* Re: [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
[not found] <bug-15283-11613@http.bugzilla.kernel.org/>
@ 2010-02-12 13:13 ` James Bottomley
0 siblings, 0 replies; only message in thread
From: James Bottomley @ 2010-02-12 13:13 UTC (permalink / raw)
To: bugzilla-daemon; +Cc: linux-scsi, linux-ide
On Fri, 2010-02-12 at 12:58 +0000, bugzilla-daemon@bugzilla.kernel.org
wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=15283
Adding cc to linux-ide because this looks to be a SATA controller error
>
> Summary: PROBLEM: kernel 2.6.32-7 will not boot -- could not
> find /dev/root Dell Vostro 1000
> Product: SCSI Drivers
> Version: 2.5
> Kernel Version: 2.6.32-7
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Other
> AssignedTo: scsi_drivers-other@kernel-bugs.osdl.org
> ReportedBy: imran.javeed@vocalink.com
> Regression: No
>
>
> Created an attachment (id=25002)
> --> (http://bugzilla.kernel.org/attachment.cgi?id=25002)
> .config file from kernel build
>
> [1.] One line summary of the problem: Upgrade to 2.6.32-7 will not boot(cannot
> recognize disk)
So what they're really going to need to debug this is a boot log showing
the failure, if you could attach one ... without that, you'll have to
hope that someone has a SB600 and can reproduce.
James
> [2.] Full description of the problem/report:
>
> I am trying to upgrade my kernel from 2.6.18-53 to 2.6.32-7, the problem i am
> having is that the 2.6.32 kernel will not recognize my SATA disk. I have a Dell
> Vostro 1000 & have happily been using linux(centos5) with no issues.
>
> Ive ensured the correct options have been set in .config, included libata, ahci
> within the kernel(they are not modules) and checked various other information
> sources on the net, but it still does not work.(this is the 3rd night now &
> still no fix)
>
> Hence my email to you to try & fix for me please?
>
> Attached is the information you require
>
> [3.] Keywords (i.e., modules, networking, kernel):
> SATA SB600 ATI
>
> [4.] Kernel information
> 2.6.32-7
> [4.1.] Kernel version (from /proc/version):
> CURRENT_VERSION == Linux version 2.6.18-53.el5PAE
> (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14))
> #1 SMP Mon Nov 12 02:55:09 EST 2007
>
> [4.2.] Kernel .config file:
> Attached
>
> [5.] Most recent kernel version which did not have the bug:
> That im using right now 2.6.18-53
>
> [6.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt) N/A
>
> [7.] A small shell script or example program which triggers the
> problem (if possible)
> N/A
>
> [8.] Environment
>
> [8.1.] Software (add the output of the ver_linux script here) Linux uhud
> 2.6.18-53.el5PAE #1 SMP Mon Nov 12 02:55:09 EST 2007 i686 athlon i386 GNU/Linux
>
> Gnu C 4.1.2
> Gnu make 3.81
> binutils 2.17.50.0.6
> util-linux 2.13-pre7
> mount 2.13-pre7
> module-init-tools 3.3-pre2
> e2fsprogs 1.39
> pcmciautils 014
> quota-tools 3.13.
> PPP 2.4.4
> isdn4k-utils 3.9
> Linux C Library 2.5
> Dynamic linker (ldd) 2.5
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> oprofile 0.9.2
> Sh-utils 5.97
> udev 095
> wireless-tools 28
> Modules Loaded ndiswrapper bridge vboxnetflt vboxdrv hidp l2cap
> bluetooth configfs sunrpc ip_conntrack_netbios_ns ipt_MASQUERADE iptable_nat
> ip_nat ipt_LOG ipt_REJECT xt_state ip_conntrack nfnetlink xt_multiport
> iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables
> x_tables ipv6 cpufreq_ondemand dm_mirror dm_multipath dm_mod video sbs
> backlight i2c_ec button battery asus_acpi ac parport_pc lp parport
> snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss joydev snd_seq_midi_event
> snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss sg snd_pcm ide_cd b44 cdrom
> snd_timer snd i2c_piix4 mii k8_edac i2c_core k8temp edac_mc soundcore hwmon
> serio_raw sdhci mmc_core snd_page_alloc ahci libata sd_mod scsi_mod ext3 jbd
> ehci_hcd ohci_hcd uhci_hcd
>
>
> [8.2.] Processor information (from /proc/cpuinfo):
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 104
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
> : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
> siblings : 2 core id : 0 cpu cores : 2 fdiv_bug :
> no hlt_bug : no f00f_bug : no coma_bug : no fpu
> : yes fpu_exception : yes cpuid level : 1 wp : yes flags
> : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
> ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 15
> model : 104
> model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping
> : 2 cpu MHz : 800.000 cache size : 512 KB physical id : 0
> siblings : 2 core id : 1 cpu cores : 2 fdiv_bug :
> no hlt_bug : no f00f_bug : no coma_bug : no fpu
> : yes fpu_exception : yes cpuid level : 1 wp : yes flags
> : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
> pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
> 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8legacy 3dnowprefetch
> ts fid vid ttp tm stc 100mhzsteps bogomips : 1601.16
>
> [8.3.] Module information (from /proc/modules):
>
> ndiswrapper 169360 0 - Live 0xf9023000
> bridge 53341 0 - Live 0xf8d9b000
> vboxnetflt 79400 0 - Live 0xf8d86000
> vboxdrv 103208 1 vboxnetflt, Live 0xf8d6b000 hidp 23105 2 - Live 0xf8d0d000
> l2cap 29633 5 hidp, Live 0xf8d04000 bluetooth 53925 2 hidp,l2cap, Live
> 0xf8d3e000 configfs 28753 1 - Live 0xf8cfb000 sunrpc 144253 1 - Live 0xf8d19000
> ip_conntrack_netbios_ns 6977 0 - Live 0xf8c84000 ipt_MASQUERADE 7745 3 - Live
> 0xf8c72000 iptable_nat 11205 1 - Live 0xf8ced000 ip_nat 20973 2
> ipt_MASQUERADE,iptable_nat, Live 0xf8cd5000 ipt_LOG 10177 1 - Live 0xf8c78000
> ipt_REJECT 9537 8 - Live 0xf8c7c000 xt_state 6209 7 - Live 0xf8c75000
> ip_conntrack 53025 5
> ip_conntrack_netbios_ns,ipt_MASQUERADE,iptable_nat,ip_nat,xt_state, Live
> 0xf8cc7000 nfnetlink 10713 2 ip_nat,ip_conntrack, Live 0xf8c51000 xt_multiport
> 7233 1 - Live 0xf8c5f000 iptable_filter 7105 1 - Live 0xf8c5c000 ip_tables
> 17029 2 iptable_nat,iptable_filter, Live 0xf8c62000 ip6t_REJECT 9409 1 - Live
> 0xf8c58000 xt_tcpudp 7105 53 - Live 0xf8c55000 ip6table_filter 6849 1 - Live
> 0xf8c3e000 ip6_tables 18181 1 ip6table_filter, Live 0xf8c4b000 x_tables 17349
> 10
> ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_REJECT,xt_state,xt_multiport,ip_tables,ip
> 6t_REJECT,xt_tcpudp,ip6_tables, Live 0xf8c45000
> ipv6 251393 21 ip6t_REJECT, Live 0xf8c88000 cpufreq_ondemand 10573 1 - Live
> 0xf8a35000 dm_mirror 28869 0 - Live 0xf8a3a000 dm_multipath 21577 0 - Live
> 0xf89ee000 dm_mod 58457 2 dm_mirror,dm_multipath, Live 0xf8a43000 video 19269 0
> - Live 0xf89f5000 sbs 18533 0 - Live 0xf89c2000 backlight 10049 0 - Live
> 0xf89ea000 i2c_ec 9025 1 sbs, Live 0xf89e6000 button 10705 0 - Live 0xf89e2000
> battery 13637 0 - Live 0xf89c8000 asus_acpi 19289 0 - Live 0xf896c000 ac 9157 0
> - Live 0xf8995000 parport_pc 29157 0 - Live 0xf89d9000 lp 15849 0 - Live
> 0xf89ad000 parport 37513 2 parport_pc,lp, Live 0xf89ce000 snd_hda_intel 24025 0
> - Live 0xf89bb000 snd_hda_codec 202689 1 snd_hda_intel, Live 0xf89fd000
> snd_seq_dummy 7877 0 - Live 0xf8992000 snd_seq_oss 32577 0 - Live 0xf89b2000
> joydev 13313 0 - Live 0xf898d000 snd_seq_midi_event 11073 1 snd_seq_oss, Live
> 0xf8989000 snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event, Live
> 0xf8999000 snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq, Live
> 0xf8985000 snd_pcm_oss 42945 0 - Live 0xf893b000 snd_mixer_oss 19009 1
> snd_pcm_oss, Live 0xf8966000 sg 35933 0 - Live 0xf895c000 snd_pcm 72133 3
> snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8972000 ide_cd 40033 0 - Live
> 0xf8951000
> b44 29133 0 - Live 0xf891c000
> cdrom 36705 1 ide_cd, Live 0xf8947000
> snd_timer 24645 2 snd_seq,snd_pcm, Live 0xf8925000 snd 52421 9
> snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_m
> ixer_oss,snd_pcm,snd_timer, Live 0xf892d000
> i2c_piix4 12237 0 - Live 0xf8902000
> mii 9409 1 b44, Live 0xf88fe000
> k8_edac 18177 0 - Live 0xf8916000
> i2c_core 23745 2 i2c_ec,i2c_piix4, Live 0xf890f000 k8temp 9537 0 - Live
> 0xf88db000 edac_mc 24977 1 k8_edac, Live 0xf8907000 soundcore 11553 1 snd, Live
> 0xf88d7000 hwmon 7365 1 k8temp, Live 0xf88d4000 serio_raw 10693 0 - Live
> 0xf88c8000 sdhci 21337 0 - Live 0xf8846000 mmc_core 27457 1 sdhci, Live
> 0xf88cc000 snd_page_alloc 13769 2 snd_hda_intel,snd_pcm, Live 0xf88be000 ahci
> 23621 2 - Live 0xf885f000 libata 115961 1 ahci, Live 0xf88e0000 sd_mod 24897 3
> - Live 0xf8857000 scsi_mod 132685 3 sg,libata,sd_mod, Live 0xf8879000
> ext3 123337 1 - Live 0xf889e000
> jbd 56553 1 ext3, Live 0xf886a000
> ehci_hcd 33229 0 - Live 0xf884d000
> ohci_hcd 23389 0 - Live 0xf8837000
> uhci_hcd 25549 0 - Live 0xf882f000
>
>
> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> 000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 01f0-01f7 : ide0
> 0220-022f : pnp 00:08
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 1080-1080 : motherboard
> 1080-1080 : pnp 00:08
> 8000-805f : motherboard
> 8000-8003 : ACPI PM1a_EVT_BLK
> 8004-8005 : ACPI PM1a_CNT_BLK
> 8008-800b : ACPI PM_TMR
> 8010-8015 : ACPI CPU throttle
> 8020-8027 : ACPI GPE0_BLK
> 8200-8200 : ACPI PM2_CNT_BLK
> 8204-8207 : ACPI PM1b_EVT_BLK
> 8400-840f : 0000:00:12.0
> 8410-841f : 0000:00:14.0
> 8410-8417 : piix4_smbus
> 8420-842f : 0000:00:14.1
> 8420-8427 : ide0
> 8430-8437 : 0000:00:12.0
> 8438-843f : 0000:00:12.0
> 8450-8453 : 0000:00:12.0
> 8454-8457 : 0000:00:12.0
> 9000-9fff : PCI Bus #01
> 9000-90ff : 0000:01:05.0
> ################################
> 00000000-0009dbff : System RAM
> 00000000-00000000 : Crash kernel
> 0009dc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000ccfff : Video ROM
> 000cd000-000cdfff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-a7e6ffff : System RAM
> 00400000-006075e0 : Kernel code
> 006075e1-006de9bb : Kernel data
> a7e70000-a7e7ffff : ACPI Tables
> a7e80000-a7efffff : ACPI Non-volatile Storage a7f00000-afffffff : reserved
> c0000000-c0003fff : 0000:00:14.2
> c0000000-c0003fff : ICH HD audio
> c0004000-c00043ff : 0000:00:12.0
> c0004000-c00043ff : ahci
> c0004400-c00044ff : 0000:00:13.5
> c0004400-c00044ff : ehci_hcd
> c0005000-c0005fff : 0000:00:13.0
> c0005000-c0005fff : ohci_hcd
> c0006000-c0006fff : 0000:00:13.1
> c0006000-c0006fff : ohci_hcd
> c0007000-c0007fff : 0000:00:13.2
> c0007000-c0007fff : ohci_hcd
> c0008000-c0008fff : 0000:00:13.3
> c0008000-c0008fff : ohci_hcd
> c0009000-c0009fff : 0000:00:13.4
> c0009000-c0009fff : ohci_hcd
> c0100000-c01fffff : PCI Bus #01
> c0100000-c010ffff : 0000:01:05.0
> c0120000-c013ffff : 0000:01:05.0
> c0200000-c02fffff : PCI Bus #05
> c0200000-c0203fff : 0000:05:00.0
> c0200000-c0203fff : ndiswrapper
> c0300000-c03fffff : PCI Bus #08
> c0300000-c0301fff : 0000:08:00.0
> c0300000-c0301fff : b44
> c0302800-c03028ff : 0000:08:01.0
> c0302800-c03028ff : sdhci:slot0
> c0302c00-c0302cff : 0000:08:01.1
> c8000000-cfffffff : PCI Bus #01
> c8000000-cfffffff : 0000:01:05.0
> e0000000-efffffff : reserved
> fec00000-fec0ffff : reserved
> fed00000-fed003ff : 0000:00:14.0
> fee00000-fee00fff : reserved
> fff80000-ffffffff : reserved
> 100000000-14fffffff : System RAM
>
>
>
> [8.5.] PCI information ('lspci -vvv' as root) 00:00.0 Host bridge: ATI
> Technologies Inc RS480 Host Bridge (rev 10)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort+ <MAbort+ >SERR- <PERR-
> Latency: 64
>
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: c0100000-c01fffff
> Prefetchable memory behind bridge: 00000000c8000000-00000000cff00000
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [44] HyperTransport: MSI Mapping
> Capabilities: [b0] #0d [0000]
>
> 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
> Link: Speed 2.5Gb/s, Width x16
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 0, PowerLimit 0.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd Off, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [b0] #0d [0000]
> Capabilities: [b8] HyperTransport: MSI Mapping
>
> 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal
> decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c0200000-c02fffff
> Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 0, PowerLimit 25.000000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> Slot: AttnInd Off, PwrInd Off, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [b0] #0d [0000]
> Capabilities: [b8] HyperTransport: MSI Mapping
>
> 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01
> [AHCI 1.0])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 209
> Region 0: I/O ports at 8438 [size=8]
> Region 1: I/O ports at 8454 [size=4]
> Region 2: I/O ports at 8430 [size=8]
> Region 3: I/O ports at 8450 [size=4]
> Region 4: I/O ports at 8400 [size=16]
> Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 177
> Region 0: Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 185
> Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 193
> Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 185
> Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10
> [OHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin C routed to IRQ 193
> Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K]
>
> 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
> (prog-if 20 [EHCI])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 64 bytes
> Interrupt: pin D routed to IRQ 201
> Region 0: Memory at c0004400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Bridge: PM- B3+
> Capabilities: [e4] Debug port
>
> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Region 0: I/O ports at 8410 [size=16]
> Region 1: Memory at fed00000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [b0] HyperTransport: MSI Mapping
>
> 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP
> PriP])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 177
> Region 0: I/O ports at <ignored>
> Region 1: I/O ports at <ignored>
> Region 2: I/O ports at <unassigned>
> Region 3: I/O ports at <unassigned>
> Region 4: I/O ports at 8420 [size=16]
>
> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin ? routed to IRQ 177
> Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
> [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=08, subordinate=0a, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: c0300000-c03fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Capabilities: [80] HyperTransport: Host or Secondary Interface
> !!! Possibly incomplete decoding
> Command: WarmRst+ DblEnd-
> Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO-
> <CRCErr=8
> Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
> Revision ID: 1.02
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
> Map
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
> Controller
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Capabilities: [f0] #0f [0010]
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress
> 200] (prog-if 00 [VGA])
> Subsystem: Dell Unknown device 022a
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 255 (2000ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
> Region 1: I/O ports at 9000 [size=256]
> Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 05:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev
> 01)
> Subsystem: Dell Unknown device 0007
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 193
> Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express Legacy Endpoint IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <4us, L1 unlimited
> Device: AtnBtn- AtnInd- PwrInd-
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
> Link: Latency L0s <4us, L1 <64us
> Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [13c] Virtual Channel
>
> 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev
> 02)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 225
> Region 0: Memory at c0300000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:01.0 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev
> 22)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 217
> Region 0: Memory at c0302800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
> Subsystem: Dell Unknown device 022a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 9
> Region 0: Memory at c0302c00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>
> [8.6.] SCSI information (from /proc/scsi/scsi)
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: ATA Model: FUJITSU MHY2160B Rev: 0085
> Type: Direct-Access ANSI SCSI revision: 05
>
> [8.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
> [X.] Other notes, patches, fixes, workarounds:Hello
>
^ permalink raw reply [flat|nested] only message in thread