[PATCH] make madt parsing quieter

[PATCH] make madt parsing quieter

[Jesse Barnes]

[-- Attachment #1: Type: text/plain, Size: 267 bytes --]

We already get this info in other forms from other boot messages, so kill the 
printing of the MADT entries as they're parsed.  This patch significantly 
reduces the amount of output from a boot of a 512p system.

Signed-off-by: Jesse Barnes <jbarnes@sgi.com>

Jesse

[-- Attachment #2: acpi-madt-parse-quiet.patch --]
[-- Type: text/x-diff, Size: 2101 bytes --]

===== arch/ia64/kernel/acpi.c 1.71 vs edited =====
--- 1.71/arch/ia64/kernel/acpi.c	2004-05-24 22:32:34 -07:00
+++ edited/arch/ia64/kernel/acpi.c	2004-07-15 14:41:29 -07:00
@@ -171,8 +171,6 @@
 	if (BAD_MADT_ENTRY(lapic, end))
 		return -EINVAL;
 
-	acpi_table_print_madt_entry(header);
-
 	if (lapic->address) {
 		iounmap((void *) ipi_base_addr);
 		ipi_base_addr = (unsigned long) ioremap(lapic->address, 0);
@@ -191,25 +189,13 @@
 	if (BAD_MADT_ENTRY(lsapic, end))
 		return -EINVAL;
 
-	acpi_table_print_madt_entry(header);
-
-	printk(KERN_INFO "CPU %d (0x%04x)", total_cpus, (lsapic->id << 8) | lsapic->eid);
-
-	if (!lsapic->flags.enabled)
-		printk(" disabled");
-	else {
-		printk(" enabled");
+	if (lsapic->flags.enabled) {
 #ifdef CONFIG_SMP
 		smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid;
-		if (hard_smp_processor_id()
-		    == (unsigned int) smp_boot_data.cpu_phys_id[available_cpus])
-			printk(" (BSP)");
 #endif
 		++available_cpus;
 	}
 
-	printk("\n");
-
 	total_cpus++;
 	return 0;
 }
@@ -225,8 +211,6 @@
 	if (BAD_MADT_ENTRY(lacpi_nmi, end))
 		return -EINVAL;
 
-	acpi_table_print_madt_entry(header);
-
 	/* TBD: Support lapic_nmi entries */
 	return 0;
 }
@@ -242,8 +226,6 @@
 	if (BAD_MADT_ENTRY(iosapic, end))
 		return -EINVAL;
 
-	acpi_table_print_madt_entry(header);
-
 	iosapic_init(iosapic->address, iosapic->global_irq_base);
 
 	return 0;
@@ -262,8 +244,6 @@
 	if (BAD_MADT_ENTRY(plintsrc, end))
 		return -EINVAL;
 
-	acpi_table_print_madt_entry(header);
-
 	/*
 	 * Get vector assignment for this interrupt, set attributes,
 	 * and program the IOSAPIC routing table.
@@ -292,8 +272,6 @@
 	if (BAD_MADT_ENTRY(p, end))
 		return -EINVAL;
 
-	acpi_table_print_madt_entry(header);
-
 	iosapic_override_isa_irq(p->bus_irq, p->global_irq,
 				 (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
 				 (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
@@ -310,8 +288,6 @@
 
 	if (BAD_MADT_ENTRY(nmi_src, end))
 		return -EINVAL;
-
-	acpi_table_print_madt_entry(header);
 
 	/* TBD: Support nimsrc entries */
 	return 0;