RE: [Fwd: [Fwd: [Linux-ia64] ia64 redhat 7 beta]]

[Jonathan_Kwahk@Dell.com]

I have seen issues where entering the QLogic SCSI BIOS utility would hang
the system.  However, with the recent BIOS builds, I was able to enter the
set up with  no hangs and configure the SCSI drives.

I think I used build 60. 

J

-----Original Message-----
From: Uros Prestor [mailto:uros@turbolinux.com]
Sent: Tuesday, August 29, 2000 1:53 PM
To: dbb@sco.com
Cc: Matt_Domsch@exchange.dell.com; linux-ia64@linuxia64.org
Subject: Re: [Fwd: [Fwd: [Linux-ia64] ia64 redhat 7 beta]]


Doug Beattie wrote:

> 1. Does anyone else have a problem getting into the Qlogic Fast!Util
> on their IA64 system?

Yes.  Don't bother entering Qlogic setup on BigSurs -- the system will hang.

> I have to place the card into a 32 bit system to access the bios and
> make a change, then place it back into my BigSur to try it.

I was able to boot both test6 and test7 kernels on BigSurs without any
Qlogic
BIOS changes.  I had to enable >4G addressing on Lion systems when booting
test6 kernels.

Uros

--
Uros Prestor
uros@turbolinux.com




_______________________________________________
Linux-IA64 mailing list
Linux-IA64@linuxia64.org
http://lists.linuxia64.org/lists/listinfo/linux-ia64