From: Frank Li <Frank.li@nxp.com>
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexandre.belloni@bootlin.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error
Date: Sun, 19 Apr 2026 22:20:44 -0400 [thread overview]
Message-ID: <aeWNfN0x-Ptsj1-g@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <3db31a9c-443c-4d2e-a6fa-8cf16cb80bcf@intel.com>
On Fri, Apr 17, 2026 at 08:07:11PM +0300, Adrian Hunter wrote:
> On 17/04/2026 09:56, Frank Li wrote:
> > On Thu, Apr 16, 2026 at 08:56:51PM +0300, Adrian Hunter wrote:
> >> Block the DMA enqueue path while a Ring abort is in progress or after an
> >> error condition has been detected.
> >>
> >> Previously, new transfers could be enqueued while the DMA Ring was being
> >> aborted or while error handling was underway. This allowed enqueue and
> >> error-recovery paths to run concurrently, potentially interfering with
> >> each other and corrupting Ring state.
> >
> > why not hold lock at abort and error handler? does it take quite long time
> > to do that?
>
> hci_dma_dequeue_xfer() handles errors. It is called from
> i3c_hci_process_xfer():
> on timeout:
> calls ->dequeue_xfer() == hci_dma_dequeue_xfer()
> on error:
> calls ->handle_error() == hci_dma_handle_error()
> calls hci_dma_dequeue_xfer()
>
> It takes the spin lock, but has to release it to wait for the
> abort. There is no set time for how long the abort can take,
> but the timeout is 1 second, so it is not suitable to wait
> for.
Feel like overall equeue/dequeue and timeout's lock is too complex, it is
quite easy to involve bugs.
Is it possible to use simpler design?
Frank
>
> >
> > Frank
> >>
> >> Introduce explicit enqueue blocking and a wait queue to serialize access:
> >> enqueue operations now wait until abort or error handling has completed
> >> before proceeding. Enqueue is unblocked once the Ring is safely restarted.
> >>
> >> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> >> ---
> >> drivers/i3c/master/mipi-i3c-hci/core.c | 1 +
> >> drivers/i3c/master/mipi-i3c-hci/dma.c | 25 +++++++++++++++++++++++--
> >> drivers/i3c/master/mipi-i3c-hci/hci.h | 2 ++
> >> 3 files changed, 26 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> >> index bb8f2d830b0d..5e1bc6d819cf 100644
> >> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> >> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> >> @@ -976,6 +976,7 @@ static int i3c_hci_probe(struct platform_device *pdev)
> >>
> >> spin_lock_init(&hci->lock);
> >> mutex_init(&hci->control_mutex);
> >> + init_waitqueue_head(&hci->enqueue_wait_queue);
> >>
> >> /*
> >> * Multi-bus instances share the same MMIO address range, but not
> >> diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
> >> index 4cd32e3afa7b..314635e6e190 100644
> >> --- a/drivers/i3c/master/mipi-i3c-hci/dma.c
> >> +++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
> >> @@ -484,6 +484,12 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci,
> >>
> >> spin_lock_irq(&hci->lock);
> >>
> >> + while (unlikely(hci->enqueue_blocked)) {
> >> + spin_unlock_irq(&hci->lock);
> >> + wait_event(hci->enqueue_wait_queue, !READ_ONCE(hci->enqueue_blocked));
> >> + spin_lock_irq(&hci->lock);
> >> + }
> >> +
> >> if (n > rh->xfer_space) {
> >> spin_unlock_irq(&hci->lock);
> >> hci_dma_unmap_xfer(hci, xfer_list, n);
> >> @@ -539,6 +545,14 @@ static int hci_dma_queue_xfer(struct i3c_hci *hci,
> >> return 0;
> >> }
> >>
> >> +static void hci_dma_unblock_enqueue(struct i3c_hci *hci)
> >> +{
> >> + if (hci->enqueue_blocked) {
> >> + hci->enqueue_blocked = false;
> >> + wake_up_all(&hci->enqueue_wait_queue);
> >> + }
> >> +}
> >> +
> >> static bool hci_dma_dequeue_xfer(struct i3c_hci *hci,
> >> struct hci_xfer *xfer_list, int n)
> >> {
> >> @@ -550,12 +564,17 @@ static bool hci_dma_dequeue_xfer(struct i3c_hci *hci,
> >>
> >> guard(mutex)(&hci->control_mutex);
> >>
> >> + spin_lock_irq(&hci->lock);
> >> +
> >> ring_status = rh_reg_read(RING_STATUS);
