* [Linux-ia64] iosapic.c NULL pointer deref
@ 2000-10-18 22:11 Matt_Domsch
2000-10-19 17:38 ` Mallick, Asit K
0 siblings, 1 reply; 2+ messages in thread
From: Matt_Domsch @ 2000-10-18 22:11 UTC (permalink / raw)
To: linux-ia64
In the 2.4.0-test8 and -test9 IA-64 patch, the file arch/ia64/dig/iosapic.c,
function pci_for_each_dev(), the bridge pointer can be NULL, but gets
dereferenced anyhow, causing a nice tombstone. I see this with an AMI
MegaRAID 471 card that happens to have two bridges on it. Putting in tests
against NULL, that routine doesn't blow up any longer, but interrupts are
not properly assigned to that card then, and eventually all SCSI
reads/writes time out.
I'm happy to work with whomever is responsible for this code to have it
properly assign interrupts to these cards.
Thanks,
Matt
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: [Linux-ia64] iosapic.c NULL pointer deref
2000-10-18 22:11 [Linux-ia64] iosapic.c NULL pointer deref Matt_Domsch
@ 2000-10-19 17:38 ` Mallick, Asit K
0 siblings, 0 replies; 2+ messages in thread
From: Mallick, Asit K @ 2000-10-19 17:38 UTC (permalink / raw)
To: linux-ia64
Matt,
This code was put in specifically for AMI MegaRaid controller and bridge
cards. Mike from Intel did the patch. Anyway, I am working on the IOSAPIC
code to fix a problem and would like to fix this problem also. Please let me
know if you have any suggestion.
Thanks,
Asit
> -----Original Message-----
> From: Matt_Domsch@Dell.com [mailto:Matt_Domsch@Dell.com]
> Sent: Wednesday, October 18, 2000 3:12 PM
> To: linux-ia64@linuxia64.org
> Cc: peterj@ami.com
> Subject: [Linux-ia64] iosapic.c NULL pointer deref
>
>
> In the 2.4.0-test8 and -test9 IA-64 patch, the file
> arch/ia64/dig/iosapic.c,
> function pci_for_each_dev(), the bridge pointer can be NULL, but gets
> dereferenced anyhow, causing a nice tombstone. I see this with an AMI
> MegaRAID 471 card that happens to have two bridges on it.
> Putting in tests
> against NULL, that routine doesn't blow up any longer, but
> interrupts are
> not properly assigned to that card then, and eventually all SCSI
> reads/writes time out.
>
> I'm happy to work with whomever is responsible for this code
> to have it
> properly assign interrupts to these cards.
>
> Thanks,
> Matt
>
>
> _______________________________________________
> Linux-IA64 mailing list
> Linux-IA64@linuxia64.org
> http://lists.linuxia64.org/lists/listinfo/linux-ia64
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-10-19 17:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-10-18 22:11 [Linux-ia64] iosapic.c NULL pointer deref Matt_Domsch
2000-10-19 17:38 ` Mallick, Asit K
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox