[Linux-ia64] qla1280 SCSI controller problems?

[Linux-ia64] qla1280 SCSI controller problems?

[Broadfoot, KenX]

Hello folks,

Has anyone on this list seen the Lion lockup ( but not "crash" ) were
seemingly the SCSI hard drive becomes unaccessable?
The machine then requires a hard restart.

I have ONLY seen this in kernel 2.4.0-test8 and 2.4.0-test9.

I see typically when trying to insert a module or running a command like: du
-a *

--ken

RE: [Linux-ia64] qla1280 SCSI controller problems?

[Matt_Domsch]

Yes, under SMP.  Under UP it works great.  I don't know if it's a driver
problem or elsewhere.

Thanks,
Matt Domsch
Dell Enterprise Systems Group
Linux Development Team

-----Original Message-----
From: Broadfoot, KenX [mailto:kenx.broadfoot@intel.com]
Sent: Friday, October 13, 2000 12:09 PM
To: linux-ia64@linuxia64.org
Subject: [Linux-ia64] qla1280 SCSI controller problems?



Hello folks,

Has anyone on this list seen the Lion lockup ( but not "crash" ) were
seemingly the SCSI hard drive becomes unaccessable?
The machine then requires a hard restart.

I have ONLY seen this in kernel 2.4.0-test8 and 2.4.0-test9.

I see typically when trying to insert a module or running a command like: du
-a *

--ken


_______________________________________________
Linux-IA64 mailing list
Linux-IA64@linuxia64.org
http://lists.linuxia64.org/lists/listinfo/linux-ia64

Re: [Linux-ia64] qla1280 SCSI controller problems?

[Matt_Domsch]

Running kernel 2.4.0-test9 + the -test9 IA-64 patch + the buglet patch +
modutils 2.3.18, I no longer see the lockups waiting on spinlocks that I was
seeing.  (Cross my fingers, and let it run overnight...)

Thanks,
Matt


-----Original Message-----
From: Domsch, Matt 
Sent: Monday, October 16, 2000 8:23 PM
To: 'Uros Prestor'; Broadfoot, KenX
Cc: ia64-dist@turbolinux.com
Subject: RE: [ia64-dist] Re: [Linux-ia64] qla1280 SCSI controller
problems?


"Broadfoot, KenX" wrote:

> Has anyone on this list seen the Lion lockup ( but not "crash" ) were
> seemingly the SCSI hard drive becomes unaccessable?
> The machine then requires a hard restart.
>
> I have ONLY seen this in kernel 2.4.0-test8 and 2.4.0-test9.
>
> I see typically when trying to insert a module or running a command like:
du