> >> if (ring_status & RING_STATUS_RUNNING) {
> >> + hci->enqueue_blocked = true;
> >> + spin_unlock_irq(&hci->lock);
> >> /* stop the ring */
> >> reinit_completion(&rh->op_done);
> >> rh_reg_write(RING_CONTROL, rh_reg_read(RING_CONTROL) | RING_CTRL_ABORT);
> >> wait_for_completion_timeout(&rh->op_done, HZ);
> >> + spin_lock_irq(&hci->lock);
> >> ring_status = rh_reg_read(RING_STATUS);
> >> if (ring_status & RING_STATUS_RUNNING) {
> >> /*
> >> @@ -567,8 +586,6 @@ static bool hci_dma_dequeue_xfer(struct i3c_hci *hci,
> >> }
> >> }
> >>
> >> - spin_lock_irq(&hci->lock);
> >> -
> >> for (i = 0; i < n; i++) {
> >> struct hci_xfer *xfer = xfer_list + i;
> >> int idx = xfer->ring_entry;
> >> @@ -604,6 +621,8 @@ static bool hci_dma_dequeue_xfer(struct i3c_hci *hci,
> >> rh_reg_write(RING_CONTROL, RING_CTRL_ENABLE);
> >> rh_reg_write(RING_CONTROL, RING_CTRL_ENABLE | RING_CTRL_RUN_STOP);
> >>
> >> + hci_dma_unblock_enqueue(hci);
> >> +
> >> spin_unlock_irq(&hci->lock);
> >>
> >> return did_unqueue;
> >> @@ -647,6 +666,8 @@ static void hci_dma_xfer_done(struct i3c_hci *hci, struct hci_rh_data *rh)
> >> }
> >> if (xfer->completion)
> >> complete(xfer->completion);
> >> + if (RESP_STATUS(resp))
> >> + hci->enqueue_blocked = true;
> >> }
> >>
> >> done_ptr = (done_ptr + 1) % rh->xfer_entries;
> >> diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
> >> index f17f43494c1b..d630400ec945 100644
> >> --- a/drivers/i3c/master/mipi-i3c-hci/hci.h
> >> +++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
> >> @@ -54,6 +54,8 @@ struct i3c_hci {
> >> struct mutex control_mutex;
> >> atomic_t next_cmd_tid;
> >> bool irq_inactive;
> >> + bool enqueue_blocked;
> >> + wait_queue_head_t enqueue_wait_queue;
> >> u32 caps;
> >> unsigned int quirks;
> >> unsigned int DAT_entries;
> >> --
> >> 2.51.0
> >>
>
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-04-20 2:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-16 17:56 [PATCH 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
2026-04-16 17:56 ` [PATCH 01/16] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset Adrian Hunter
2026-04-17 6:37 ` Frank Li
2026-04-16 17:56 ` [PATCH 02/16] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring Adrian Hunter
2026-04-17 6:47 ` Frank Li
2026-04-16 17:56 ` [PATCH 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error Adrian Hunter
2026-04-17 6:56 ` Frank Li
2026-04-17 17:07 ` Adrian Hunter
2026-04-20 2:20 ` Frank Li [this message]
2026-04-20 11:59 ` Adrian Hunter
2026-04-16 17:56 ` [PATCH 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete Adrian Hunter
2026-04-16 17:56 ` [PATCH 05/16] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition Adrian Hunter
2026-04-17 7:01 ` Frank Li
2026-04-16 17:56 ` [PATCH 06/16] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path Adrian Hunter
2026-04-17 7:04 ` Frank Li
2026-04-16 17:56 ` [PATCH 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error Adrian Hunter
2026-04-17 8:11 ` Frank Li
2026-04-17 17:12 ` Adrian Hunter
2026-04-20 2:15 ` Frank Li
2026-04-16 17:56 ` [PATCH 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer Adrian Hunter
2026-04-16 17:56 ` [PATCH 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers Adrian Hunter
2026-04-16 17:56 ` [PATCH 10/16] i3c: mipi-i3c-hci: Add DMA ring abort " Adrian Hunter
2026-04-16 17:56 ` [PATCH 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper Adrian Hunter
2026-04-16 17:57 ` [PATCH 12/16] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors Adrian Hunter
2026-04-16 17:57 ` [PATCH 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete Adrian Hunter
2026-04-16 17:57 ` [PATCH 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time Adrian Hunter
2026-04-16 17:57 ` [PATCH 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation Adrian Hunter
2026-04-16 17:57 ` [PATCH 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aeWNfN0x-Ptsj1-g@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox