Re: problem in booting HP zx6000 with stock kernel 2.5.75

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[David Mosberger-Tang]

>>>>> On Sun, 09 Nov 2003 17:00:12 +0100, "Deepak Kumar Gupta, Noida" <dkumar@noida.hcltech.com> said:

  Deepak> Hello everybody I am trying to boot 2 CPU hp zx6000 machine
  Deepak> (ia64, itanium2) from STOCK kernel version 2.5.75. I have
  Deepak> followed following steps.

2.5.75?  Why such an old kernel?

  Deepak> Kindly provide me appropriate guidance.. , where am I wrong?

For a zx6000, you're better off configuring it as ZX1 system, rather
than GENERIC.  The latter should also work, but will be (slightly)
less efficient (and the kernel will be needlessly bigger).

  Deepak> I have following doubts: -

  Deepak> 1. Is it possible to build and run _stock_ kernel (not
  Deepak> redhat patched kernel, as redhat advanced distribution is
  Deepak> available on my machine) on hp zx6000 machine ?

Yes, but you do need something newer than 2.5.75.  Try 2.6.0-test9.

  Deepak> Do I need additional patches the stock kernel + ia64 patch ?

No patch is needed.  There still is a patch, but if you don't care
about the last drop of performance and/or early printk-support, you
don't need it.

BTW: The daily build-status of Linus' kernel tree can be found here:
       http://www.gelato.unsw.edu.au/kerncomp/
     You can also get know-to-be-good .config files from there.

Also, in the future you may want to use linux-ia64@vger.kernel.org for
such question, since that mailing list is focused on ia64.

	--david

RE: problem in booting HP zx6000 with stock kernel 2.5.75

[Ameya Mitragotri]

"Deepak Kumar Gupta, Noida" <dkumar@noida.hcltech.com> wrote in message
news:<Q08Y.87p.3@gated-at.bofh.it>...
> 5. The kernel hangs after uncompressing the kernel successfully.
Nothing is
> working here, neither keyboard nor anything else.

Which SCSI driver is configured? I had a qla driver and i faced a
panic while booting 2.6.0-test5. This patch solved my problem

http://www.ussg.iu.edu/hypermail/linux/kernel/0309.2/0331.html

Hope that helps,
Ameya

RE: problem in booting HP zx6000 with stock kernel 2.5.75

[Deepak Kumar Gupta, Noida]

> "Deepak Kumar Gupta, Noida" <dkumar@noida.hcltech.com> wrote 
> in message
> news:<Q08Y.87p.3@gated-at.bofh.it>...
> > 5. The kernel hangs after uncompressing the kernel successfully.
> Nothing is
> > working here, neither keyboard nor anything else.
> 
> Which SCSI driver is configured? I had a qla driver and i faced a
> panic while booting 2.6.0-test5. This patch solved my problem
> 
> http://www.ussg.iu.edu/hypermail/linux/kernel/0309.2/0331.html
> 

In my case after uncompressing the kernel, it just hangs. Even the SCSI disk
driver is not loaded, so i guess problem is some where else. I am using
Symbios (SYM53C8XX) driver. 

Thanks
Deepak.

RE: problem in booting HP zx6000 with stock kernel 2.5.75

[Alex Williamson]

On Sun, 2003-11-09 at 22:28, Deepak Kumar Gupta, Noida wrote:

> In my case after uncompressing the kernel, it just hangs. Even the SCSI disk
> driver is not loaded, so i guess problem is some where else. I am using
> Symbios (SYM53C8XX) driver. 
> 

Deepak,

   As David mentioned, 2.5.75 is rather old.  Please try 2.6.0-test9 and
start with one of the configs David pointed at on the Gelato URL.  If
you're using a VGA console, it's easy to configure the kernel to not get
output where you want it.  If you're trying to use a serial console,
make sure you're appending a 'console=ttyS0,<speed>n8' to your elilo
entry.  Note that it depends how you have your firmware setup as to
whether ttyS0 is the builtin UART port or the 'console' port on the
management port (if you have one).  You can check this in the EFI boot
option maintenance menu.  Choose one, and only one, UART port for the
console output device.  The PNP0501 entry is the builtin UART, the
HWP0002 is the management  port.  Also, the on-board scsi controller for
the zx6000 is the mpt fusion driver, not the sym driver.  Thanks,

