From: jbarnes@sgi.com (Jesse Barnes)
To: linux-ia64@vger.kernel.org
Subject: Re: [PATCH] sn2 module (& other misc.) fixes
Date: Tue, 05 Aug 2003 00:06:31 +0000 [thread overview]
Message-ID: <marc-linux-ia64-106004201526166@msgid-missing> (raw)
In-Reply-To: <marc-linux-ia64-106003174416756@msgid-missing>
On Mon, Aug 04, 2003 at 04:31:32PM -0700, David Mosberger wrote:
> >>>>> On Mon, 4 Aug 2003 14:14:04 -0700, jbarnes@sgi.com (Jesse Barnes) said:
>
> Jesse> This one goes on top of the one I sent you last week. I'm
> Jesse> shooting for making Linus' tree boot on sn2 as well...
>
> This one didn't apply for me. I just updated the to-linus-2.5 tree.
> Can you rediff against that?
Sure, does this one work for you?
Thanks,
Jesse
diff -Nru a/arch/ia64/sn/io/hwgfs/hcl.c b/arch/ia64/sn/io/hwgfs/hcl.c
--- a/arch/ia64/sn/io/hwgfs/hcl.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/io/hwgfs/hcl.c Mon Aug 4 17:02:37 2003
@@ -898,6 +898,5 @@
EXPORT_SYMBOL(hwgraph_info_get_next_LBL);
EXPORT_SYMBOL(hwgraph_info_export_LBL);
EXPORT_SYMBOL(hwgraph_info_unexport_LBL);
-EXPORT_SYMBOL(hwgraph_path_lookup);
EXPORT_SYMBOL(hwgraph_traverse);
EXPORT_SYMBOL(hwgraph_vertex_name_get);
diff -Nru a/arch/ia64/sn/io/machvec/iomv.c b/arch/ia64/sn/io/machvec/iomv.c
--- a/arch/ia64/sn/io/machvec/iomv.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/io/machvec/iomv.c Mon Aug 4 17:02:37 2003
@@ -73,3 +73,4 @@
SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT_MASK)
udelay(1);
}
+EXPORT_SYMBOL(sn_mmiob);
diff -Nru a/arch/ia64/sn/io/sn2/shub.c b/arch/ia64/sn/io/sn2/shub.c
--- a/arch/ia64/sn/io/sn2/shub.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/io/sn2/shub.c Mon Aug 4 17:02:37 2003
@@ -199,10 +199,9 @@
{
cnodeid_t cnode;
uint64_t longarg;
- vertex_hdl_t d;
int nasid;
- cnode = (cnodeid_t)hwgraph_fastinfo_get(d);
+ cnode = (cnodeid_t)file->f_dentry->d_fsdata;
switch (cmd) {
case SNDRV_SHUB_CONFIGURE:
diff -Nru a/arch/ia64/sn/io/sn2/shuberror.c b/arch/ia64/sn/io/sn2/shuberror.c
--- a/arch/ia64/sn/io/sn2/shuberror.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/io/sn2/shuberror.c Mon Aug 4 17:02:37 2003
@@ -52,7 +52,6 @@
hub_error_clear(nasid_t nasid)
{
int i;
- hubreg_t idsr;
/*
* Make sure spurious write response errors are cleared
diff -Nru a/arch/ia64/sn/kernel/sn2/cache.c b/arch/ia64/sn/kernel/sn2/cache.c
--- a/arch/ia64/sn/kernel/sn2/cache.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/kernel/sn2/cache.c Mon Aug 4 17:02:37 2003
@@ -8,7 +8,9 @@
*
*/
-#include <asm/pgalloc.h>
+#include <linux/module.h>
+#include <asm/cacheflush.h>
+#include <asm/system.h>
/**
* sn_flush_all_caches - flush a range of address from all caches (incl. L4)
@@ -26,3 +28,4 @@
flush_icache_range(flush_addr, flush_addr+bytes);
mb();
}
+EXPORT_SYMBOL(sn_flush_all_caches);
diff -Nru a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c
