @@ static struct {
 	{ .n = "uhphs_clk",	.p = PCK_PARENT_HW_MCK5, .id = 101, },
 	{ .n = "dsi_clk",	.p = PCK_PARENT_HW_MCK3, .id = 103, },
 	{ .n = "lvdsc_clk",	.p = PCK_PARENT_HW_MCK3, .id = 104, },
+	{ .n = "i3cc_clk",	.p = PCK_PARENT_HW_MCK8, .id = 105, },
 };
 
 /*
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v5 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk

[Manikandan Muralidharan]

Add support for microchip sama7d65 SoC I3C HCI master only IP
with additional clock support to enable bulk clock acquisition

Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
Changes in v5:
- Remove HCI_QUIRK_CLK_SUPPORT quirk and call
devm_clk_bulk_get_all_enabled unconditionally

Changes in v4:
- Remove the clock index variable MCHP_I3C_CLK_IDX

Changes in v3:
- Make use of existing HCI_QUIRK_* code base
- Introduce HCI_QUIRK_CLK_SUPPORT to handle/enable the required Peripheral
and system generic clk in bulk

Changes in v2:
- Platform specific changes are integrated in the existing mipi-i3c-hci
driver by introducing separate MCHP_HCI_QUIRK_* quirks and vendor
specific quirk files
---
 drivers/i3c/master/mipi-i3c-hci/core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index b781dbed2165..20d32a9eb62c 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/bitfield.h>
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/i3c/master.h>
@@ -970,6 +971,7 @@ static int i3c_hci_probe(struct platform_device *pdev)
 {
 	const struct mipi_i3c_hci_platform_data *pdata = pdev->dev.platform_data;
 	struct i3c_hci *hci;
+	struct clk_bulk_data *clks;
 	int irq, ret;
 
 	hci = devm_kzalloc(&pdev->dev, sizeof(*hci), GFP_KERNEL);
@@ -1001,6 +1003,11 @@ static int i3c_hci_probe(struct platform_device *pdev)
 	if (!hci->quirks && platform_get_device_id(pdev))
 		hci->quirks = platform_get_device_id(pdev)->driver_data;
 
+	ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &clks);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to get clocks\n");
+
 	ret = i3c_hci_init(hci);
 	if (ret)
 		return ret;
@@ -1031,6 +1038,9 @@ static void i3c_hci_remove(struct platform_device *pdev)
 
 static const __maybe_unused struct of_device_id i3c_hci_of_match[] = {
 	{ .compatible = "mipi-i3c-hci", },
+	{ .compatible = "microchip,sama7d65-i3c-hci",
+	  .data = (void *)(HCI_QUIRK_PIO_MODE | HCI_QUIRK_OD_PP_TIMING |
+			   HCI_QUIRK_RESP_BUF_THLD) },
 	{},
 };
 MODULE_DEVICE_TABLE(of, i3c_hci_of_match);
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v5 4/5] ARM: dts: microchip: add I3C controller

[Manikandan Muralidharan]

From: Durai Manickam KR <durai.manickamkr@microchip.com>

Add I3C controller for sama7d65 SoC.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
Changes in v3:
- Remove clock-names property as driver enables the clk in bulk
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index 67253bbc08df..ec200848c153 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -1055,5 +1055,13 @@ gic: interrupt-controller@e8c11000 {
 			#address-cells = <0>;
 			interrupt-controller;
 		};
+
+		i3c: i3c@e9000000 {
+			compatible = "microchip,sama7d65-i3c-hci";
+			reg = <0xe9000000 0x300>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 105>, <&pmc PMC_TYPE_GCK 105>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

[PATCH v5 5/5] ARM: configs: at91: sama7: add sama7d65 i3c-hci

[Manikandan Muralidharan]

From: Durai Manickam KR <durai.manickamkr@microchip.com>

Enable the configs needed for I3C framework and microchip
sama7d65 i3c-hci driver.

Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
---
 arch/arm/configs/sama7_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index e52f671ccec4..6470c7d3fe8a 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -117,6 +117,8 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_AT91=y
+CONFIG_I3C=y
+CONFIG_MIPI_I3C_HCI=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_ATMEL_QUADSPI=y
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

Re: [PATCH v5 3/5] i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk

[Adrian Hunter]

On 05/05/2026 10:13, Manikandan Muralidharan wrote:
> Add support for microchip sama7d65 SoC I3C HCI master only IP
> with additional clock support to enable bulk clock acquisition
> 
> Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>

One minor cosmetic comment below, nevertheless:

Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
> Changes in v5:
> - Remove HCI_QUIRK_CLK_SUPPORT quirk and call
> devm_clk_bulk_get_all_enabled unconditionally
> 
> Changes in v4:
> - Remove the clock index variable MCHP_I3C_CLK_IDX
> 
> Changes in v3:
> - Make use of existing HCI_QUIRK_* code base
> - Introduce HCI_QUIRK_CLK_SUPPORT to handle/enable the required Peripheral
> and system generic clk in bulk
> 
> Changes in v2:
> - Platform specific changes are integrated in the existing mipi-i3c-hci
> driver by introducing separate MCHP_HCI_QUIRK_* quirks and vendor
> specific quirk files
> ---
>  drivers/i3c/master/mipi-i3c-hci/core.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index b781dbed2165..20d32a9eb62c 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -8,6 +8,7 @@
>   */
>  
>  #include <linux/bitfield.h>
> +#include <linux/clk.h>
>  #include <linux/device.h>
>  #include <linux/errno.h>
>  #include <linux/i3c/master.h>
> @@ -970,6 +971,7 @@ static int i3c_hci_probe(struct platform_device *pdev)
>  {
>  	const struct mipi_i3c_hci_platform_data *pdata = pdev->dev.platform_data;
>  	struct i3c_hci *hci;
> +	struct clk_bulk_data *clks;

If you roll a new version of this patch, prefer to arrange local variable
definitions in descending order of line length e.g.

  	const struct mipi_i3c_hci_platform_data *pdata = pdev->dev.platform_data;
	struct clk_bulk_data *clks;
  	struct i3c_hci *hci;

>  	int irq, ret;
>  
>  	hci = devm_kzalloc(&pdev->dev, sizeof(*hci), GFP_KERNEL);
> @@ -1001,6 +1003,11 @@ static int i3c_hci_probe(struct platform_device *pdev)
>  	if (!hci->quirks && platform_get_device_id(pdev))
>  		hci->quirks = platform_get_device_id(pdev)->driver_data;
>  
> +	ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &clks);
> +	if (ret < 0)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "Failed to get clocks\n");
> +
>  	ret = i3c_hci_init(hci);
>  	if (ret)
>  		return ret;
> @@ -1031,6 +1038,9 @@ static void i3c_hci_remove(struct platform_device *pdev)
>  
>  static const __maybe_unused struct of_device_id i3c_hci_of_match[] = {
>  	{ .compatible = "mipi-i3c-hci", },
> +	{ .compatible = "microchip,sama7d65-i3c-hci",
> +	  .data = (void *)(HCI_QUIRK_PIO_MODE | HCI_QUIRK_OD_PP_TIMING |
> +			   HCI_QUIRK_RESP_BUF_THLD) },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, i3c_hci_of_match);


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c