[PATCH 4.19 032/639] signal/ia64: Use the generic force_sigsegv in setup_frame

[PATCH 4.19 032/639] signal/ia64: Use the generic force_sigsegv in setup_frame

[Greg Kroah-Hartman]

From: Eric W. Biederman <ebiederm@xmission.com>

[ Upstream commit 8b9c6b28312cc51a87055e292b11c5aa28f0c935 ]

The ia64 handling of failure to setup a signal frame has been trying
to set overlapping fields in struct siginfo since 2.3.43.  The si_pid
and si_uid fields are stomped when the si_addr field is set.  The
si_code of SI_KERNEL indicates that si_pid and si_uid should be valid,
and that si_addr does not exist.

Being at odds with the definition of SI_KERNEL and with nothing to
indicate that this was a signal frame setup failure there is no way
for userspace to know that si_addr was filled out instead.

In practice failure to setup a signal frame is rare, and si_pid and
si_uid are always set to 0 when si_code is SI_KERNEL so I expect no
one has looked closely enough before to see this weirdness.  Further
the only difference between force_sigsegv_info and the generic
force_sigsegv other than the return code is that force_sigsegv_info
stomps the si_uid and si_pid fields.

Remove the bug and simplify the code by using force_sigsegv in this
case just like other architectures.

Fixes: 2.3.43
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/signal.c | 50 ++++++++++-----------------------------
 1 file changed, 12 insertions(+), 38 deletions(-)

diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index d1234a5ba4c55..01fc133b2e4c8 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -231,37 +231,6 @@ rbs_on_sig_stack (unsigned long bsp)
 	return (bsp - current->sas_ss_sp < current->sas_ss_size);
 }
 
-static long
-force_sigsegv_info (int sig, void __user *addr)
-{
-	unsigned long flags;
-	struct siginfo si;
-
-	clear_siginfo(&si);
-	if (sig = SIGSEGV) {
-		/*
-		 * Acquiring siglock around the sa_handler-update is almost
-		 * certainly overkill, but this isn't a
-		 * performance-critical path and I'd rather play it safe
-		 * here than having to debug a nasty race if and when
-		 * something changes in kernel/signal.c that would make it
-		 * no longer safe to modify sa_handler without holding the
-		 * lock.
-		 */
-		spin_lock_irqsave(&current->sighand->siglock, flags);
-		current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
-		spin_unlock_irqrestore(&current->sighand->siglock, flags);
-	}
-	si.si_signo = SIGSEGV;
-	si.si_errno = 0;
-	si.si_code = SI_KERNEL;
-	si.si_pid = task_pid_vnr(current);
-	si.si_uid = from_kuid_munged(current_user_ns(), current_uid());
-	si.si_addr = addr;
-	force_sig_info(SIGSEGV, &si, current);
-	return 1;
-}
-
 static long
 setup_frame(struct ksignal *ksig, sigset_t *set, struct sigscratch *scr)
 {
@@ -295,15 +264,18 @@ setup_frame(struct ksignal *ksig, sigset_t *set, struct sigscratch *scr)
 			 * instead so we will die with SIGSEGV.
 			 */
 			check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
-			if (!likely(on_sig_stack(check_sp)))
-				return force_sigsegv_info(ksig->sig, (void __user *)
-							  check_sp);
+			if (!likely(on_sig_stack(check_sp))) {
+				force_sigsegv(ksig->sig, current);
+				return 1;
+			}
 		}
 	}
 	frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
 
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		return force_sigsegv_info(ksig->sig, frame);
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) {
+		force_sigsegv(ksig->sig, current);
+		return 1;
+	}
 
 	err  = __put_user(ksig->sig, &frame->arg0);
 	err |= __put_user(&frame->info, &frame->arg1);
@@ -317,8 +289,10 @@ setup_frame(struct ksignal *ksig, sigset_t *set, struct sigscratch *scr)
 	err |= __save_altstack(&frame->sc.sc_stack, scr->pt.r12);
 	err |= setup_sigcontext(&frame->sc, set, scr);
 
-	if (unlikely(err))
-		return force_sigsegv_info(ksig->sig, frame);
+	if (unlikely(err)) {
+		force_sigsegv(ksig->sig, current);
+		return 1;
+	}
 
 	scr->pt.r12 = (unsigned long) frame - 16;	/* new stack pointer */
 	scr->pt.ar_fpsr = FPSR_DEFAULT;			/* reset fpsr for signal handler */
-- 
2.20.1

[PATCH 4.19 033/639] signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn

[Greg Kroah-Hartman]

From: Eric W. Biederman <ebiederm@xmission.com>

[ Upstream commit b92adb74adde62d9a9780ff2977d63dcb21aeaa6 ]

The ia64 handling of failure to return from a signal frame has been trying
to set overlapping fields in struct siginfo since 2.3.43.  The si_code
corresponds to the fields that were stomped (not the field that is
actually written), so I can not imagine a piece of userspace code
making sense of the signal frame if it looks closely.

In practice failure to return from a signal frame is a rare event that
almost never happens.  Someone using an alternate signal stack to
recover and looking in detail is even more rare.  So I presume no one
has ever noticed and reported this ia64 nonsense.

Sort this out by causing ia64 to use force_sig(SIGSEGV) like other architectures.

Fixes: 2.3.43
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/signal.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 01fc133b2e4c8..9a960829a01d9 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -110,7 +110,6 @@ ia64_rt_sigreturn (struct sigscratch *scr)
 {
 	extern char ia64_strace_leave_kernel, ia64_leave_kernel;
 	struct sigcontext __user *sc;
-	struct siginfo si;
 	sigset_t set;
 	long retval;
 
@@ -153,14 +152,7 @@ ia64_rt_sigreturn (struct sigscratch *scr)
 	return retval;
 
   give_sigsegv:
-	clear_siginfo(&si);
-	si.si_signo = SIGSEGV;
-	si.si_errno = 0;
-	si.si_code = SI_KERNEL;
-	si.si_pid = task_pid_vnr(current);
-	si.si_uid = from_kuid_munged(current_user_ns(), current_uid());
-	si.si_addr = sc;
-	force_sig_info(SIGSEGV, &si, current);
+	force_sig(SIGSEGV, current);
 	return retval;
 }
 
-- 
2.20.1