--- a/arch/ia64/sn/kernel/sn2/sn2_smp.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c Mon Aug 4 17:02:37 2003
@@ -41,6 +41,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mmzone.h>
+#include <linux/module.h>
#include <asm/processor.h>
#include <asm/irq.h>
@@ -214,6 +215,7 @@
}
}
+EXPORT_SYMBOL(sn_send_IPI_phys);
/**
* sn2_send_IPI - send an IPI to a processor
diff -Nru a/arch/ia64/sn/kernel/sn_ksyms.c b/arch/ia64/sn/kernel/sn_ksyms.c
--- a/arch/ia64/sn/kernel/sn_ksyms.c Mon Aug 4 17:02:37 2003
+++ b/arch/ia64/sn/kernel/sn_ksyms.c Mon Aug 4 17:02:37 2003
@@ -13,48 +13,25 @@
#include <linux/config.h>
#include <linux/module.h>
-
+#include <linux/mm.h>
#include <asm/machvec.h>
#include <asm/sn/intr.h>
-
-#include <linux/mm.h>
#include <asm/sn/sgi.h>
-extern vertex_hdl_t base_io_scsi_ctlr_vhdl[];
#include <asm/sn/types.h>
-extern cnodeid_t master_node_get(devfs_handle_t vhdl);
#include <asm/sn/arch.h>
-EXPORT_SYMBOL(base_io_scsi_ctlr_vhdl);
-EXPORT_SYMBOL(master_node_get);
+#include <asm/sn/bte.h>
+#include <asm/sal.h>
+#include <asm/sn/sn_sal.h>
#ifdef CONFIG_IA64_SGI_SN_DEBUG
EXPORT_SYMBOL(__pa_debug);
EXPORT_SYMBOL(__va_debug);
#endif
-/* Support IPIs for loaded modules. */
-EXPORT_SYMBOL(sn_send_IPI_phys);
-
-/* symbols referenced by partitioning modules */
-#include <asm/sn/bte.h>
EXPORT_SYMBOL(bte_copy);
EXPORT_SYMBOL(bte_unaligned_copy);
-#include <asm/sal.h>
EXPORT_SYMBOL(ia64_sal);
-EXPORT_SYMBOL(physical_node_map);
-
-#include <asm/sn/sn_sal.h>
EXPORT_SYMBOL(sal_lock);
-EXPORT_SYMBOL(sn_partid);
EXPORT_SYMBOL(sn_local_partid);
-EXPORT_SYMBOL(sn_system_serial_number_string);
-EXPORT_SYMBOL(sn_partition_serial_number);
-
-EXPORT_SYMBOL(sn_mmiob);
-
-/* added by tduffy 04.08.01 to fix depmod issues */
-#include <linux/mmzone.h>
-extern nasid_t master_nasid;
-EXPORT_SYMBOL(master_nasid);
-EXPORT_SYMBOL(sn_flush_all_caches);
diff -Nru a/include/asm-ia64/sn/xtalk/xtalk.h b/include/asm-ia64/sn/xtalk/xtalk.h
--- a/include/asm-ia64/sn/xtalk/xtalk.h Mon Aug 4 17:02:37 2003
+++ b/include/asm-ia64/sn/xtalk/xtalk.h Mon Aug 4 17:02:37 2003
@@ -19,7 +19,7 @@
/*
* User-level device driver visible types
*/
-typedef char xwidgetnum_t; /* xtalk widget number (0..15) */
+typedef int xwidgetnum_t; /* xtalk widget number (0..15) */
#define XWIDGET_NONE (-1)
next prev parent reply other threads:[~2003-08-05 0:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-04 21:14 [PATCH] sn2 module (& other misc.) fixes Jesse Barnes
2003-08-04 21:54 ` Christoph Hellwig
2003-08-04 22:01 ` Jesse Barnes
2003-08-04 22:04 ` Christoph Hellwig
2003-08-04 23:31 ` David Mosberger
2003-08-05 0:06 ` Jesse Barnes [this message]
2003-08-05 1:01 ` David Mosberger
2003-08-05 1:15 ` Jesse Barnes
2003-08-05 6:04 ` David Mosberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-linux-ia64-106004201526166@msgid-missing \
--to=jbarnes@sgi.com \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox