[PATCH] fix phys. address conversion in ia64_pal_tr_read

[Jesse Barnes <jbarnes@engr.sgi.com>]

[-- Attachment #1: Type: text/plain, Size: 356 bytes --]

The palinfo module may call ia64_pal_tr_read using an IPI.  If the processor 
receiving the IPI is idle, the call will fail since the idle process stack is 
in region 5 and ia64_pal_tr_read uses __pa rather than ia64_tpa.  This small 
patch fixes the problem by making it use ia64_tpa instead.

Signed-off-by: Jesse Barnes <jbarnes@sgi.com>

Thanks,
Jesse

[-- Attachment #2: tr-info-fix-2.patch --]
[-- Type: text/plain, Size: 551 bytes --]

===== include/asm-ia64/pal.h 1.9 vs edited =====
--- 1.9/include/asm-ia64/pal.h	2003-11-25 00:23:21 -08:00
+++ edited/include/asm-ia64/pal.h	2004-11-15 17:07:51 -08:00
@@ -1531,7 +1531,7 @@
 ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
 {
 	struct ia64_pal_retval iprv;
-	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)__pa(tr_buffer));
+	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
 	if (tr_valid)
 		tr_valid->piv_val = iprv.v0;
 	return iprv.status;