	Alex

-- 
Alex Williamson                             HP Linux & Open Source Lab

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[Ian Wienand]

On Sun, Nov 09, 2003 at 10:57:22AM -0800, David Mosberger-Tang wrote:
> BTW: The daily build-status of Linus' kernel tree can be found here:
>        http://www.gelato.unsw.edu.au/kerncomp/
>      You can also get know-to-be-good .config files from there.

Actually I've been meaning to update and find a slightly better way to
handle these, it would be good if people could take a second to simply
forward to me (off list) the 2.6.0-test9 .config's they actually use
and what machine it runs on.  I'll put them up with a description and
use the info to improve the autocompiler.

Thanks,

-i
ianw@gelato.unsw.edu.au
http://www.gelato.unsw.edu.au

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[Jesse Barnes]

On Wed, Nov 12, 2003 at 04:46:51PM +1100, Ian Wienand wrote:
> On Sun, Nov 09, 2003 at 10:57:22AM -0800, David Mosberger-Tang wrote:
> > BTW: The daily build-status of Linus' kernel tree can be found here:
> >        http://www.gelato.unsw.edu.au/kerncomp/
> >      You can also get know-to-be-good .config files from there.
> 
> Actually I've been meaning to update and find a slightly better way to
> handle these, it would be good if people could take a second to simply
> forward to me (off list) the 2.6.0-test9 .config's they actually use
> and what machine it runs on.  I'll put them up with a description and
> use the info to improve the autocompiler.

Hi Ian, here's a patch that adds config files for sn2 and generic
builds.  I've been thinking that maybe arch/ia64/defconfig should be a
generic kernel though, one that can run on dig (tiger and NEC
preferably), zx1, and sn2 boxes, and that we have a couple of other
configs in arch/ia64 somewhere for specific machines.

Jesse

diff -Nru a/arch/ia64/configs/generic b/arch/ia64/configs/generic
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/arch/ia64/configs/generic	Thu Nov  6 13:57:49 2003
@@ -0,0 +1,737 @@
+#
+# Automatically generated make config: don't edit
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT 
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_TIME_INTERPOLATION=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_EFI=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_KERNEL_CONFIG=y
+CONFIG_IA64_L1_CACHE_SHIFT=7
+# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
+CONFIG_NUMA=y
+CONFIG_DISCONTIGMEM=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_IA64_MCA=y
+CONFIG_PM=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER\x18
+# CONFIG_IA64_PAL_IDLE is not set
+CONFIG_SMP=y
+# CONFIG_PREEMPT is not set
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IA64_SALINFO=y
+CONFIG_EFI_VARS=y
+CONFIG_NR_CPUSd
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+# CONFIG_ACPI_BUTTON is not set
+# CONFIG_ACPI_FAN is not set
+# CONFIG_ACPI_PROCESSOR is not set
+CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_RELAXED_AML is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+CONFIG_HOTPLUG=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_BOOT=y
+CONFIG_FUSION_MAX_SGE@
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_REPORT_LUNS=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_NETLINK_DEV=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+# CONFIG_INET_ECN is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=y
+# CONFIG_EEPRO100_PIO is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SK98LIN is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X\x1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Yv8
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_L1_SERIAL=y
+CONFIG_SGI_L1_SERIAL_CONSOLE=y
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_HCDP=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT%6
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# I2C Algorithms
+#
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+# CONFIG_DEBUG_INFO is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
diff -Nru a/arch/ia64/configs/sn2 b/arch/ia64/configs/sn2
--- /dev/null	Wed Dec 31 16:00:00 1969
+++ b/arch/ia64/configs/sn2	Thu Nov  6 13:57:49 2003
@@ -0,0 +1,687 @@
+#
+# Automatically generated make config: don't edit
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT 
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_TIME_INTERPOLATION=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_HP_ZX1 is not set
+CONFIG_IA64_SGI_SN2=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_EFI=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_KERNEL_CONFIG=y
+CONFIG_IA64_L1_CACHE_SHIFT=7
+# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
+CONFIG_NUMA=y
+CONFIG_DISCONTIGMEM=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_IA64_MCA=y
+CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_SIM is not set
+CONFIG_FORCE_MAX_ZONEORDER\x18
+# CONFIG_IA64_PAL_IDLE is not set
+CONFIG_SMP=y
+# CONFIG_PREEMPT is not set
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IA64_SALINFO=y
+# CONFIG_EFI_VARS is not set
+CONFIG_NR_CPUSd
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+# CONFIG_ACPI_BUTTON is not set
+# CONFIG_ACPI_FAN is not set
+# CONFIG_ACPI_PROCESSOR is not set
+CONFIG_ACPI_NUMA=y
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_RELAXED_AML is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+CONFIG_HOTPLUG=y
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_REPORT_LUNS=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_NETLINK_DEV=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+# CONFIG_INET_ECN is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SK98LIN is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN_BOOL is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X\x1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Yv8
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_L1_SERIAL=y
+CONFIG_SGI_L1_SERIAL_CONSOLE=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT%6
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# I2C Algorithms
+#
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_XFS_FS=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_DEVFS_FS is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+# CONFIG_DEBUG_INFO is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[Matthew Wilcox]

On Wed, Nov 12, 2003 at 08:51:29AM -0800, Jesse Barnes wrote:
> Hi Ian, here's a patch that adds config files for sn2 and generic
> builds.  I've been thinking that maybe arch/ia64/defconfig should be a
> generic kernel though, one that can run on dig (tiger and NEC
> preferably), zx1, and sn2 boxes, and that we have a couple of other
> configs in arch/ia64 somewhere for specific machines.
> diff -Nru a/arch/ia64/configs/generic b/arch/ia64/configs/generic
> diff -Nru a/arch/ia64/configs/sn2 b/arch/ia64/configs/sn2

Jesse and I discussed this yesterday.  To take advantage of the
new multiple-defconfigs scheme in 2.6, what we need to do is:

 - Create files called arch/ia64/configs/*_defconfig
 - To use them, type "make zx1_defconfig" (for example).
 - Keep them up to date ...

There's a bikeshed question about which configs to support.  I think
the rule is pretty simple -- if someone's willing to step up and maintain
the config for a platform, let's put it in.

I'd suggest we want to have defconfig as generic, then add configs/

 - zx1_defconfig
 - sn2_defconfig
 - dig_defconfig (should work for bigsur, lion, tiger boxes)
 - sim_defconfig

I don't mind maintaining the zx1_defconfig if nobody else wants to.

-- 
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[Jesse Barnes]

On Thu, Nov 13, 2003 at 02:51:43PM +0000, Matthew Wilcox wrote:
> Jesse and I discussed this yesterday.  To take advantage of the
> new multiple-defconfigs scheme in 2.6, what we need to do is:
> 
>  - Create files called arch/ia64/configs/*_defconfig
>  - To use them, type "make zx1_defconfig" (for example).
>  - Keep them up to date ...
> 
> There's a bikeshed question about which configs to support.  I think
> the rule is pretty simple -- if someone's willing to step up and maintain
> the config for a platform, let's put it in.
> 
> I'd suggest we want to have defconfig as generic, then add configs/
> 
>  - zx1_defconfig
>  - sn2_defconfig
>  - dig_defconfig (should work for bigsur, lion, tiger boxes)
>  - sim_defconfig
> 
> I don't mind maintaining the zx1_defconfig if nobody else wants to.

Sounds like a plan to me.  I'll take care of sn2_defconfig.  Seems like
these files should go in shortly after 2.6.0 releases so that people
have something usable for the stable kernel.

Jesse

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[Peter Chubb]

>>>>> "Jesse" = Jesse Barnes <jbarnes@sgi.com> writes:

Jesse> On Thu, Nov 13, 2003 at 02:51:43PM +0000, Matthew Wilcox wrote:
>> Jesse and I discussed this yesterday.  To take advantage of the new
>> multiple-defconfigs scheme in 2.6, what we need to do is:
>> 
>> - Create files called arch/ia64/configs/*_defconfig - To use them,
>> type "make zx1_defconfig" (for example).  - Keep them up to date
>> ...
>> 
>> There's a bikeshed question about which configs to support.  I
>> think the rule is pretty simple -- if someone's willing to step up
>> and maintain the config for a platform, let's put it in.
>> 
>> I'd suggest we want to have defconfig as generic, then add configs/

Are you planning for separate SMP and UP configs?

Peetr C

Re: problem in booting HP zx6000 with stock kernel 2.5.75

[Matthew Wilcox]

On Fri, Nov 14, 2003 at 09:45:29AM +1100, Peter Chubb wrote:
> >>>>> "Jesse" = Jesse Barnes <jbarnes@sgi.com> writes:
> 
> Jesse> On Thu, Nov 13, 2003 at 02:51:43PM +0000, Matthew Wilcox wrote:
> >> I'd suggest we want to have defconfig as generic, then add configs/
> 
> Are you planning for separate SMP and UP configs?

I wasn't.  These are only default configs; it's pretty straightforward
to turn an SMP config into a UP config.  Much more simple than maintaining
two configs which differ only in UP vs SMP.

-- 
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk

problem in booting HP zx6000 with stock kernel 2.4.18

[Deepak Kumar Gupta, Noida]

Hello everybody

I am trying to boot 2 CPU hp zx6000 machine (ia64, itanium2) from STOCK
kernel version 2.4.18. I have followed following steps.

1. I have downloaded the kernel from www.kernel.org . Also I have applied
ia64 patch (from
http://www.kernel.org/pub/linux/kernel/ports/ia64/v2.4/linux-2.4.18-ia64-020
226.bz2) on it  .

2. Now I have build the kernel (using make compressed) for ia64 processor
type generic.

3. I have copied vmlinuz.gz (using mcopy) to vfat mounted partition
(/boot/efi/efi/redhat) and made appropriate entries in elilo.conf. 

4. Now I have rebooted the system and tried to load the image using EFI
shell.

5. The kernel is not able to boot it stops executing after displaying
message "kernel bug at bootmem.c line:113!".

I have following doubts: -

1. Is it possible to build and run _stock_ kernel (not redhat patched
kernel) on hp zx6000 machine ? Do I need additional patches the stock kernel
2.4.18 + ia64 patch ?

PLEASE CC REPLY TO ME ALSO..

Thanks in advance..

Deepak Kumar Gupta
HCL Technologies Limited
NOIDA, UP
INDIA.

 

Re: problem in booting HP zx6000 with stock kernel 2.4.18

[Matthew Wilcox]

On Tue, Nov 18, 2003 at 11:57:29AM +0530, Deepak Kumar Gupta, Noida wrote:
> Hello everybody
> 
> I am trying to boot 2 CPU hp zx6000 machine (ia64, itanium2) from STOCK
> kernel version 2.4.18. I have followed following steps.

Why 2.4.18?  Could you try something more recent like 2.4.22?  2.4.18
is rather old (25-Feb-2002) and it doesn't seem reasonable to try to
track down this bug (I vaguely remember it ...) in such an old kernel.

-- 
"It's not Hollywood.  War is real, war is primarily not about defeat or
victory, it is about death.  I've seen thousands and thousands of dead bodies.
Do you think I want to have an academic debate on this subject?" -- Robert Fisk